The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

LCD Mono Click Board™

LCD Mono Click Board™

MIKROE-3789

£78.00

LDC1000 Click Board™

Equip your design with the first inductance-to-digital converter IC by using the LDC1000 Click Board™. The board also features a detachable PCB sensor, which comprises of a 36-turn PCB coil and a 100pF 1% NPO capacitor. LDC1000 Click Board™ also allows the user to experiment with different sensors by breaking off the original and soldering it to the on-board INA and INB pins.

The on-board INA and INB pins enable the user to replace the offered detachable sensor and solder its own. LDC1000 Click Board™ communicates via MikroBUS SPI (CS, SCK, MISO, MOSI) and INT lines with the target board MCU. It supports either a 3.3V or 5V power supply.
.

In short range applications, the LDC1000 features a sub-micron resolution, which makes LDC1000 Click Board™ an ideal choice for very precise short range measurements of the position, motion or composition of conductive targets. Based on a contactless, magnet-free inductive sensing technology, LDC1000 Click Board™ offers steadfast performance even in hostile environments like, in the presence of dust, dirt, oil, moisture, etc.

MIKROE-1583

£42.00

LDC1101 Click Board™

LDC1101 Click Board™ is an inductance-to-digital converter Click Board™. It is designed for a range of different applications, based on inductive measurements. You can use it to detect the position, rotation, or motion of an object. LDC1101 carries the LDC1101, the integrated, high-resolution, high-speed, inductance-to-digital converter. The converter allows both the inductance and the impedance to be measured. The fast impedance + inductance (RP+L) mode offers separate 16-bit readings for both parameters, while the high-resolution inductance (LHR) mode offers a single reading with a resolution of 24 bits.

It comes in the package which also includes the mikroSDK software and a library with all the functions. The Click Board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

MIKROE-3240

£34.80

LED Driver 2 Click Board™

The LED Driver 2 Click Board™ carries the MCP1643 - LED constant current regulator, made by Microchip. It is a compact, high-efficiency, fixed frequency, synchronous step-up converter, optimised to drive one LED with the constant current. It can be powered by a two-cell alkaline/NiMH/NiCd battery (2.4V), or via the mikroBUS power supply pins. LED Driver 2 Click Board™ also features 3W high power LED by QT-Brightek. This LED can be dimmed by applying the variable duty cycle PWM signal to the EN pin of the MCP1643 regulator, through the PWM pin of the mikroBUS.


Thanks to its relatively high constant current driving capability and the over-voltage protection on the output, this integrated circuit is perfectly suited for high brightness/power LED applications: portable LED lighting products, LED Flashlight and Head Lamps, Rechargeable Flashlights, General LED constant current applications and so on.

MIKROE-2807

£18.00

LED Driver 3 Click Board™

The LED Driver 3 Click Board™ is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C interface. It comes with an RGB LED on-board, and is capable of displaying a palette of 32768 colours. It features an integrated circuit with three independent LED driver sections and a programmable gradual dimming control, which gives a smooth dimming effect. Heat dissipation is taken to the minimum, due to a fact that the used driver IC works with up to 94% efficiency.

MIKROE-2950

£18.00

LED Driver 4 Click Board™

The LED Driver 4 Click Board™ is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs. The driver can dim the connected LED array, without producing any noise on the output. The Click Board™ is capable of driving a LED array with up to 26V, providing a constant current to the LED segments.

The LED segments are connected in series between the output terminals. This results in even current distribution, thus providing a uniform brightness of each LED. A built-in soft-start function prevents large inrush current. Output open LED circuit, thermal, and under-voltage protection, provide reliable operation.

MIKROE-3037

£18.00

LED Driver 5 Click Board™

LED Driver 5 Click Board™ is a Click Board™ capable of driving an array of high-power LEDs with constant current, up to 1.5A. This Click Board™ features the TPS54200, a highly integrated LED driver IC, with many useful features. It consists of a synchronous, fixed-frequency buck converter which operates at 600kHz, providing an excellent size/efficiency ratio. LED Driver 5 Click Board™ can use both analog and PWM control signal for dimming the connected LED array.

It comes in the package which also includes the mikroSDK software and a library with all the functions. The Click Board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

MIKROE-3297

£18.00

LED Driver 6 Click Board™

The LED driver 6 Click Board™ is a high brightness LED or LED strip driver, designed to be used in tunable Smart Connected Lighting (SCL) applications. It is based on the AL1781, a single-channel PWM dimmable linear LED driver. By utilizing a high-frequency E-flicker free technology with Deep Dimming capability, it can be used in single-channel tunable white SCL applications. The AL1781 IC features the Adaptive Thermal Management scheme, reducing the power dissipation. It also integrates an abundance of protection features for increased reliability: under-voltage, open or short circuit at the output, and thermal protection.

MIKROE-3400

£18.00

LED Driver 7 Click Board™

The LED Driver 7 Click board™ is equipped with the LTC3490, single cell 350mA LED driver from Analog Devices. The LED Driver 7 click can be used for portable lighting, rechargeable flashlights, system calibrations, electronics level settings, automotive electronics adjustments, mechanical trimmers and potentiometer replacements.The LED drive current can be reduced by changing the voltage on the CTRL/SHDN pin with AD5171, a 64-position OTP digital potentiometer from Analog Devices (ADI).

MIKROE-3917

£27.60

LED Driver Click Board™

The LED Driver Click Board™ is based on the MCP1662 high-voltage step-up voltage driver from Microchip. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over PWM pin on the MikroBUS line.

MIKROE-2676

£18.00

LED Flash 2 Click Board™

The LED Flash 2 Click Board™ is a powerful flash/torch Click Board™, featuring the MIC2870 from Microchip, a high-efficiency flash LED driver, optimised for driving one or two high-brightness camera flash LEDs. The MIC2870 IC can drive one high brightness LED up to 1.5A or two high brightness LEDs, up to 750mA each. Two high brightness LEDs are already mounted on the Led Flash 2 Click Board™, so the Click Board™ is ready to be used right away.

MIKROE-2830

£22.80

LED Flash Click Board™

The LED Flash Click Board™ functions as a high power LED photographic flash lamp, and carries the CAT3224 flash LED driver. The Click Board™ is designed to run on a 5V power supply. It communicates with the target microcontroller over the following pins on the MikroBUSline: AN, RST, PWM, and INT.

MIKROE-2479

£40.80