Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


Color 7 Click Board

The Color 7 click is a very accurate colour sensing Click board™ which features the TCS3472 color light to digital converter with IR filter, from ams. It contains a 3x4 matrix of photosensitive elements, which can sense red, green, blue and clear light component. Additional IR resistive coating reduces the influence of the IR component of the light spectrum. Four low noise 16bit ADCs ensure the high dynamic range, making this sensor suitable to be used behind dark glass. This sensor offers a fast I2C interface for the communication with the host MCU. Ability to measure light without the influence of the IR makes this device a good choice for Ambient Light Sensing (ALS).



Color 8 Click Board

Color 8 click is a color-sensing Click board™, a part of our sensor Click board™ line. Sensing the color by utilizing ROHM’s BH1749NUC, an integrated color sensor IC, it comes in the package which also includes the mikroSDK™ software, a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board. It is perfect for sensing the subtle light changes, as it is equipped not only with the red, green, and blue (RGB) but also the infra-red sensor, allowing a very accurate measurement of the subtlest changes in light.

Color 8 Click board™ is an ideal solution for LED lighting color management, display color correction on mobile devices, TFT display color correction, and other similar applications that require accurate color sensing.



Color Click Board

Add colour sensing functionality to your device with the MikroE colour Click Board. This compact accessory board employs TCS3471 colour light-to-digital converter sensor, three NPN resistor-equipped transistors, as well as RGB LED diode. With a resolution up to 16 bits, the TCS3471 colour light sensor provides red, green, blue, and clear light sensing (RGBC) that detects light intensity under a variety of lighting conditions and through a variety of attenuation materials. colour click uses the MikroBUS I2C lines (SDA and SCK) to communicate with the target microcontroller, and uses 3 digital output lines to drive RGB LED. Featuring a programmable interrupt function, it reduces micro-processor interrupt overhead. The board is designed to use a 3.3V power supply only.

In the absence of any light source, RGB LED provides light for illumination of objects. colour click is an ideal choice for RGB LED backlight control, light colour temperature monitor, industrial process control, medical diagnostic equipment, healthcare/medical, and many more.



Compact Flash Board

The Compact Flash Board is a compactly designed development board designed to be compatible with CompactFlash cards. It is used to connect a development board to any compact flash memory card using IDC10 connectors provided on flat cables. The CompactFlash Board uses a parallel communication interface to provide fast data transfer between the CF memory card and input/output pins of the microcontroller provided on the development system. This CF board enable user to create an interface to CF cards or PCMCIA cards in CompactFlash form. It provides complete PCMCIA-ATA functionality and compatibility.

Some prominent consumer electronics companies have also produced next-generation CF technology products for consumer market. The on-board LED indicator denotes the power status. It is designed to use a 5V power supply only.



Comparator Click Board

The Comparator click from MikroElektronika is a voltage comparator on a click add-on board carrying LM2903 chip. This LM2903 IC features two independent voltage comparators, two pairs of screw terminals (additional two screw terminals are for GND connections), and two potentiometers.

It can be used with either single or dual power supply over a wide range of voltages. The screw terminals allow the user to connect separate inputs, while the two potentiometers, placed between the screw terminals and the IC, configure the set point voltage. Each input has its own interrupt pin on the socket, i.e., one through the MikroBUS INT pin, the other in place of the default MikroBUS AN pin. The Comparator click is designed to use either a 3.3V or a 5V power supply.



Compass 2 Click Board

The Compass 2 click carries the AK8963 3-axis electronic compass. The AK8963 sensor is based on the Hall effect. The click is designed to run on a 3.3V power supply only. It communicates with the target microcontroller through either I2C or SPI interface, with additional functionality provided by the INT pin on the mikroBUS™ line..



Compass Click Board

Now add compass to your design using the new Compass click board from MikroElektronika to your design. This accessory board incorporates an ultra-compact LSM303DLHC e-compass module that showcases low power consumption and high performance. The module has a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. It also features 3 magnetic field channels and 3 acceleration channels. Compass click provides a 16-bit data output through I2C serial bus interface.

Designed to just plug directly into a MikroBUS socket after soldering the header pins, the module features two independent programmable interrupt generators meant for free-fall and motion detection. The IC interface transmits readings, which are processed, and used to determine the earth's magnetic north pole. Compass Click communicates with the target board MCU through the MikroBUS I2C (SDA, SCL), INT and RST lines.

It makes an ideal choice for a range of applications, including a compensated compass, position detection, map rotation, pedometer, display orientation, and many more. It is designed to support 3.3V power supply only.




Introduce fast and exceptional quality graphics even on 8-bit microcontrollers with little RAM and Flash using ConnectEVE. The board components include a FT800Q graphic controller and a 480x272 pixel 4.3" TFT colour display AT043B35 with LED backlight. Twelve components (widgets) supported by FT800Q chip, transparency support, anti-aliasing and other features will make your designs shine. Featuring 3-in-1 functionality including display, audio, and touch operations, the ConnectEVE board is primarily designed to be used as an additional display on MikroElektronika Easy development boards. The display is driven by a HX8257 display controller that delivers unparalleled graphic performance with each pixel displaying 262K different colours.

To provide input functionality, the TFT display is covered with a resistive touch panel. The ConnectEVE board has two headers (2x5 and 1x10) for simple connection with other development boards and peripheral devices. Furthermore, it has mounting holes to the corners for simple integration.



Connector Header 2-pin (2.54mm pitch) for Li-Poly Battery

Connector Header 2-pin (2.54mm pitch) for Li-Poly Battery



Counter Click Board

The Counter Click is an accessory board designed to keep the DC motor shafts in check. Featuring the LS7366R quadrature counter, Counter click board uses the MikroBUS SPI interface (CSK, MISO, MOSI), plus enable (CNT EN) and interrupt (LFLAG or DFLAG) pins for communication with the target board microcontroller. The 32-bit quadrature counter is to be used with a rotary encoder to quantify the speed and direction of rotation of DC motor shafts. It enables the user to calculate the number of rotations of a shaft precise when things get blur to the naked human eye. The rotary encoder on a DC motor outputs ENCA and ENCB signals which are out of phase to each other. For decoding the signal, the other end of these wires is connected to the pinout on the top of the board for interfacing with incremental encoders. In addition to ENCA and ENB, the pinout aboard the Counter click also an ENCI pin, which is a programmable index. The board is designed to operate using either a 3.3V or 5V power supply.

Counter click is an ideal choice for applications that include measurement of the direction and RPM of DC motor shafts.



Current 2 Click Board

Current 2 click is an accurate current sensing Click board™ suitable for a very accurate measurement of the current through the load. It utilizes the high-side current sensing approach, which has a few advantages over the low-side current sensing. Current 2 click is equipped with an integrated transimpedance amplifying circuit, designed specifically for low-power current sensing applications. Designed to be used with a common mode voltage up to 6V, this Click board™ is a perfect solution for the battery charging monitoring, various battery gauges, and other similar low voltage applications that require simple and reliable current monitoring.

It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.



Current Click Board

The MikroE Current Click is a complete electric current measurement solution that supports bandwidth up to 500 kHz. This add-on board includes a high-speed, voltage output INA196 current shunt monitor, a 12-bit resolution MCP3201 ADC, a low-dropout, micropower MAX6106 voltage reference, as well as two on-board screw terminals.

The package includes four shunts with different values: 0.05.