MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
TFT PROTO 5" Capacitive
The TFT PROTO 5" Capacitive carries the 800x480 RVT50AQTNWC00 TFT screen. The SSD1963 display controller drives the TFT display, with a 1215K byte buffer that supports up to 864x480 at 24bpp displays.
TFT Proto 5in
Add a touchscreen display to a prototype or a final product using the TFT Proto 5" board. It includes an 800x480-pixel HT050AWV40T TFT screen, capable of displaying 262K different colours. The screen is covered by a 4-wire resistive touchscreen panel driven by an STMPE811 touchscreen controller. The display is driven by an SSD1963 graphics controller with an 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (via the GPIO0 pin on the side of the board for added convenience). Two rows of 26 pins provide an interface to the host microcontroller with 16 data and 7 control lines for the graphic controller, I2C lines and an interrupt line for the touchscreen controller. The TFT Proto 5" board has four corner mounting holes that simplify integration to the design. It is designed to use a 3.3V power supply only.
With such features, TFT Proto 5" make an economical and hands-on option for adding a TFT touchscreen interface to your design.
TFT PROTO 7"
Add a touchscreen display to a prototype or a final product using the TFT Proto 7" board. It includes an 800x480-pixel FRD070IF40-A TFT screen, capable of displaying 262K different colours. The screen is covered by a 4-wire resistive touchscreen panel driven by an STMPE811 touchscreen controller. The display is driven by an SSD1963 graphics controller with an 8/9/16/24-bit MCU interface that includes a deep-sleep power saving mode (via the GPIO0 pin on the side of the board for added convenience). Two rows of 26 pins provide an interface to the host microcontroller with 16 data and 7 control lines for the graphic controller, I2C lines and an interrupt line for the touchscreen controller. The TFT Proto 7" board has four corner mounting holes that simplify integration to the design. It is designed to use a 3.3V power supply only.
With such features, TFT Proto 7" make an economical and hands-on option for adding a TFT touchscreen interface to your design.
Thermo 2 Click Board
The Thermo 2 Click Board is a measurement accessory board that includes DS1825, a programmable resolution 1-wire digital thermometer. The digital thermometer provides 9 to 12-bit centigrade temperature measurements and communicates over a 1-Wire bus. The DS1825 chip has a unique 64-bit serial code, which allows the user to connect multiple DS1825s to function on the same 1-Wire bus.
THERMO 2 click has a measuring range between
Thermo 3 Click Board
The MikroE Thermo 3 click is a temperature measurement board that incorporates an ultra-compact TMP102 IC from Texas Instruments. TMP102 chip works as a digital temperature sensor and is ideal for applications where high accuracy is required. It provides accuracy of ??0.5??C without requiring calibration. Offered in a tiny footprint of 1.6-mm ?
Thermo 4 Click Board
The THERMO 4 Click Board is based on the LM75A digital temperature sensor and thermal watchdog. The sensor has the range from −55 °C to +125 °C.
The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the MikroBUS™ line.
Thermo 5 Click Board
The THERMO 5 Click Board measures temperature in default range of 0
Thermo 6 Click Board
The Thermo 6 Click Board is a precise and versatile ambient temperature measurement click board™, based on the Maxim Integrated MAX31875 temperature sensor.
This sensor has a great combination of features, such as wide range of temperature measurement, excellent measuring accuracy, and small die size, coupled with the very low power consumption - attributes that make this sensor a great choice for many different applications.
Thermo 7 Click Board
The Thermo 7 click is a Click board™ equipped with the sensor IC, which can digitize temperature measurements between -55°C and +125°C so that the temperature measurement data can be processed by the host MCU. Thermo 7 click provides an accuracy of ±1°C in the range from -10°C to +85°C. The sensor used on this Click board™ has a great combination of features that make it a perfect choice for any temperature measurement application: low power consumption, selectable sampling resolution, programmable interrupt engine, compact sensor size, alert output pin, and more. The sensor itself requires almost no external components, which simplifies the design, reducing the cost and cutting the time to market.
Thermo Click Board
The Thermo Click Board is a compact accessory board that employs a MAX31855K thermocouple-to-digital converter. It performs cold-junction compensation, resolves temperatures to 0.25
Thermo J Click Board
The Thermo J Click Board is a temperature measurement click board™, which uses a thermocouple type-J probe, connected to a PPC-SMP-J onboard connector. The active part of the Thermo J click is MCP9600 by Microchip - a thermocouple EMF to temperature converter, with 1.5°C of maximum accuracy. The on-board PCC-SMP-J connector ensures the secure connection and accurate readings for the connected thermocouple.
The main advantage of the thermocouples over some other types of temperature measuring devices, is a wide range of temperatures that they can measure. With the addition of four programmable ALERT lines routed to the mikroBUS™ pins, Thermo J click is an ideal solution for the temperature measurements in extreme conditions, hard to reach places, machinery, and similar applications.