The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

I2C Isolator 2 Click Board

The I2C Isolator 2 Click Board provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply.

The click communicates with the target microcontroller over an I2C interface with additional functionality provided by the PWM pin on the MikroBUSline.

MIKROE-2609

£28.80

I2C Isolator Click Board

The I2C Isolator click carries ISO1540, a low-power, bidirectional isolator compatible with I2C interfaces. On the board, the Texas Instruments chip is connected to two sets of I2C pins, one on the mikroBUS connector (SDA, SCL), the other on the upper edge of the board (SCL2, SDL2).

MIKROE-1878

£21.60

iButton™ Click Board

The iButton click - is an iButton probe Click board. The iButton is a technology based on the one-wire communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board, it establishes the communication with the host MCU, via the one-wire interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.


.

MIKROE-3045

£42.00

iButton™ Serial Number

DS1990A is a unique serial number identification iButton™. The iButton is a technology based on the one-wire communication protocol, and a chip packed in a robust stainless steel casing. This button shaped device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board™, it establishes the communication with the host MCU, via the one-wire interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.

MIKROE-3047

£4.80

ICD2 Connector Board

Easily connect the ICD2/ICD3 or Real ICE programmers/debuggers to the prototyping device using the ICD2 Connector Board. It is offered with a loose 1x6 header connector that user can solder, when required. The single-row header and the RJ12 connector are wired one to one. This RJ12-type connector provides easy prototyping and considered suitable for use with solderless breadboards. The RJ12 socket is wired to six pins to provide access to PGD, PGC and /MCLR lines along with VCC and GND power connections. Featuring a compact design, ICD2 Connector Board works as a cost-effective solution to solve your connecting problems. The board is designed to perfectly fit into standard prototyping boards.

MIKROE-315

£4.80

Illuminance Click Board

The Illuminance Click Board from MikroE is a light sensor designed for better detection of ambient lighting over conventional light sensors that are too sensitive to infrared light. The board features an on-board TSL2561, a light-to-digital converter, which transforms light intensity to a digital signal output. The TSL2561 sensor uses two separate photodiodes: One is sensitive to the full-spectrum of light, the other to infrared light only. Using a formula, the user gets a sensor reading then approximates light response of the human eye. Illuminance click communicates with your target microcontroller via MikroBUS I2C lines: SCL (clock) and SDA (data). The zero-ohm J1 jumper allows the user to select between three available I2C address.

The Illuminance Click finds application in auto-brightness regulators on OLED or LCD displays, or any other kind of automatic ambient light regulation. It is designed to use a 3.3V power supply only.

MIKROE-1688

£19.20

Intel Joule Click Board SHIELD

The Intel? Joule Click SHIELD is an extension for Intel? Joule Expansion Board. This click shield allows you to add more than 355 click boards to your project. Add displays, WiFi, ZigBee or Bluetooth transceivers, Ethernet modules, sensors, MP3 codec circuit and other features to your prototype with ease.

MIKROE-2546

£22.80

Intel Joule Click Board SHIELD +

The Intel? Joule click SHIELD+ is an extension for Intel? Joule Expansion Board with four mikroBUS sockets. This click shield allows you to add more than 280 click boards to your project. Add displays, WiFi, ZigBee or Bluetooth transceivers, Ethernet modules, sensors, MP3 codec circuit and other features to your prototype with ease.

MIKROE-2582

£25.20

IPEX-SMA cable

IPEX-SMA cable. Designed for use with the CCRF3 Click Board.

MIKROE-274

£9.48

iqRF 2 Click Board

The IQRF 2 Click Board carries the DCTR-72DAT RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply.

It communicates with the target microcontroller over SPI or UART interface, with additional functionality provided by the following pins on the MikroBUSline: AN, PWM.

MIKROE-2587

£58.80

iqRF Click Board

The IQRF Click Board is based on the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional functionality provided by the following pins on the MikroBUS line: AN, RST, PWM, INT.

MIKROE-2586

£51.60

IR Beacon Click Board

The IR Beacon Click Board is a mikroBUS add-on board with an array of nine high speed infrared emitting diodes. It functions as a beacon device, transmitting infrared rays in a wide angle, which can be detected by nearby infrared receivers (such as the one on IR click). Each of the nine VSMB2948SL diodes have a transparent plastic package that serve as tiny lenses.


.

MIKROE-1939

£25.20