Click Blocker Tracking
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

Accel 7 Click Board

The Accel 7 click is a tri-axis acceleration sensing Click board™ powered by the KXTJ3-1057 14-bit tri-axis digital accelerometer from Kionix. This sensor was developed using proprietary Kionix micromachining technology, resulting in high accuracy and excellent noise immunity. Accel 7 click supports a wide range of applications that require low power consumption, fast response, precision, and reliability. As such it can be used for motion detection, display orientation, HID applications, drop detection applications (for warranty logging), and similar applications that rely on acceleration and motion-sensing.

It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

MIKROE-3244

£15.60

Accel 8 Click Board

Accel 8 click is an advanced 6-axis motion tracking Click board™, which utilizes the MPU6050, a very popular motion sensor IC, equipped with a 3-axis gyroscope and 3-axis accelerometer. It also features Digital Motion Processor™, a very powerful processing engine, which reduces the firmware complexity and the processing load of the host MCU. The output of each axis is digitized by a separate 16-bit ADC and processed by the DMP engine, offering motion data over the I2C Interface. Packed with a set of very powerful options, this Click board™ represents an ideal solution for the development of MotionInterface™ based applications.

Accel 8 click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

MIKROE-3341

£22.80

Accel Click Board

Introduce accelerometer functionality to the device with the Accel Click Board. This accessory board features an ultra-low power ADXL345 3-axis digital accelerometer capable of high resolution measurement up to ??16 g. The high resolution (13-bit) allows measurement of inclination changes less than 1.0??. The module is packed with special sensing functions, which includes activity/inactivity sensing, tap sensing, free-fall sensing. Accel click is integrated with a 32-level first in, first out (FIFO) buffer, which can be used to store data to minimize host processor intervention. The board communicates using I2C or SPI interface with the target board microcontroller, which can be selected using the J1, J2 and J3 SMD jumpers. Accel click is designed to use a 3.3V power supply only. The green LED diode denotes the power supply status.

With such features, this measurement board is an ideal choice for defense and aerospace applications, mobile devices, medical and industrial instrumentation, hard drive protection and many more.

MIKROE-1194

£16.28

Accel SPI Board

The new Accel SPI Board is a three-axis acceleration measurement tool that comes with an ADXL345 three-axis accelerometer circuit. This 3-axis acceleration tool is designed to measure static acceleration of gravity in tilt-sensing applications as well as dynamic acceleration resulting from motion or shock. It comes with a selectable measurement range of ??2g, ??4g, ??8g, or ??16g. It is connected to the microcontroller on the development board through pad pins.

The Accel SPI Board operates on low power consumption and is thus, well-suited for mobile device applications. The Accel SPI Board with high resolution (4 mg/LSB) allows measurement of even less than 1.0?? of change in inclination. The digital output data is formatted as 16-bit Twos Complement and is accessible via industry-standard serial SPI communication interface. The Accel SPI Board is powered by embedded FIFO technology and thus, minimizes the host processor load. Designed for high performance, this compact-sized board is designed to operate using a 3.3V power supply only.

MIKROE-473

£21.20

Active GPS Antenna

This active GPS Antenna is 100% waterproof external antenna that can be used with our GPS and GNSS Click boards™. If you are looking for a perfect external antenna for your locator device, this is the right product for you.

MIKROE-363

£8.48

ADAC Click Board

The AC Click Board an 8-channel 12-bit ADC, DAC and GPIO.

The click is designed to run on either 3.3V or 5V power supply. ADAC click communicates with the target microcontroller over I2C interface, with additional functionality provided by the RST pin on the MikroBUS line.

MIKROE-2690

£22.28

Adapter Click Board

Adapter click is a breakout board to add MikroBUS to IDC10 adapter to the user design. This accessory board is intended to easily connect IDC10 headers to the seventh generation development boards with MikroBUS sockets. It also has 2x5 connection pads that are compatible with MikroElektronika's IDC10 modules. Adapter click features two ways of establishing connection: using male or female IDC10 connectors, or using IDC10 flat cable and soldering it either on the top, or the bottom side. However, in some cases, female header socket is a better choice, depending on user and design convenience. Adapter click has two jumpers: one for SPI/I2C selection and another one for selection of power supply range. Adapter click is designed to use a 3.3V or 5V power supply. Adapter Click communicates using MikroBUS.

MIKROE-1432

£5.57

ADC 2 Click Board

If your design requires higher accuracy measurement than what a 12-bit Analog-to-Digital Converter (ADC) could provide, then considering ADC 2 click would prove to be an ideal choice. ADC 2 click incorporates the MCP3551 IC.

MIKROE-1893

£20.57

ADC 3 Click Board

ADC3 click carries Microchip’s MCP3428 16-bit multichannel analog-to-digital converter. The click has four pairs of screw terminals onboard, letting you access the chip’s four differential input channels

MIKROE-1894

£18.85

ADC 4 Click Board

The ADC 4 Click Board is an advanced analogue to digital multi-channel converter, which can sample inputs from 16 single-ended channels or 8 differential input channel pairs. This device has a quite high sampling resolution of 24 bits and the output data rates can range from 5 SPS to 250 kSPS. Besides the internal 2.5V reference voltage source, ADC 4 click is also equipped with an external reference voltage circuit, which provides 4.096V. Finally, a custom reference voltage - up to 5V can be connected to the multiplexed inputs of the ADC converter. These options give a lot of flexibility in choosing the right reference voltage for any application.

MIKROE-2879

£55.72

ADC 5 Click Board

The ADC 5 Click Board is a device used to sample an analog voltage on the input and convert it to a digital information. In general, ADC (analog to digital converters) are the most commonly used devices for converting the voltage signals into an information, which can be then processed in the digital domain. There are many types of ADC converters commercially available. They can vary in bit depth, sample rate, used approximation algorithm (SAR, delta-sigma...) and so on. Those attributes affect how accurately the sampled voltage will be translated into the digital world.

MIKROE-2846

£15.43

ADC 6 Click Board

The ADC 6 Click Board is an advanced 24bit multichannel analog to digital converter (ADC), with 8 fully differential or 15 single ended/pseudo differential sampling inputs, and very flexible routing capabilities. The click board has two 2x10 pin headers, used both to configure the device and connect the input channels. This allows for unrestrained configuration of the device, so it can use both bipolar and unipolar input sources, with selectable reference voltages, external clock, auxiliary power switch, and more.

MIKROE-2932

£24.85