MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
LM35 Temperature Sensor TO-92
The LM35 is a precision integrated-circuit temperature sensors.
LoRa Click Board
The LoRa Click Board is based on Microchip's RN2483 fully certified LoRa Sub-GHz, 433/868 MHz European R&TTE Directive Assessed Radio Modem.
The click is designed to use either a 3.3V or a 5V power supply. It communicates with the target microcontroller over the MikroBus UART interface (TXD, RXD, CTS) with the addition of a Reset pin (RST).
LPG Click Board
The LPG Click Board is a highly sensitive liquified petroleum gas leakage sensing device. Users can easily add this accessory board to their design of LPG leakage equipment. LPG click features a powerful MQ-5 sensor for detecting LPG. It has also got two jumpers, a power indicator LED, a MikroBUS host socket and a calibration potentiometer. LPG click can precisely detect the LPG levels in the range of 200 to 10000ppm of concentrations.
The MQ-5 sensor features a gas sensing layer constructed of tin dioxide (SnO2) which is an inorganic compound. Since tin dioxide has lower conductivity in clean air, as the percentage of LPG increases in the environment the conductivity rises too. The potentiometer enables the user to adjust the load resistance of the sensor circuit so that LPG click may be calibrated for the targeted surroundings.
LPG click is great for use as a LPG checker for detecting LPG concentration in the air. It can be used in the devices like domestic gas leakage detectors, industrial combustible gas detectors and portable gas detectors.
LPS22HB Click Board
The LPS22HB Click Board is an easy solution for adding a digital barometer to your design. It carries the LPS22HB MEMS nano pressure sensor. The click is designed to run on a 3.3V power supply. LPS22HB click communicates with the target microcontroller over I2C or SPI interface.
LSM303AGR Click Board
The LSM303AGR Click Board measures acceleration and magnetic field characteristics. It carries the LSM303AGR 3D accelerometer and 3D magnetometer.
LSM303AGR Click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the MikroBUSline.
LSM6DSL Click Board
The LSM6DSL Click Board measures linear and angular velocity with six degrees of freedom. It carries the LSM6DSL high-performance 3-axis digital accelerometer and 3-axis digital gyroscope. The click is designed to run on a 3.3V power supply.
The LSM6DSL click communicates with the target microcontroller over SPI or I2C interface, with additional functionality provided by the INT pin on the MikroBUSline.
MAC Address Click Board
The MAC Address Click Board provides a unique node address for your application. It also has 1Kbit of writable EEPROM memory. MAC Address click carries the 24AA025E64 2K I2C Serial EEPROM with EUI-64node identity.
The click is designed to run on either 3.3V or 5V power supply. The MAC Address click communicates with the target microcontroller over I2C interface.
Magneto 2 Click Board
The Magneto 2 Click Board is a MikroBUSadd-on board with Melexis's MLX90316 monolithic rotary position sensor.
Sensing flux density with the IC surface of the MLX90316 allows the click to decode the absolute rotary (angular) position from 0 to 360 degrees.
Magneto Click Board
The Magneto Click Board is an accessory board that comes equipped with a contactless magnetic 360 degree angle position sensor chip termed as AS5048A. The operations of the sensing circuitry of this board are based upon the Hall Effect. Magneto can easily detect the presence of a nearby magnetic field in a 360 degree two-dimensional plane adjacent to the surface of the AS5048A chip. The angle measurements provided by the Magneto click can be precisely down to 0.05?? in 14-bit resolution, if an external MCU does the linearization and averaging tasks. The board