MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
OPTO Click Board
Introduce electrical isolation between inputs and outputs to the device using the OPTO Click Board. The board has two DIP VO2630 dual-channel optocoupler modules that enable high speed (10 MBit/s) data transfer between its input and output with galvanic isolation. The DIP8 sockets allow for easily replacement of optocouplers. OPTO click board uses four MikroBUS lines (INT, CS, RST, AN) to communicate with the target board microcontroller. It also features six on-board screw terminals that ensure simple and secure connections. OPTO click operates on a 3.3V or 5V power supply, which can be selected using a SMD jumper.
OPTO click is an ideal choice for PLC and ATE I/O isolation, high-speed A/D and D/A conversion, digital control power supply, computer peripherals, microprocessor system interface, multiplexed data transmission and many more.
Opto encoder Click Board
The Opto Encoder Click Board is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. Encoders of this type are widely used for many applications which involve precise detection of the position, speed, or rotational angle of an object. Rotary encoders are often used for various types of controllers on many different devices. Whether it be a rotary encoded knob controller or a rotation encoder on a motor shaft, the principle is the same - it includes an optical sensor, just like the one found on Opto Encoder click.
OSD Click Board
The OSD Click Board is an add-on display board intended to add monochrome on-screen display (OSD) generator to the user design. The board employs a combination of a MAX7456 single-channel monochrome OSD generator module, integrated EEPROM memory as well as two RCA sockets. It is preloaded with 256 user-programmable characters or pictographs in NTSC and PAL standards. MAX7456 module is ideally-suited for creating on-screen menus, or place the company logo in the streaming video. It has a 12x18 pixel character size and can easily display information in up to 16 lines of 30 characters each. For communication with target board microcontroller, the OSD click makes use of MikroBUS SPI (SDI, SDO, SCK, CS#), RST, LOS, HSYNC and VSYNC lines. The board is designed to operate on 5V power supply only. OSD click is an ideal option for consumer electronics, in-cabin entertainment, industrial applications, security cameras, security switching systems, and many more.
Oximeter Click Board
Oximeter click is a versatile photometric Click board™, perfectly suited for measuring the blood oxygen saturation. It employs ADPD105, a highly configurable photometric front end (AFE) device from Analog Devices. Almost all parameters of the IC are user-configurable, allowing this AFE IC to be used on a wide range of various photometric applications. It utilizes two LEDs (red and infrared), and one photodiode (PD) sensing element, making it is possible to get very accurate and reliable oximetry readings. For those who want to expand the functionality of this Click board™. It offers two headers located on the sides of the Click board™, which allow expanding it with different types of LEDs, PDs, reconfiguring its purpose that way
Ozone 2 Click Board
The Ozone 2 Click Board is based on the Winsen MQ131 sensor for Ozone (O3). The sensor outputs an analogue voltage, which is converted by the on-board MCP3551 22-bit ADC converter or it is sent to the microcontroller via AN pin on the mikroBUS, depending on the position of ADC SEL. jumper.
The click is designed to run on 5V power supply. It communicates with the target microcontroller over SPI interface or AN pin on the mikroBUS line.
Ozone Click Board
The Ozone Click Board carries a MiCS-2614 compact MOS sensor for ozone (O3) detection. Its detection range is from 10-1000ppb. An on board 12-bit ADC converts the analogue measurement to digital.
Ozone Click is a MikroBUSadd-on board with a MiCS-2614 compact MOS sensor for ozone (O3) detection. Its detection range is from 10-1000ppb. It's a small (5 x 7 x 1.55mm) MEMS sensor consisting of a micro machined diaphragm with an embedded heating resistor and the sensing layer on top.
The sensor outputs an analogue voltage, which is converted by the on board MCP3201 12-bit ADC converter.
PAC1921 Click Board
The PAC1921 Click Board is a versatile power monitoring and measuring device intended for the high speed, low latency measurements. This device can measure current, voltage or the power of the connected load. PAC1921 click features an integrated average power measurement, it can output the measured properties in the form of a filtered analog voltage level by using 10bit DAC, provides 1x to 128x current binary gain, it has an integrated second order input ADC, automatic zero offset, and all the measured values are available through the serial SMBus/I2C interface.
PAC1934 Click Board
The PAC1934 Click Board carries the PAC1934 four channel DC power/energy monitor from Microchip. The click is designed to run on either 3.3V or 5V power supply.
It communicates with the target microcontroller over an I2C interface.
Pedometer 3 Click Board
Pedometer 3 click is an acceleration sensing and step counting Click board™ equipped with the KX126-1063, an advanced tri-axis acceleration sensor IC, which features several acceleration detection algorithms, including a pedometer. The micro-electromechanical sensor (MEMS) element itself is based on the principle of measuring the differential capacitance, which further decreases errors due to manufacturing imperfections and temperature. The MEMS element is coupled with a very sophisticated application-specific IC (ASIC), which offers many advanced features, such as the 2048-byte FIFO buffer, pedometer algorithms, tap, and double tap sensing algorithms, free fall algorithms, tilt single/double pole IIR filtering, and more.
It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.
Pi 3 Click Board shield
By adding two mikroBUS sockets to your Raspberry Pi 3, the Pi 3 Click Shield allows you to experiment with hundreds of click boards from our ever expanding range. WiFi, Lora, Bluetooth, GSM, GPS, RFID, OLED, speech recognition, environmental sensors, movement sensors, biosensors, LEDs, relays, ?? you name it, we got it!.
The Pi 3 Click Shield is compatible with Raspberry Pi 3 model B, 2 B, 1 A+ and B+.
PIC Clicker Board
The PIC Clicker is an amazingly compact starter development kit which brings innovative mikroBUS host socket to your favourite microcontroller. Board features all you need to get started: PIC18F47J53 microcontroller, USB connector, two LEDs and push buttons, reset button, mikroProg connector and headers for interfacing with external electronics.
This compact board brings flexibility of click add-on boards to your favorite microcontroller, making it a perfect starter kit for implementing your ideas.
PIC-Ready2 board is a prototype board for 18-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.