The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

NB IoT Click Board

NB IoT click is a Click board™ that allows LTE Cat NB1 connectivity by utilizing Quectel BC95-G, a specialized multi-band IoT module with very low power requirements and compact form factor, making it perfectly suited for various IoT-based applications. This module is an embedded IoT communication solution which supports several NB frequency bands, offering an alternative to similar Low Power Wide Area Network (LPWAN) solutions, such as those offered by Sigfox and LoRa. Its most important advantage is the ability to use already widely established cellular network infrastructures. These features make the NB IoT click a perfect choice for a wide range of IoT applications such as smart metering, bike sharing, smart parking, smart city, security and asset tracking, home appliances, agricultural and environmental monitoring, and more.

Note: To ensure the best performance, please use an antenna that supports frequency bands used by the Quectel BC95-G module
It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

MIKROE-3294

£62.40

NDIR CO2 Click Board

NDIR CO2 click is an advanced integrated CO2 gas sensor system, which is able to measure an absolute CO2 concentration, by utilizing the CDM7160 integrated sensor. This sensor is based on non-dispersive infrared sensing principle (NDIR), with two detection elements: one is used for detecting the wavelength of the IR light spectrum, affected by the CO2 gas, while the other detects the wavelength of the IR light spectrum not affected by the CO2 gas. The integrated MCU processes the readings and outputs the absolute CO2 gas concentration value through UART or I2C interface. Dual wavelength sensing method allows not only accurate absolute readings, but also provides immunity against dust pollution, providing consistent readings in corrosive atmosphere, variable ambient temperature, and over longer periods of time.

MIKROE-3134

£174.00

NFC Click Board

NFC click is a mikroBUS™ add-on board with a versatile near field communications controller from NXP — the PN7120 IC.
NFC devices are used in contactless payment systems, electronic ticketing, smartcards, but also in retail and advertising — inexpensive NFC tags can be embedded into packaging labels, flyers or posters.


MIKROE-2395

£29.15

NFC Tag 2 Click Board

The NFC Tag 2 Click Board carries the NT3H1101 NTAG I2C energy harvesting NFC Forum Type 2 Tag from NXP. The click is designed to run on a 3.3V power supply only.

It communicates with the target MCU over I2C interface and the INT pin (field detection) on the MikroBUSline.

MIKROE-2462

£10.28

NFC Tag Click Board

The NFC Tag Click Board is an accessory add-on board from MikroElektronika carrying an M24SR64 NFC/RFID tag IC with a dual interface. It is embedded with a highly-reliable 8KB EEPROM memory. The user can operate NFC Tag click in three different ways: via I2C interface, with a 13.56MHz RFID reader, and with an NFC-enabled smartphone, tablet, or similar device. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. The click board communicates with the target board microcontroller using MikroBUS I2C (SCL, SDA), INT and RST lines.

The NFC (Near Field Communications) Tag click features a PCB antenna that operates at a very close range (around 3cm), which makes it quiet secure as for developing mobile payment systems (some credit cards, Apple Pay, Google Wallet, etc.), or any short-range wireless data exchange. NFC Tag click is designed to use a 3.3V power supply only.

MIKROE-1726

£10.28

NFC USB Dongle

The NFC USB Dongle is an NFC Reader-Writer based on NXP??s PN7150 high-performance full NFC controller, supporting all NFC Forum modes. The USB NFC Dongle is powered through USB connector.

This NFC controller supports all NFC Forum communication modes like peer to peer, reader/writer and Host Card Emulation. It allows interacting with all NFC devices on the market according to NFC Forum: from simple NFC tags to NFC-enabled smartphone.

MIKROE-2540

£24.85

NO2 Click Board

NO2 click is a very accurate nitrogen-dioxide gas sensor Click board™, equipped with the SPEC amperometric gas sensor which electrochemically reacts with the nitrogen-dioxide (NO2). It is supported by the LMP91000, a high-precision integrated analog front-end IC (AFE), perfectly suited for use in electrochemical sensing applications. The Click board™ also provides the reference voltage required by the sensor and offers a choice between the analog output from the AFE IC buffered with the low noise op-amp, and digital output from the 12-bit SAR A/D converter.

MIKROE-3098

£60.12

Noise Click Board

Noise click is a mikroBUS add-on board with noise detecting circuitry. It enables you to set a noise detection threshold for alarm systems, environmental monitoring or data logging.

MIKROE-2371

£24.85

nRF C Click Board

Introduce a 2.4 GHz transceiver to your design with the nRF C Click Board! MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. The nRF C click carries a 2.4 GHz SMD chip antenna, which basically differentiates the click board from the other nRF clicks. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400.

MIKROE-1304

£16.28

nRF S Click Board

Introduce a 2.4 GHz transceiver to your design with the nRF S Click Board! After the launch of nRF T and nRF C, MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. It carries an SMA antenna connector, which basically differentiates the click board from the other two nRFs. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400.

MIKROE-1836

£16.28

nRF T Click Board

Introduce a 2.4 GHz transceiver to your design with the nRF T Click Board! MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. The nRF T Click Board carries an on-board PCB trace antenna, which basically differentiates the click board from the other two nRF clicks. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400.

MIKROE-1305

£13.72

OBD-II to DB9 cable

The OBD II to DB9 cable enables you to connect with your car??s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II click.

The overall length of the cable is five feet (152cm).

MIKROE-2838

£10.28