MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
TouchKey Click Board
The TouchKey Click Board features four capacitive pads powered by the TTP224 touchpad detector IC. TTP224 chip comes with multiple operating modes that allow the user to configure how the buttons will work. The capacitive pads can be toggled even when placed under a layer of glass or paper. TouchKey Click outputs four interrupt signals: OUTA, OUTB, OUTC and OUTD in place of default MikroBUS RST, AN, PWM and INT pins, respectively. It features three on-board jumpers enable the user to configure several operating modes of the TTP224 IC, including fast mode or low power mode, direct or toggle mode, enable/disable multi-key input, and so on. TouchKey Click is designed to work on either 3.3V or 5V power supply.
It works as an ideal replacement for mechanical switches and buttons, and being capacitive, it can register inputs through paper or glass.
TouchPad Click Board
Introduce an input device to the prototype using the Touchpad Click Board from MikroE. With a small form factor, this click board acts as a minimalistic capacitive touch input device powered by Microchip
TouchPanel Connector Board
The TouchPanel Connector Board is a prototyping tool that is used for connecting GLCD touch panel. The board is provided with a plastic touchscreen-cable clamp bar in order to easily secure a touchscreen ribbon cable. It provides a connector for easy interfacing to a 4-wire touchscreen flat ribbon cable for prototyping work. The touch screen ribbon cable clamp bar can be broken or damaged when removing the touch screen cable from the main board. This board also can be used as a great replacement if the touchscreen FFC clamp bar on the development system was broken or damaged.
It is designed for easy prototyping and suitable for use with solderless breadboards.
Note: The connection pads of the board are unpopulated in order to let the user decide on how to connect the board to the development system. It has male header pins for typical breadboard use.
TouchPanel Controller Board
Introduce touch panel input functionality to any MikroElektronika
TouchPanel Controller PROTO
Add a cost-effective solution to bring touch panel input to any MikroElektronika
tRF Click Board
The tRF Click Board is an RF communication board featuring the Telit LE70-868 wireless transceiver module. Along with the LE70-868 short range module, the board incorporates an SMA connector for an antenna, two radio communication LEDs, and a MikroBUS connector. Telit LE70-868 is an 868 MHz transceiver module with an embedded stack that is easy to integrate and use in point-to-point or star network topologies.
tRF click enables radio data rates from 4.8 to 57.6 kbps with maximum output power of 500mW, and features a wireless range of up to 10km in line-of-sight. However, this is the case for ideal conditions with no barriers to disrupt the signal. The user can still achieve a range of over 4km in open space under mixed conditions.
The tRF click board also includes two radio LEDS: transmit (red) and receive (yellow). It uses MikroBUS UART (Rx, Tx), AN, RST, PWM and INT lines for communication with the target board MCU. tRF click is intended to use a 3.3V power supply only.
TSSOP-SSOP-14 to DIP14-300mil Adapter
Convert TSSOP-SSOP 14 pins (300 mil wide) package to DIP 14 pins.
TSSOP-SSOP-16 to DIP16-300mil Adapter
Convert TSSOP-SSOP 16 pins (300 mil wide) package to DIP 16 pins.