The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


Methane Click Board

The Methane Click Board™ makes it simple for the user to add a highly sensitive methane (CH4) sensor to his design. This add-on board comes equipped with an MQ-4 sensor for measuring methane, two jumpers and a power indicator LED. It has also got a calibration potentiometer and a MikroBUS host socket. The range in which Methane Click Board™ can precisely detect the methane levels is from 200 to 10000ppm of concentrations. The MQ-4 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean air. As the percentage of methane increases in the environment, the conductivity rises too. The potentiometer enables the user to adjust the load resistance of the sensor circuit so that methane Click Board™ may be calibrated for the intended surroundings. As the concentration of the target gas changes, the resistance of the sensor component also gets changed.

Methane Click Board™ finds its application in designing of gas leakage equipment. Being suitable for detecting methane concentration, Methane Click Board™ can be used in the devices like domestic gas leakage detectors, industrial combustible gas detectors and portable gas detectors.



Mic 2 Click Board

The MIC 2 Click Board™ is equipped with a small electret microphone, accompanied by a suitable preamplifier circuit. The small electret microphone is not capable of providing sufficient line-level output; therefore, the pre-amp has to be used. The pre-amp circuit consists of a dual op-amp and a digitally controlled potentiometer IC. Thanks to the AD5171, it is possible to control the feedback loop gain of the MCP6022 op-amp over the I2C interface, in 64 discrete steps. The AD5171 digital potentiometer IC can lock-out its wiper by means of OTP fuse bit: once locked, it will permanently retain the programmed value.

MIC 2 click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.



Mic Click Board

The Mic Click Board™ is based on the SPQ0410HR5H-B surface mount silicon microphone with maximum RF protection.

The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the AN pin on the MikroBUSline.



MIC23099 Click Board

The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click Board™ is designed to run on a 3.3V power supply.

It communicates with the target microcontroller over the following pins on the mikroBUS line: CS, INT.



MIC24045 Click Board

The MIC24045 Click Board™ is based on the MIC24045 I2C-programmable, high-efficiency, wide input range, 5A synchronous step-down regulator from Microchip.

The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface with additional functionality provided by the following pins on the MikroBUSline: RST, INT.



MIC24055 Click Board

The MIC24055 Click Board™ is the buck regulator that can deliver continuous output current up to 8A and can step down voltages from up to 19V which makes this Click Board™ easy to use with many power sources commonly available. The amount of current it can deliver and the steady, ripple-free regulated voltage, make this Click Board™ a perfect choice for powering up devices which require high current, regulated power supply, such as servers and workstations, routers, telecom equipment and every other electronic device with similar power demands.



MIC33153 Click Board

The MIC33153 Click Board™ is a DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads, with the voltage output up to 3.5V. The ultra-fast transient response and the ripple free output voltage are some of the main features of this DC-DC step-down converter. The proprietary HyperLight Load technology allows very efficient step-down conversion even for very light loads.



micro:bit Click Board Adapter

The micro:bit Click Board™ adapter comes comes equipped with two proprietary mikroBUS sockets, allowing all the Click Board™ devices to be interfaced with the micro:bit with no effort at all. It is enough to place the small standard add-on board of your choice on the top of the mikroBUS socket - and Click Board™ it in. That is why this small add-on board is called Click Board™ - it just Click Board™s!



£19.20 (save 9%)

Microphone AMP Board

The Microphone AMP Board is an accessory board that amplifies audio signals detected by the microphone provided on-board. The microphone is connected to a LM4864 audio power amplifier that works well for use in low-voltage consumer applications. The detected audio signals are amplified and sent to the connector used to connect a loudspeaker with an impedance of 4, 8, or 16 Ω. In order to keep the external part count low, the gain is internally set to 20. However, with the addition of a potentiometer and capacitor between pins 1 and 8, user can increase the gain up to 200. Microphone AMP Board is provided with screw terminals for easy connectivity. The power supply voltage has to be stabilized and in a range between 3.3V and 5V DC.

With such features, Microphone AMP Board is an ideal choice for general purpose audio applications, cellular phones, personal computers, and many more.



microSD card 16 GB with adapter

microSD card 16 GB or SD Card is a very popular storage media, which offers huge amounts of storage area. SD Cards are on the market for quite some time. They are constantly evolving and improving, offering higher memory capacities, faster data rates, shorter access times, etc. The SD Card standard was irst introduced in August 1999 by joint efforts between SanDisk, Panasonic (Matsushita Electric), and Toshiba, as an improvement over existing MultiMediaCards (MMC) standard. Since then, several revisions have been made. The microSD Card is the smallest SD Card version with the only 5mm in length and 11mm in width.



microSD card 2GB with adapter

microSD card 2GB with adapter.



microSD card 4GB with adapter

microSD card 4GB with adapter.