The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


PWR Meter 2 Click Board

PWR Meter 2 click is a compact and accurate power monitoring Click board™, capable of measuring and monitoring voltage up to 24V and current up to 5A. It carries the MCP3910, an integrated Analog Front End (AFE) device, which consists of two delta-sigma A/D Converters (ADC), two Programmable Gain Amplifiers (PGA), phase delay compensation section, voltage reference section, digital offset and gain error calibration registers, and industry-standard SPI interface. This device allows to build power monitoring device with a reasonably low count of elements: A current sensing resistor connected to one channel with the voltage divider connected to the second channel is all that it is required to perform an accurate power measurement.



PWR Meter Click Board

PWR Meter click is a power measurement Click board™, capable of measuring voltage and current through the load, connected to either AC or DC power source. PWR Meter click uses the MCP39F511A, a very sophisticated monitoring IC from Microchip, with 16-bit processing core. It is used to calculate all the measurement parameters, returning values of multiple power parameters directly, over the UART interface, reducing the processing load on the host MCU. These parameters include active, reactive, and apparent power, current and voltage RMS, line frequency, and power factor.



Qi Receiver Click Board

Qi Receiver click is based on the P9025AC 5W Qi wireless power receiver integrated circuit, with the advanced Foreign Object Detection (FOD) feature, from IDT. The click utilizes the principles of the inductive coupling for the purpose of wireless power transfer. Recently, the WPS Qi wireless power transfer standard is becoming widely used, for example - wireless charging of the batteries on many Qi wireless power charging compliant devices. Qi Receiver click is well-suited for a wide range of applications, including cell phones, tablets, PC peripherals, medical devices, small hand-held devices, in robotics, embedded electronics, etc.Note: Qi Receiver click has to be placed near the suitable Qi Transmitter, also known as the charging pad, to successfully harvest the transmitted power.



Quail Board

The Quail Board is an STM32-powered development solution for building hardware prototypes with click boards and C# managed code. It brings together click boards and Microsoft??s .NET Micro Framework for embedded devices (NETMF).



R Meter Click Board

The R Meter click is a mikroBUS add-on board with circuitry for measuring the value of resistors. The board can be used to measure a wide range of resistors (from 0 to 1 Mega Ohm) The design is based on a non-inverting amplifier circuit, with the measured resistor placed in a feedback loop that influences the gain of the amplifier



R2R DAC Board

The R2R DAC Board is a DAC module based 8-bit Digital to Analog Converter that provides a perfect way for converting a digital voltage signal into analog. This performance driven additional board supports high quality 8-bit resolution. Making use of the R/2R resistor network, the board facilitates conversion of an 8-bit value from the microcontroller port into an equivalent analog voltage.

While the R2R DAC Board requires 2N resistors for successful execution of the N-bit conversion process, it actually makes use of only two resistor values. The resistor values are in the ratio of 1:2. The R2R DAC additional board has been provided with a 2x5 connector CN1 through which it gets connected to a development system. The connection gets completed via one of the 2x5 connectors provided on the development system itself. The analog voltage signal gets delivered via a screw terminal CN2.

The R/2R ladder DAC comes equipped with MCP6284 operational amplifier. This amplifier is used as a buffer in order to drive loads with current consumption of up to 20mA. Additionally, it also supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS.



RadioStation Click Board

The RadioStation Click Board is a unique click board that can be used to broadcast the music via the FM radio band. It features the Si4713-B30 from Silicon Labs, the best in class integrated FM broadcast stereo transmitter, which operates in the frequency range of 76MHz to 108MHz. It can also broadcast RDS/RDBS data. The click board can be equipped with a small FM antenna, which is used to extend the broadcasting range.



Raspberry Pi Click Shield - connectors unsoldered

The Raspberry Pi Click Shield is an expansion board for the popular Raspberry Pi mini-computer. This simple shield carries a MikroBUS host socket makes your Raspberry Pi compatible with more than 170 different click boards. Ranging from commonly used functionalities GSM, GPS, Wi-Fi, ZigBee, Bluetooth, to the more unusual ones, like thunder detection, proximity, heat or colour sensing, the user can add a wide range of functionalities or can even combine two together. The Pi click shield fits perfectly to the Raspberry Pi and transforms it from an easy-to-use mini-computer to a click board enriched super-gadget backed with amazing features. The package comprises of two 1?.




Designed to meet the demands of Raspberry Pi enthusiasts for better audio output, RaspyPlay4 is a highly functional and innovative add-on board that connects directly to the Raspberry Pi (model B+ onward) using the 40-pin GPIO header. The RaspPlay4 has two standard RCA stereo ports and a line-out for connection to headphones and other audio devices. The availability of connectors for an IR receiver and an LCD on-board makes it a formidable audio station and server. RaspyPlay4 features a PCM5122 DAC that provides high-quality audio without any electromagnetic interference. It is designed to support various sound formats, including FLAC, ALAC, MP3, and WMA sound formats. When talking about the software configuration, this board shows high compatibility with several solutions.

However, RuneAudio is recommended by MikroElektronika. Its biggest feature will be your music library. The user can play music on RaspyPlay4 from a USB flash, a USB hard drive, an SD Card, a NAS server, or even stream it through AirPlay, or any other web radio.



Ready for AVR Board

The Ready for AVR Board is the board for development of devices using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit.



Ready for PIC (DIP28)

The Ready for PIC (DIP28) Board is the best solution for fast and simple development of microcontroller applications using 28-pin PIC MCUs. It comes with PIC18F25K22 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is specially designed to fit into special white plastic casing which is sold separately.

Board comes preprogrammed with fast UART bootloader which eliminates the need for external programmers. Board also supports fast USB 2.0 mikroProg™ programmer with hardware In-Circuit Debugger.

Ready for PIC (DIP28) is fully supported by mikroC, mikroBasic and mikroPascal compilers for PIC. Compilers come with dozens of examples that demonstrate every feature of the board.
On-board power supply regulator is great. It supports dual power supply, for both 5V and 3.3V microcontrollers. It features standard power connector, and screw terminals for even easier connectivity.



Ready for PIC Board

The Ready for PIC Board is the best solution for fast and simple development of microcontroller applications using 28- and 40-pin PIC MCUs. It comes with PIC18F45K22 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is specially designed to fit into special white plastic casing which is sold separately.