MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
Port Expander Board
Introduce easy I/O port expansion using a standard serial interface using the Port Expander Board. The board features an MCP23S17 16-bit I/O expander with serial interface. The SPI clock has a speed up to 10 MHz, which makes it highly suitable for higher throughput applications. The Interrupt-on-change feature can be considered as 8 separate external interrupts mapped on to the same interrupt vector. The Port Expander Board features jumpers that enable the user to determine the port expander
Add potentiometer functionality to the design using the Potentiometer Board. Designed for testing analog inputs of a microcontroller on a development system, the Potentiometer Board is equipped with eight 10K potentiometers with related jumpers that allows user to enable/disable each one individually. It works as an effective and low-cost solution for testing analog inputs on the prototype board. The on-board potentiometers allow for adjusting voltage levels on the host microcontroller
Pressure 2 Click Board
The Pressure 2 Click Board carries MS5803, a high resolution MEMS pressure sensor that is both precise and robust. Its measurement range is from 0 to 14 bars...
Pressure Click Board
Introducing a pressure measurement solution to your design with the MikroE Pressure Click Board! This click board includes an ultra-compact absolute piezoresistive pressure sensor
PROTO Click Board
The PROTO Click Board from MikroE is a cheap and effective add-on board that allows the user to create a custom click board. The board features 10x11 general purpose prototyping area along with additional power pads, which enable the users to assemble their own electronics and create a conventional click board. Furthermore, the user can add sensors, drivers, and passive components to add additional functionality to meet user
PROTO Connect 2 Board
Introduce a simple and convenient way of connecting multiple wires from power supply, communication, analog and/or GPIO lines to a breakout board using the PROTO Connect Board. This adapter board includes two connection pads in standard 100mil spacing and two screw terminals to meet the device requirements. It also has male header pins that can be soldered. This compact-sized and affordable board makes for a great choice for prototyping.
PROTO Connect Board
Introduce a simple and convenient way of connecting eight wires from power supply, communication, analog and/or GPIO lines to a breakout board using the PROTO Connect Board. This adapter board includes eight connection pads in standard 100mil spacing and eight screw terminals to meet the device requirements. It also has male header pins that can be soldered. This compact-sized board makes for a great choice for prototyping.
Proximity 2 Click Board
The Proximity 2 Click Board is an accessory board featured with a tiny footprint MAX44000 IC. The chip features an integrated ambient light sensor as well as proximity sensor. It comprises of a group of photodiodes that work by converting light into current. The internal circuitry then converts the resulting current into a digital value. Proximity 2 click has an on-board ambient light sensor with a dynamic range of 0.03 to 65.535 lux. The IR proximity detector, with a sensing range of approximately 12cm, is matched with an integrated IR LED driver. Proximity 2 click communicates to the target board microcontroller via MikroBUS I2C (SCL, SDA), and INT lines. All readings are available on an I2C communication bus. It also has a programmable interrupt pin. Proximity 2 click supports a 3.3V power supply only.
Due to its small size, it is an ideal choice for industrial sensors, presence detection, tablet PC applications, and smartphones.
Proximity 3 Click Board
The Proximity 3 Click Board is an intelligent proximity and light sensing device, which features the VCNL4200sensor from Vishay - high sensitivity long distance proximity sensor (PS), an ambient light sensor (ALS) and 940 nm IRED, all in one small package. With its smart sensing and light conditioning properties, the Proximity 3 click can be used in a wide range of applications: adjusting the brightness of the TFT screen depending on ambient light, turning off the TFT background light if it is covered, very accurate lux meters, reliable security sensors and so on.
Proximity Click Board
The Proximity Click Board is a compact accessory board that allows user to introduce proximity sensor functionality to the device. It features a surface mount, fully integrated proximity and ambient light sensor, VCNL4010.
PS/2 Click Board
Introduce keyboard and mouse connectivity to the device with this cost-effective solution - the PS/2 Click Board.
This add-on board includes a standard 6-pin Mini-DIN PS/2 connector, a MikroBUS pinout, and a power indicator LED. PS/2 click features a PS/2 port for connecting a keyboard or mouse to the target device. Although, superseded by USB, it is still used as an alternative to the USB connector. It is well-suited for connecting vintage keyboards and mice or certain high-end keyboards for gamers due to its full N-key rollover functionality. PS/2 click communicates with your target board through MikroBUS RST (data) and CS (clock) pins. It is designed to use a 5V power supply only.