Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

Keylock Click Board

The Keylock Click Board carries a processed sealed key lock mechanism that can be set in three different positions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the MikroBUS™ line.

The click board™ comes with two keys and a protective cap for the mechanism.

MIKROE-2564

$24.43

Keypad 4x4 Board

The Keypad 4x4 Board features 16 push buttons arranged in 4x4 matrix to form standard alphanumeric keypad.

MIKROE-86

$9.85

Kinetis Clicker Board

The Kinetis Clicker is an amazingly compact starter development kit which brings click board connectivity an NXP's Kinetis ARM Cortex™-M4 microcontroller.

MIKROE-2330

$24.43

LCD Adapter Board

Connect a 2x16 LCD or 4x20 LCD display to any development board or prototype device using the simple and compact LCD Adapter Board. The board is connected to the development system through an IDC10 female header connector provided on the long flat cable. The 1x16 male connector on the additional board allows for connection with an LCD display. These header connectors are compatible with all MikroElektronika development boards. Also, LCD Adapter Board features a potentiometer that allows the user to control the display backlight.

MIKROE-131

$17.36

LCD mini Click Board

The LCD mini Clicxk Board displays 2x16 monochrome characters on an LMB162XFW LCD display. It features the MCP23S17 port expander and the MCP4161 digital potentiometer, both from Microchip.

LCD mini click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface and the following pins on the MikroBUSline: PWM, INT, RST, AN.

MIKROE-2453

$18.56

LCD mini display

The LMB162XFW is a 2x16 LCD display with a deep blue display colour, and light yellow green display data. The outline dimensions are 53.0 x 20.0 x 9.1 max.

MIKROE-2518

$11.72

LDC1000 Click Board

Equip your design with the first inductance-to-digital converter IC by using the LDC1000 click. The board also features a detachable PCB sensor, which comprises of a 36-turn PCB coil and a 100pF 1% NPO capacitor. LDC1000 click also allows the user to experiment with different sensors by breaking off the original and soldering it to the on-board INA and INB pins.

The on-board INA and INB pins enable the user to replace the offered detachable sensor and solder its own. LDC1000 click communicates via MikroBUS SPI (CS, SCK, MISO, MOSI) and INT lines with the target board MCU. It supports either a 3.3V or 5V power supply.

In short range applications, the LDC1000 features a sub-micron resolution, which makes LDC1000 click an ideal choice for very precise short range measurements of the position, motion or composition of conductive targets. Based on a contactless, magnet-free inductive sensing technology, LDC1000 click offers steadfast performance even in hostile environments like, in the presence of dust, dirt, oil, moisture, etc.

MIKROE-1583

$34.20

LED driver 2 Click Board

The LED Driver 2 Click Board carries the MCP1643 - LED constant current regulator, made by Microchip. It is a compact, high-efficiency, fixed frequency, synchronous step-up converter, optimised to drive one LED with the constant current. It can be powered by a two-cell alkaline/NiMH/NiCd battery (2.4V), or via the mikroBUS™ power supply pins. LED Driver 2 click also features 3W high power LED by QT-Brightek. This LED can be dimmed by applying the variable duty cycle PWM signal to the EN pin of the MCP1643 regulator, through the PWM pin of the mikroBUS™.


Thanks to its relatively high constant current driving capability and the overvoltage protection on the output, this integrated circuit is perfectly suited for high brightness/power LED applications: portable LED lighting products, LED Flashlight and Head Lamps, Rechargeable Flashlights, General LED constant current applications and so on.

MIKROE-2807

$14.65

LED Driver 3 Click Board

The LED Driver 3 Click Board is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C interface. It comes with an RGB LED onboard, and is capable of displaying a palette of 32768 colors. It features an integrated circuit with three independent LED driver sections and a programmable gradual dimming control, which gives a smooth dimming effect. Heat dissipation is taken to the minimum, due to a fact that the used driver IC works with up to 94% efficiency.

MIKROE-2950

$14.65

LED Driver 4 Click Board

The LED Driver 4 Click Board™ is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs. The driver has the ability to dim the connected LED array, without producing any noise on the output. The Click board™ is capable of driving a LED array with up to 26V, providing a constant current to the LED segments. The LED segments are connected in series between the output terminals, which results in an even current distribution, thus providing a uniform brightness of each LED. A built-in soft-start function prevents large inrush current. Output open LED circuit, thermal, and undervoltage protection, provide a reliable operation.


MIKROE-3037

$15.79

LED Driver Click Board

The LED Driver Click Board is based on the MCP1662 high-voltage step-up voltage driver from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over PWM pin on the MikroBUS™ line.

MIKROE-2676

$14.65

LED Flash 2 Click Board

The LED Flash 2 Click Board is a powerful flash/torch click, featuring the MIC2870 from Microchip, a high-efficiency flash LED driver, optimized for driving one or two high-brightness camera flash LEDs. The MIC2870 IC can drive one high brightness LED up to 1.5A or two high brightness LEDs, up to 750mA each. Two high brightness LEDs are already mounted on the Led Flash 2 click, so the click board is ready to be used right away.

MIKROE-2830

$18.56