The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

MINI-M4 for Tiva C Series

MINI-M4 for Tiva C Series

MINI-M4 for Tiva C Series

MIKROE-1595

$35.21

MMC Ready Board

MMC Ready Board

Create MMC/SD based mass storage devices based on PIC device with ease using the MMC Ready Board. Designed to be compatible with MultiMedia (MMC) and Secure Digital (SD) memory cards, this full-featured development tool features an on-board 28-pin microcontroller PIC18F252. This highly efficient device is a great choice for managing various arduous embedded mass-storage applications. Using a 2x5 (IDC10) connector, the microcontroller is programmed to enable connection with the PICFlash external programmer. The MMC Ready Board includes a voltage regulator, which ensures no need to connect additional power supply circuits. It can also be connected to external electronic or other devices through 13-pin 2.54 mm pin header pads. It is designed to operate using a 5V DC power supply voltage.

With these features, MMC Ready Board is an ideal choice for fast data acquisition device. It has on-board microcontroller that enable use as an independent device.

MIKROE-545

$35.21

MMC/SD Board

MMC/SD Board

The MMC/SD Board is a great option to add data storage functionality to your device. The add-on storage board comes with an MMC/SD card slot for MMC or SD cards. The MMC (MultiMedia Card) cards are superseded by SD (Secure Digital) cards, but are still widely used in a wide range of portable devices that support SD cards. The MMC/SD Board supports both types of cards, which are most commonly used as memory data storage in devices like cameras, digital audio players, cellular phones, etc. The user can also use the device carrying this MMC/SD board with all modern computers as they come with an MMC/SD slot. This storage board provides data read/write between a microcontroller and MMC/SD card. It uses a standard Serial Peripheral Interface (SPI) for fast data transfer. It can also be used for fast data acquisition or storing other data files, including images, music, text, videos, etc. where fast mass storage is required. The MMC/SD Board is designed to support use of 3.3V and 5V power supply.

The DIP switches on the board enable user to set which pins on the 2?

MIKROE-3

$26.19

MMCX-SMA Cable

MMCX-SMA Cable

MMCX-SMA Cable

MIKROE-289

$14.29

MOTION Click Board

MOTION Click Board

Give your design the infrared motion detector functionality with the Motion Click Board. Designed to respond only to living bodies, this click board features PIR500B, a pyroelectric infrared radial sensor that generates a voltage when exposed to infrared light. It is connected to a BISS0001 motion sensor controller IC processes the signal and sends an interrupt to the host MCU via the mikroBUS INT (out) line. MOTION click also includes an onboard potentiometer that enable the user to adjust the detection range (up to 4 metres). Using the mikroBUS RST pin of the host microcontroller, the user can turn the potentiometer on/off by sending signals. The photo resistor aboard MOTION click that allows the user to set up the sensor to work only when it's dark. The night-only mode can be activated by using a jumper (zero-ohm resistor) below the photo resistor on the left side of the board. MOTION click is designed to support only a 3.3V power supply

It is commonly used in human motion detector applications like burglar alarms, but the user can apply this concept to make lights switch ON as soon as someone enters the room, or restricting persons from entering a certain area.

MIKROE-1589

$19.34

Motion Sensor Board

Motion Sensor Board

Create interesting and compact devices to use in work and home using the Motion Sensor Board. This add-on board includes a passive infrared type movement sensor AMN11112, which detects changes in infrared spectrum when a person or object moves. This motion sensor features quad-type pyroelectric element, which makes it an ideal choice for small-movement detection applications. The sensor is protected with a plastic cap, which includes miniature lenses in order to boost sensor precision. In case some changes are detected in the infrared rays, the microcontroller

MIKROE-237

$41.06

MP3 Click Board

MP3 Click Board

The MP3 Click Board is an easy and compact accessory board that incorporates a versatile VS1053 stereo MP3 decoder chip. Designed to add MP3 feature, the VS1053 IC allows the user to decode all the commonly used formats (including the new AAC format). The formats include Ogg vorbis, MP3, MP1, MP2, MPEG4, WMA, FLAC, WAW, and MIDI. It also allows encoding of three different formats (Ogg vorbis, IMA ADPCM, 16-bit PCM) from microphone line in mono or stereo. MP3 click utilize the industry-standard SPI line for communication with the target board microcontroller. This click board also includes stereo headphone and microphone audio connectors. It is designed to use a 3.3V power supply only.

MP3 click is an easy-to-use, powerful workhorse for audio playback and recording applications, including MP3 players, audio signalization devices, voice recorders, and many more.

MIKROE-946

$28.17

MPU 9DOF Click Board

MPU 9DOF Click Board

The MPU 9DOF Click Board from mikroE is a measurement add-on board that includes MPU-9150 motion tracking mikroBUS module. Known to be the world

MIKROE-1719

$48.10

MPU IMU Click Board

MPU IMU Click Board

MPU IMU click is a high-precision measurement add-on board designed to add motion tracking functionality to the design. With a tiny footprint, MPU IMU click features an InvenSense

MIKROE-1577

$45.13

Nano GPS Click Board

Nano GPS Click Board

Designed for outstanding performance and sensitivity, Nano GPS click features the OriginGPS

MIKROE-1912

$51.08

NFC Tag Click Board

NFC Tag Click Board

The NFC Tag Click Board is an accessory add-on board from MikroElektronika carrying an M24SR64 NFC/RFID tag IC with a dual interface. It is embedded with a highly-reliable 8KB EEPROM memory. The user can operate NFC Tag click in three different ways: via I2C interface, with a 13.56MHz RFID reader, and with an NFC-enabled smartphone, tablet, or similar device. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. The click board communicates with the target board microcontroller using mikroBUS I2C (SCL, SDA), INT and RST lines.

The NFC (Near Field Communications) Tag click features a PCB antenna that operates at a very close range (around 3cm), which makes it quiet secure as for developing mobile payment systems (some credit cards, Apple Pay, Google Wallet, etc.), or any short-range wireless data exchange. NFC Tag click is designed to use a 3.3V power supply only.

MIKROE-1726

$18.35

Noise Click Board

Noise Click Board

Noise Click Board

MIKROE-2371

$35.21