MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
ADC Click Board
The ADC Click Board carries the MCP3204 12-bit Analog-to-Digital converter. The click is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.>
ADC PROTO Board
The ADC PROTO Board is used to convert analog voltage signals into digital voltage signals in 12-bit resolution. The board includes a MCP3204 12-bit Analog-to-Digital Converter (ADC) that combines low power consumption and high performance into a small package. Featuring a successive approximation register (SAR) architecture, the MCP3204 module uses an industry-standard SPI serial interface to send the converted voltage signal to the host microcontroller. Furthermore, it features up to 100K samples per second and four single-ended input channels. The ADC PROTO Board is small in size and comes equipped with screw terminals to facilitate easy connections. It is designed to operate using a 5V power supply only. When using it with 3.3V systems, it is advisable to use voltage translators on communication lines.
The ADC PROTO Board is an ideal choice for a variety of applications, which include instrumentation, industrial PCs, motor control, robotics, data acquisition, measurement, industrial automation, smart sensors, multi-channel data loggers, and so on.
ADC2 Click Board
If your design requires higher accuracy measurement than what a 12-bit Analog-to-Digital Converter (ADC) could provide, then considering ADC 2 click would prove to be an ideal choice. ADC 2 click incorporates the MCP3551 IC
ADC3 Click Board
Introduce a fine balance of precision and speed into your design with the ADC3 click. Featuring Microchip
Air Quality 2 Click Board
The Air Quality 2 Click Board carries the iAQ-Core Indoor Air Quality sensor that measures VOC levels and provides CO2 equivalent and TVOC equivalent predictions.
The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over I2C.
Air Quality Click Board
The Air Quality Click Board features MQ-135 gas sensor in its design for measuring the air quality in apartments, homes and offices. This add-on board helps the users in detecting poisonous gases like ammonia (NH3), nitrogen oxides (NOx), benzene, CO2, smoke and others that harm the air quality, and pollute it. Air quality click is equipped with a calibration potentiometer and a power indicator LED. It also has got a MikroBUS host socket and two jumpers. The MQ-135 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean air.
As the level of pollution increases in the air, the conductivity rises too. User can calibrate Air quality click for the environment by adjusting the load resistance of the sensor circuit. As the concentration of the target air changes, the resistance of the sensor component also gets changed.
Alcohol Click Board
Add a high-sensitivity alcohol gas sensor to your design with the addition of Alcohol click. The board incorporates a MQ-3 high-sensitivity alcohol sensor to detect alcohol concentration. Made of an inorganic compound called Tin dioxide (SnO2), the gas sensing layer on the MQ-3 sensor unit has lower conductivity in clean air. However, the sensitivity rises as the levels of alcohol gas rise.
Alcohol click features a small potentiometer for calibration that enables the user to set its own scale and adjust the load resistance of the sensor circuit. Using the AN (OUT) MikroBUS line, Alcohol click communicates with the target board. This board is designed to use 5V power supply only.
It offers very good sensitivity and fast response to alcohol gases, and is designed to detect presence of alcohol in concentrations from 0.04 to 4mg/l. It makes an ideal choice for portable alcohol detector and breathalysers for estimating BAC (blood alcohol content).
AlphaNum R Click Board
Embed your design with a two-digit red 14-segment alphanumeric display using the AlphaNum R click. The click board features two TLC5926 16-bit constant-current LED sink drivers. It contains 16-bit shift register and data latches, which convert serial input data into parallel output format. It has a dual-character LED 14-segment display (also known as a starburst display) with two additional segments for decimal points or periods.
Designed for displaying both letters and numbers, it provides clear, legible LED display. The R in the name of this click stands for Red. AlphaNum R click communicates with the target board via MikroBUS RST, CS, SCK, MISO, MOSI, PWM and INT pins (marked here as LE2, LE1, CLK, DOUT, DIN, NUMSEL and NUMSEL# respectively). It is designed to support either a 3.3V or 5V power supply, selectable through solder jumper.
Altitude Click Board
The Altitude Click Board from MikroE is an accessory board that enables the user to precisely measure altitude with 30cm resolution. The board employs a compact MPL3115A2 piezoresistive absolute pressure sensor that works with an embedded high-resolution 24-bit ADC to provide accurate pressure (Pascals)/altitude (metres) and temperature (??C) measurement. It features a wide operating range of 20 kPa to 110 kPa absolute pressure
Ambient 2 Click Board
The Ambient 2 Click Board carries TI’s OPT3001 Ambient Light sensor. It’s a small (2mm x 2mm) single-chip lux meter that measures only the visible part of the light spectrum from any kind of source (mimicking the way humans see light).
Ambient Click Board
The Ambient Click Board is based on the Melexis MLX75305 IC. It’s a CMOS integrated optical sensor that consists of a photodiode, a transimpedance amplifier, and an output transistor.