MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
CO (Carbon Monoxide) Click Board
CO click is a simplified way of adding a highly sensitive carbon monoxide (CO) sensor to the user.
Color 2 Click Board
The colour 2 Click Board is a compact add-on board that allow the user to introduce colour sensing functionality to the design. It features an ISL29125 RGB colour light sensor that aids user to detect red, green and blue in a variety of lighting conditions. It outputs data from 5.7m lux-10,000 lux, providing an accurate spectral response by converting colours into 12 or 16-bit data. The user can select the range (narrower vs. wider bandwidth) and output resolution (12 vs. 16 bit). Featuring an integrated ADC, the colour 2 click rejects 50Hz and 60Hz flicker from artificial light sources. Along with that, ISL29125 chip has an IR blocking filter, which means it can reliably operate under dark glass covers. colour 2 click communicates with the target microcontroller through the MikroBUS I2C interface (SCL and SDA pins). A programmable interrupt pin provides additional functionality. It works using a 3.3V power supply only.
The colour 2 Click Board is an ideal choice for an ambient light colour detector, dynamic display colour balancing, OLED display ageing compensation, printer colour enhancement and much more.
Color 3 Click Board
The colour 3 Click Board is a MikroBUS add-on board with a TCS3771 colour sensor (also known as a light-to-digital converter) and a narrow beam Infrared LED. The circuit can also function as a proximity sensor.
Color Click Board
Add colour sensing functionality to your device with the MikroE colour Click Board. This compact accessory board employs TCS3471 colour light-to-digital converter sensor, three NPN resistor-equipped transistors, as well as RGB LED diode. With a resolution up to 16 bits, the TCS3471 colour light sensor provides red, green, blue, and clear light sensing (RGBC) that detects light intensity under a variety of lighting conditions and through a variety of attenuation materials. colour click uses the MikroBUS I2C lines (SDA and SCK) to communicate with the target microcontroller, and uses 3 digital output lines to drive RGB LED. Featuring a programmable interrupt function, it reduces micro-processor interrupt overhead. The board is designed to use a 3.3V power supply only.
In the absence of any light source, RGB LED provides light for illumination of objects. colour click is an ideal choice for RGB LED backlight control, light colour temperature monitor, industrial process control, medical diagnostic equipment, healthcare/medical, and many more.
Compact Flash Board
The Compact Flash Board is a compactly designed development board designed to be compatible with CompactFlash cards. It is used to connect a development board to any compact flash memory card using IDC10 connectors provided on flat cables. The CompactFlash Board uses a parallel communication interface to provide fast data transfer between the CF memory card and input/output pins of the microcontroller provided on the development system. This CF board enable user to create an interface to CF cards or PCMCIA cards in CompactFlash form. It provides complete PCMCIA-ATA functionality and compatibility.
Some prominent consumer electronics companies have also produced next-generation CF technology products for consumer market. The on-board LED indicator denotes the power status. It is designed to use a 5V power supply only.
Comparator Click Board
The Comparator click from MikroElektronika is a voltage comparator on a click add-on board carrying LM2903 chip. This LM2903 IC features two independent voltage comparators, two pairs of screw terminals (additional two screw terminals are for GND connections), and two potentiometers.
It can be used with either single or dual power supply over a wide range of voltages. The screw terminals allow the user to connect separate inputs, while the two potentiometers, placed between the screw terminals and the IC, configure the set point voltage. Each input has its own interrupt pin on the socket, i.e., one through the MikroBUS INT pin, the other in place of the default MikroBUS AN pin. The Comparator click is designed to use either a 3.3V or a 5V power supply.
Compass Click Board
Now add compass to your design using the new Compass click board from MikroElektronika to your design. This accessory board incorporates an ultra-compact LSM303DLHC e-compass module that showcases low power consumption and high performance. The module has a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. It also features 3 magnetic field channels and 3 acceleration channels. Compass click provides a 16-bit data output through I2C serial bus interface.
Designed to just plug directly into a MikroBUS socket after soldering the header pins, the module features two independent programmable interrupt generators meant for free-fall and motion detection. The IC interface transmits readings, which are processed, and used to determine the earth's magnetic north pole. Compass Click communicates with the target board MCU through the MikroBUS I2C (SDA, SCL), INT and RST lines.
It makes an ideal choice for a range of applications, including a compensated compass, position detection, map rotation, pedometer, display orientation, and many more. It is designed to support 3.3V power supply only.
Introduce fast and exceptional quality graphics even on 8-bit microcontrollers with little RAM and Flash using ConnectEVE. The board components include a FT800Q graphic controller and a 480x272 pixel 4.3" TFT colour display AT043B35 with LED backlight. Twelve components (widgets) supported by FT800Q chip, transparency support, anti-aliasing and other features will make your designs shine. Featuring 3-in-1 functionality including display, audio, and touch operations, the ConnectEVE board is primarily designed to be used as an additional display on MikroElektronika Easy development boards. The display is driven by a HX8257 display controller that delivers unparalleled graphic performance with each pixel displaying 262K different colours.
To provide input functionality, the TFT display is covered with a resistive touch panel. The ConnectEVE board has two headers (2x5 and 1x10) for simple connection with other development boards and peripheral devices. Furthermore, it has mounting holes to the corners for simple integration.
Counter Click Board
The Counter Click is an accessory board designed to keep the DC motor shafts in check. Featuring the LS7366R quadrature counter, Counter click board uses the MikroBUS SPI interface (CSK, MISO, MOSI), plus enable (CNT EN) and interrupt (LFLAG or DFLAG) pins for communication with the target board microcontroller. The 32-bit quadrature counter is to be used with a rotary encoder to quantify the speed and direction of rotation of DC motor shafts. It enables the user to calculate the number of rotations of a shaft precise when things get blur to the naked human eye. The rotary encoder on a DC motor outputs ENCA and ENCB signals which are out of phase to each other. For decoding the signal, the other end of these wires is connected to the pinout on the top of the board for interfacing with incremental encoders. In addition to ENCA and ENB, the pinout aboard the Counter click also an ENCI pin, which is a programmable index. The board is designed to operate using either a 3.3V or 5V power supply.
Counter click is an ideal choice for applications that include measurement of the direction and RPM of DC motor shafts.
Current Click Board
The MikroE Current Click is a complete electric current measurement solution that supports bandwidth up to 500 kHz. This add-on board includes a high-speed, voltage output INA196 current shunt monitor, a 12-bit resolution MCP3201 ADC, a low-dropout, micropower MAX6106 voltage reference, as well as two on-board screw terminals.
The package includes four shunts with different values: 0.05.
DAC 2 Click Board
The DAC 2 Click Board is based on the LTC2601CDD, a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (?15mA, Min) and double-buffered data latches.