MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
USB UART 2 Click Board
The USB UART 2 Click Board provides USB isolation and carries the ADUM4160BRWZ USB port isolator.
The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the MikroBUS™ line: RST, CS, PWM, INT.
USB UART 4 Click Board
The USB UART 4 Click Board offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB to UART interface IC, used on many MikroElektronika devices - both for its reliability and simplicity. USB UART click is used for whenever there is a need to seamlessly and effortlessly interface the UART lines to a personal computer. It can be used with any UART terminal, like the one found in MikroElektronika compilers.
USB UART Board
The USB UART Board is a prototype board that allows for connecting USB devices to the UART module built into a microcontroller. The board offers USB support with an integrated FT232R UART to USB serial converter that simplifies serial to USB designs while reducing the external component count. The board also includes an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal. It performs serial data transfer through UART communication. USB UART Board supports both 3.3V and 5V power supply. A jumper allows for selection of VCC output level.
With such features, USB UART Board is an ideal choice for RS232 communication with hardware modems, printers, barcode readers, wireless applications, and various devices that use UART communication protocol.
USB UART Click Board
A compact and convenient solution to introduce serial UART communication via USB cable
The USB Wizard can communicate with up to four USB devices.
USB Wizard is an evaluation and demonstration platform featuring the USB4604 USB 2.0 4-Port hub controller. The board has four USB 2.0 downstream ports with individual port power control and overcurrent sense (OCS).
UT-L 7-SEG R Click Board
Add a double 7 segment display to your next project.
The UT-L 7-SEG R Click Board carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Maxim Integrated. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface.
UT-M 7-SEG R Click Board
The UT-M 7-SEG R Click Board carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Maxim Integrated. The click is designed to run on either 3.3V or 5V power supply.
It communicates with the target microcontroller over SPI interface.
UT-S 7-SEG R Click Board
The UT-S 7 SEG R Click Board uses two SMD ultra-thin DSM7UA20101 7-SEG LED displays, made with the patented technology that delivers thickness of only 2.1 mm. These displays are driven by the MAX6969, a constant current LED integrated driver from Maxim Integrated, which uses the SPI serial interface for communication and delivers steady and constant power source for the LED segments.
UV 3 Click Board
The UV 3 Click Board is an advanced ultraviolet (UV) light sensor with I2C protocol interface. The click carries VEML6070 UVA light sensor designed by the CMOS process.
UV 3 click runs on either 3.3V or 5V power supply.
UV 4 Click Board
The UV 4 Click Board is a powerful Ultra Violet (UV) sensing device and Ambient Light Sensor (ALS) Click board™, featuring a sensor with a very wide dynamic range of detectable light intensity, across two ADC range settings. The UV diodes are matched to CIE erythema action spectrum, allowing a very accurate calculation of the UV index. The UV Index is standardized by the World Health Organization and it represents the strength of sunburn-producing (UV) radiation.
UV Click Board
Introduce an ultraviolet light sensor to the design with the UV Click Board! The UV click features an easy-to-use ML8511 IC UV sensor that is designed to warn the user of excessive ultraviolet radiation levels and outputs either analog or digital signals that is linearly proportional to the UV intensity it detects. It also features an on-board MCP3201 ADC, which converts the signal, however, one can bypass it and get an analog output by soldering the A/D SEL jumper in the AN position. ML8511 IC UV sensor is sensitive to UV-A (95 percent of Ultraviolet light) and UV-B rays (the one causing sunburns).
UV click makes an ideal choice for making devices that notify the user of sunburn or identify the UV index as it relates to weather conditions. It also finds great use in mobile computing devices, such as, a smart phone, a mobile phone, and a watch, at low power and a compact package (QFN).
UV click communicates with the target board through MikroBUS SPI (CS, SCK, MISO) or AN lines. It is designed to use a 3.3V power supply only.