MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
Establish wireless communication between a microcontroller and a remote wireless device using the EasyWiFi Board. Designed to be compatible with most microcontroller architectures, the EasyWiFi board is an all-in-one wireless 2.4GHz 802.11b solution with high-speed voltage translators. The board carries an MRF24WB0MA Wi-Fi radio transceiver module with integrated PCB antenna, matching circuitry, and supports Wi-Fi with the free TCP/IP protocol stack. It supports low-power, low data-rate Wi-Fi communication and communicates through 4-wire SPI and UART interface. The connection may be established via a flat cable with Mikroe development board-compatible IDC10 connectors on its ends. The board also has UART and JTAG pin pads available for testing purposes. It supports WEP, WPA-PSK, and WPA2-PSK security. It is designed to operate using both 3.3V and 5V power.
EasyWiFi Board is an ideal choice for industrial controls, home automation, building automation, and consumer applications.
ECG 2 Click Board
Track the patterns of your beating heart with the ECG 2 Click Board. ECG 2 click contains ADS1194 16-bit delta-sigma analog-to-digital converters from Texas Instruments, a built-in programmable gain amplifier (PGA), an internal reference, and an on-board oscillator.
The click communicates with the target MCU over SPI and the following MikroBUS pins: PWM, AN and INT. ECG 2 click runs on 3.3V and 5V power supply
ECG 2 Click bundle
The ECG 2 Click Bundle (the click + cable + electrodes) has what you need to start recording your ECG.
Prototype your own health-tracking and fitness devices, find out how healthy your heart is or just make an LED blink in sync with your heart.
Single use adhesive ECG/EMG electrode (48 X 34mm) with stud adapter.
EEPROM 2 Click Board
The EEPROM 2 Click Board carries ST’s M95M02-DR DIP-8 socket EEPROM chip with 256 KB of memory. The chip has byte and page write speeds equal or less than 10 ms.
EEPROM 3 Click Board
The EEPROM 3 Click Board is a compact add-on board intended for designs that rely on I2C for writing, reading, and erasing. The board features Atmel
Expand development system capabilities by adding an 8K EEPROM memory accessory board to the device. The EEPROM Board comes with an integrated 24C08WP chip, which is a highly reliable, high-performance CMOS technology serial 8K EEPROM in DIP packaging. The 24C08WP EEPROM module works great for low-power, low-voltage applications. This additional board uses serial I2C communication to add 8K of EEPROM memory to the microcontroller. It uses a 2-wire serial interface that includes a bi-directional serial data bus synchronized by the clock. A female IDC10 connector is used to plug the EEPROM Board into a development system. Furthermore, the DIP switch enables the user to set which pins are used for SDA/SCL. The EEPROM Board has a power LED and address selection SMD jumpers.
With such features, this additional board makes an excellent choice for storing initialization and configuration data of the user device.
EEPROM Click Board
The EEPROM Click Board from MikroE is an add-on storage board that includes a 24C08WP serial EEPROM with 8 Kbits of memory. Driven by CMOS technology, this click board enables the user to add more 8 Kbit EEPROM memory to the device. An ideal choice for low power and low voltage applications, 24C08WP module is compatible with the I2C memory standard and uses a bi-directional data bus and serial clock. It is available in a DIP packaging. The DIP socket makes EEPROM easily replaceable. EEPROM click works well with both the 100 kHz I2C standard-mode and the 400 kHz I2C fast-mode. The board is designed to operate on 3.3V or 5V power supply, selectable by an SMD jumper. Another set of SMD jumpers that allow address selection are also available on the board. The green LED diode denotes the status of power supply.
The EEPROM click is an ideal selection for storing initialisation and configuration data of your device.
EERAM 3.3V Click Board
Add memory to your project with EERAM 3.3V Click Board. It carries the 47L16 EERAM, a 16Kbit SRAM with EEPROM Backup from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the MikroBUS™ line.