Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

EasyBuzz Board

The EasyBuzz Board is an accessory board featuring a piezo buzzer capable of emitting audio signals. It is required to generate a voltage signal of specified frequency in order to operate the piezo buzzer normally. The on-board piezo speaker is capable of playing sound frequencies in the range between 20 Hz and 20 kHz. However, the resonant frequency of piezo speaker is 3.8 kHz and the best sound quality is achieved using frequencies between 2 kHz and 4 kHz. A DIP switch further aids in configuring board connections. The buzzer driver can be provided with a digital signal or a pulse-width modulated signal, where sound pitch is regulated by the PWM frequency, and sound volume can be adjusted by changing the PWM duty cycle. It has a female IDC10 connector. The EasyBuzz Board supports both 3.3V and 5V systems.

With such features, the Piezo Speaker add-on board is an ideal choice for adding audio signalization to any prototype device.

MIKROE-478

$16.13

EasyConnect 2 Board

The EasyConnect 2 Board is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board small screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation. The EasyConnect2 Board has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika

MIKROE-194

$5.41

EasyConnect Board

The EasyConnect Board is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation. The EasyConnect Board has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika

MIKROE-128

$4.83

EasyFT90x v7 Development Board

EasyFT90x v7 Development Board

MIKROE-1770

$182.66

EasyFT90x v7 MCU card with FT900 QFN-100

EasyFT90x v7 MCU card with FT900 QFN-100

MIKROE-1872

$23.19

EasyGSM/GPRS GM862 Board

EasyGSM/GPRS GM862

MIKROE-497

$20.30

EasyInput Board

Simulate different kinds of inputs in the design using the EasyInput Board. This accessory board is designed to provide digital logic input to desired IDC10 PORT header. The board comes equipped with a tri-state DIP switch for eight PORT pins. Popularly used in static input applications, the DIP switch provides user an easy and convenient way (simple push of a switch) to apply constant voltage (VCC or GND) on desired port inputs. The middle position leaves the pin unaffected.

The EasyInput Board has an IDC10 connector that ensures easy connection to peripheral modules. Also, this accessory board is most commonly used to customize the behavior of an electronic device to accommodate to wide range of applications.

MIKROE-1025

$5.70

EasyLED Board with Green LEDs

Now easily add LED signals to the design using the EasyLED G Board. The EasyLED Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with Green LEDs. Alternative boards are available fitted with red and yellow LEDs.

The EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.

The user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.

MIKROE-572

$15.93

EasyLED Board with Red LEDs

Now easily add LED signals to the design using the EasyLED R Board. The EasyLED R Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with red LEDs. Alternative boards are available fitted with green and yellow LEDs.

The EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.

The user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.

MIKROE-571

$15.93

EasyLED Board with Yellow LEDs

Now easily add LED signals to the design using the EasyLED Y Board. The EasyLED Y Board is a cost-effective yet effective solution for visual indication of output signals. Featuring 8 surface mounted LEDs, the EasyLED Board is used to connect a development system port to LEDs. It features two IDC10 header connectors; one female header (CN2) and one male header (CN1). The user can connect a prototype device using its female IDC10 connector, or can be wired to your system using the make 2x5 pin header. These header connectors make EasyLED Board highly compatible with all development boards. The board supports 3.3V or 5V power supply voltage. This board is supplied with Yellow LEDs. Alternative boards are available fitted with red and green LEDs.

The EasyLED Board is used to indicate the logic level on the development system ports. When a pin is driven high (logic 1), the appropriate LED connected to that pin gets illuminated. Similarly, if a pin is driven low (logic 0), the appropriate LED remains off.

The user can use the EasyLED board with EasyPULL board in order to provide the device pin to VCC or GND via resistors and have visual indication of output signals via LED.

MIKROE-573

$15.93

EasyMx PRO v7 for Stellaris

The EasyMx PRO v7 for Stellaris

MIKROE-972

$171.84

EasyMx PRO v7 for STM32

EasyMx PRO v7 for STM32

MIKROE-1099

$163.33