Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


C Meter Click Board

C Meter Click Board



Camera Click Board

The Camera Click Board is a popular add-on board that allows user to see the world through the eye of an OV767-VL2A low voltage CMOS image sensor. The sensor is connected to an on-board FT900 MCU via a parallel camera interface, which in turn, outputs the camera image to the target board through the MikroBUS SPI interface (CS, SCK, MISO, MOSI).



CAN Isolator Click Board

The CAN Isolator Click Board provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter.

The click is designed to run on either 3.3V or 5V power supply. CAN Isolator click communicates with the target microcontroller over UART interface.



CAN SPI 3.3V Click Board

The MikroE CAN SPI 3.3V Click Board is known to be the best accessory board designed to add CAN (Controller Area Network) connectivity to the microcontroller with SPI interface. The 3.3V version is exclusively designed for serial communication on 3.3V microcontrollers. The communication board features a high-speed SN65HVD230 CAN transceiver that serves as the interface between a CAN protocol controller and the physical bus. It provides a CAN serial communication physical layer in accordance with the ISO 11898 standard. CAN SPI click



CAN SPI 5V Click Board

The CAN SPI 5V Click Board is a highly reliable communication board intended to add serial CAN connectivity to user microcontroller with SPI interface. The 5V version is exclusively designed for communication on 5V microcontrollers. The accessory click board features MCP2551, high-speed CAN transceiver that serves as the interface between a CAN protocol controller and the physical bus. The CAN transceiver circuit provides a CAN serial communication physical layer in accordance with the ISO 11898 standard. The board has screw terminals to ensure easy and secure connectivity, power LED, and node termination jumper. It supports connection with up to 112 nodes. Designed to operate in especially-harsh environments, CAN SPI click 5V provides cross-wire protection, loss-of-ground and over-voltage protection, over-temperature protection, as well as wide common-mode range. It uses a 5V power supply only.

CAN SPI click 5V is an ideal choice for industrial automation, home automation, as well as in automotive and mobile machine industry.

Note: To add CAN SPI function to a 3.3V system, see the CAN SPI Click 3.3V board.



CAN-1 Board

The CAN-1 Board is an accessory board that allows user to add CAN (Controller Area Network) connectivity to the design. Developed with integrated CAN support, the board features a high-speed MCP2551 CAN transceiver that works as the interface between a CAN protocol controller and the physical bus. It operates at speeds of up to 1 Mb/s and is suitable for 12V and 24V systems. The CAN-1 Board implements ISO-11898 standard physical layer requirements. It allows up to 112 nodes to be connected. The board can be connected into a development system via a female IDC10 connector. The DIP switch facilitates the user to choose which pins are used for RX/TX. The CAN-1 board is designed to operate using a 5V power supply only. When connecting to a 3.3V development system, careful use of voltage translators is advisable.

The CAN-1 board is an ideal option for industrial automation, home automation, automotive and mobile machine industry, and many more.




The CANSPI is an easy to use, compact accessory board that allows user to connect a CAN (Controller Area Network) bus to any microcontroller with Serial Peripheral Interface (SPI). The board employs both an MCP2515 CAN controller and an MCP2551 CAN transceiver. The MCP2515 circuit used as a CAN controller allows for data exchange with microcontrollers using a standard SPI communication interface. On the other hand, the transceiver MCP2551 chip provides necessary signal adjustments and allows the signals to be sent/received at a 1 Mb/s. The CANSPI board allows for transmitting and receiving both standard and extended data and remote frames.

It makes an ideal option for users looking to connect CAN to a microcontroller without integrated CAN support. Applications like, industrial automation, home automation as well as automotive and mobile machine industry are well-suited for CAN-SPI board.



Cap Extend 3 Click Board

The Cap Extend 3 Click Board features four capacitive sensor pads integrated on the PCB, that can sense touch through a variety of different materials. This click can sense touch through plastic, wood, or even metal, thanks to the proprietary Metal over Capacitive technology. All these materials can be used to protect the surface of the PCB and sensor pad traces, allowing implementation of all kinds of human-machine interfaces and seamless integration of the touch-sensitive buttons into various kinds of front panels. The click also features a connector used for connecting to external sensors.



Cap Extend Click Board

Cap Extend Click Board



Cap Touch Click Board

The Cap Touch Click Board is a capacitive touch sensing button, integrated on a click board™. It can be activated by touch. This click can sense touch even through plastic, wood, or other dielectric materials, which can be used to protect the surface of the PCB and the sensor pad trace itself. Unlike the mechanical button, the capacitive touch button lasts much longer, it is not prone to damage and wear over time and it is very reliable.



CapSense Click Board

Introduce capacitive sensing elements to the design with CapSense click! This compact add-on board incorporates a CY8C201A0 capacitive controller and capacitive sensing elements. The CY8C201A0 capacitive sensing module works by taking human body capacitance as an input and directly provides the real time sensor information. The capacitive sensing elements include: a 5-segment slider and two buttons, for touch interfacing. This capacitive sensing board also contains two LEDS inside each button for backlighting. The LED diode (Green) indicates the power supply status. CapSense click is configured through an I2C port and communicates with the target board MCU through MikroBUS I2C (SDA, SCL), AN, and RST lines. The CY8C201A0 IC features high immunity against radiated and conductive noise. Featuring industry



CC3000 Click Board

The CC 3000 Click Board™ is an add-on board in mikrobus form factor which carries a CC3000 IC and a ceramic antenna for adding WiFi functionality without requiring too much Wi-Fi or RF expertise