Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

OBD-II to DB9 cable

The OBD II to DB9 cable enables you to connect with your car’s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II click.

The overall length of the cable is five feet (152cm).

MIKROE-2838

$11.72

OBDII Click Board

The OBDII Click Board offers a unique opportunity to tap inside the car diagnostic systems. It features the STN1110 Multiprotocol OBD to UART Interface, developed by the ScanTool technologies. This click can be used for the communication with the Electronic Control Unit (ECU) of a vehicle, via several different OBD II diagnostic protocols such as CAN, K LINE, L LINE and J1850. The STN1110 IC is used to process requests sent by the MCU via the UART interface and return back the responses from the ECU network nodes.

MIKROE-2452

$46.79

OLED B Click Board

The OLED B Click Board is a display board with a white monochrome passive-matrix OLED display. This bright and clear 96x39 pixel display is designed to be viewable from wide angles. Controlled by SSD1306 controller, OLED B click offers a range of functionalities, including horizontal and vertical scrolling, contrast control, normal or inverse image display and more. The click board uses SPI or I2C MikroBUS lines to communicate with the target board microcontroller. The interface outputs can be chosen by resoldering three jumpers to the appropriate position. In spite of a sharp, high-contrast display, OLED B click operates on low power consumption. It is an ideal choice for displaying lines of text or icons. This module uses a 3.3V power supply only.

MIKROE-1650

$23.45

OLED C Click Board

Now introduce a vivid, high-contrast and sharp full-colour display to your design with the OLED C click. The board incorporates a 96?

MIKROE-1585

$28.33

OLED Switch Click Board

OLED Switch Click Board

MIKROE-2449

$96.72

OLED W Click Board

The OLED W Click Board is a display board with a white monochrome passive-matrix OLED display. This bright and clear 96x39 pixel display is designed to be viewable from wide angles. Controlled by SSD1306 controller, OLED W click offers a range of functionalities, including horizontal and vertical scrolling, contrast control, normal or inverse image display and more. The click board uses SPI or I2C MikroBUS lines to communicate with the target board microcontroller. The interface outputs can be chosen by resoldering three jumpers to the appropriate position. In spite of a sharp, high-contrast display, OLED W click operates on low power consumption. It is an ideal choice for displaying lines of text or icons. This module uses a 3.3V power supply only.

MIKROE-1649

$23.45

OOK RX Click Board

The OOK RX Click Board is a wireless receiver that operates at the frequency of 433MHz (sub-GHz). This device allows realization of a simple, low-speed wireless ad hoc communication network between a receiver and compatible transmitter. This device features an ASK/OOK demodulator, analog RSSI output, and integrated squelch capabilities.

MIKROE-2902

$18.56

OOK TX Click Board

The OOK TX Click Board is a simple wireless transmitter that operates at the frequency of 433MHz (sub-GHz). This device allows realization of a simple, low-speed wireless ad-hoc communication network between a transmitter and compatible receiver, such as the OOK RX click. This device features a programmable transmit power in 1dB steps, On-Off Keying (OOK) modulation with power ramp-up control, and it complies with US (FCC) and Canada (IC) standards.

MIKROE-2903

$18.56

Opto 2 Click Board

The Opto 2 Cliank Board is an optical isolator used to provide an optical galvanic isolation of sensitive lines. The used optoisolation elements require very low input current to be driven, down to 1.3mA (min). The speed of the internal optocoupler elements of the Opto click 2 allows it to work with the signals up to 20MHz. The Opto click 2 can be used to provide a galvanic isolation of the MCU pins, allowing driving by external components, while protecting it from surges up to 5kV on the driver side.

MIKROE-3015

$26.30

Opto Click Board

Introduce electrical isolation between inputs and outputs to the device using the OPTO Click Board. The board has two DIP VO2630 dual-channel optocoupler modules that enable high speed (10 MBit/s) data transfer between its input and output with galvanic isolation. The DIP8 sockets allow for easily replacement of optocouplers. OPTO click board uses four MikroBUS lines (INT, CS, RST, AN) to communicate with the target board microcontroller. It also features six on-board screw terminals that ensure simple and secure connections. OPTO click operates on a 3.3V or 5V power supply, which can be selected using a SMD jumper.

OPTO click is an ideal choice for PLC and ATE I/O isolation, high-speed A/D and D/A conversion, digital control power supply, computer peripherals, microprocessor system interface, multiplexed data transmission and many more.

MIKROE-1196

$20.52

Opto encoder Click Board

The Opto Encoder Click Board is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. Encoders of this type are widely used for many applications which involve precise detection of the position, speed, or rotational angle of an object. Rotary encoders are often used for various types of controllers on many different devices. Whether it be a rotary encoded knob controller or a rotation encoder on a motor shaft, the principle is the same - it includes an optical sensor, just like the one found on Opto Encoder click.

MIKROE-2549

$8.80

OSD Click Board

The OSD Click Board is an add-on display board intended to add monochrome on-screen display (OSD) generator to the user design. The board employs a combination of a MAX7456 single-channel monochrome OSD generator module, integrated EEPROM memory as well as two RCA sockets. It is preloaded with 256 user-programmable characters or pictographs in NTSC and PAL standards. MAX7456 module is ideally-suited for creating on-screen menus, or place the company logo in the streaming video. It has a 12x18 pixel character size and can easily display information in up to 16 lines of 30 characters each. For communication with target board microcontroller, the OSD click makes use of MikroBUS SPI (SDI, SDO, SCK, CS#), RST, LOS, HSYNC and VSYNC lines. The board is designed to operate on 5V power supply only. OSD click is an ideal option for consumer electronics, in-cabin entertainment, industrial applications, security cameras, security switching systems, and many more.

MIKROE-1366

$34.20