The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

MCU CARD for Tiva TM4C1299NCZAD

MCU Card is a standardised add-on for the Fusion v8 development board, which allows very simple installation and replacement of the microcontroller unit (MCU) via the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.

This MCU card is fitted with a TI Tiva TM4C1299NCZAD.

MIKROE-3494

£114.00

MCU CARD for Tiva TM4C129ENCZAD

MCU Card is a standardised add-on for the Fusion v8 development board, which allows very simple installation and replacement of the microcontroller unit (MCU) via the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.

This MCU card is fitted with an TI Tiva TM4C129ENCZAD.

MIKROE-3495

£108.00

MCU CARD for Tiva TM4C129LNCZAD

MCU Card is a standardised add-on for the Fusion v8 development board, which allows very simple installation and replacement of the microcontroller unit (MCU) via the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.

This MCU card is fitted with a TI Tiva TM4C129LNCZAD.

MIKROE-3496

£114.00

MCU CARD for Tiva TM4C129XKCZAD

MCU Card is a standardised add-on for the Fusion v8 development board, which allows very simple installation and replacement of the microcontroller unit (MCU) via the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.

This MCU card is fitted with an TI Tiva TM4C129XKCZAD.

MIKROE-3497

£108.00

MCU CARD for Tiva TM4C129XNCZAD

MCU Card is a standardised add-on for the Fusion v8 development board, which allows very simple installation and replacement of the microcontroller unit (MCU) via the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.

This MCU card is fitted with a TI Tiva TM4C129XNCZAD.

MIKROE-3491

£84.00

MCU card with dsPIC30F6014A Microcontroller

MCU card with dsPIC30F6014A Microcontroller.

MIKROE-24

£28.98

MCU card with PIC18F8520 Microcontroller

MCU card with PIC18F8520 microcontroller.

Ideal for adding a PIC18F8520 to your project without using surface mount tools.

MIKROE-17

£22.80

MCU card with PIC18F8722 Microcontroller

MCU card with PIC18F8722 Microcontrollerr.

Ideal for adding a PIC18F8722 to your project without using surface mount tools.

MIKROE-18

£27.60

METHANE Click Board

The Methane Click Board makes it simple for the user to add a highly sensitive methane (CH4) sensor to his design. This add-on board comes equipped with an MQ-4 sensor for measuring methane, two jumpers and a power indicator LED. It has also got a calibration potentiometer and a MikroBUS host socket. The range in which Methane click can precisely detect the methane levels is from 200 to 10000ppm of concentrations. The MQ-4 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean air. As the percentage of methane increases in the environment, the conductivity rises too. The potentiometer enables the user to adjust the load resistance of the sensor circuit so that methane click may be calibrated for the intended surroundings. As the concentration of the target gas changes, the resistance of the sensor component also gets changed.

Methane click finds its application in designing of gas leakage equipment. Being suitable for detecting methane concentration, Methane click can be used in the devices like domestic gas leakage detectors, industrial combustible gas detectors and portable gas detectors.

MIKROE-1628

£18.00

Mic Click Board

The Mic Click Board is based on the SPQ0410HR5H-B surface mount silicon microphone with maximum RF protection.

The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the AN pin on the MikroBUSline.

MIKROE-2563

£10.80

MIC23099 Click Board

The MIC23099 Click Board carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The click is designed to run on a 3.3V power supply.

It communicates with the target microcontroller over the following pins on the mikroBUS line: CS, INT.

MIKROE-2765

£34.80

MIC24045 Click Board

The MIC24045 Click Board is based on the MIC24045 I2C-programmable, high-efficiency, wide input range, 5A synchronous step-down regulator from Microchip.

The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface with additional functionality provided by the following pins on the MikroBUSline: RST, INT.

MIKROE-2574

£15.60