The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


RS485 5V Click Board

The RS-485 5V Click Board is a compact accessory board designed to add bidirectional data communication to the design. The board features a Texas Instruments ADM485 differential line transceiver that provides high-speed bidirectional data communication on multipoint bus transmission lines. Compliant with EIA standards RS-485 and RS-422, this 5V version of RS485 click is intended for balanced data transmission. RS485 click 5V board features four screw terminals. The two terminals marked with.



RS485 Isolator Click Board

The RS-485 Isolator click is a RS485 communication isolator, and carries the ADM2682EBRIZ, a 5 kV rms signal and power isolated RS-485 transceiver.

The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided by the RST and CS pin on the MikroBUSline.



RTC 2 Board

The RTC 2 Board is an add-on board featuring a low-power DS1307 serial real-time clock (RTC) that enables the microcontroller to keep the real time and date including corrections for a leap year and months with less than 31 days. The DS1307 aboard the RTC2 board is full binary-coded decimal (BCD) clock/calendar with 56 bytes of NV SRAM. The board has integrated power-sense circuit that detects power failures and automatically switches to the backup supply. The board has a female IDC10 connector to plug it into a development system. The RTC2 Board uses the serial I2C interface for communication to the microcontroller. There two options for location of the SCL and SDA pins; their position can be changed by soldering an SMD jumper. It works as extension of existing development boards in applications where real-time data is required. It is designed to operate using a 5V power supply only.

The RTC2 Board is an ideal choice for applications that involves use of real-time clocks, calendars, and programmed alarms.




Ideal choice for real-time clocks, calendars, and programmed alarms, the RTC 2 PROTO Board provides seconds, minutes, hours, day, date, month, and year information. Also, it automatically adjusted for months with fewer than 31 days, including corrections for leap year. It features a DS1307 serial real-time clock (RTC) with a built-in power-sense circuit for detecting power failures. It automatically switches to the backup supply to ensure all timekeeping functions continue, even when the power supply goes off. RTC2 PROTO Board has five pin pads that enable user to easily connect to standard prototyping boards. It features unpopulated pads and unsoldered male header pins.

The RTC2 PROTO Board features an alarm function featuring automatic power-fail detection. It uses the serial I2C interface for communication with your host microcontroller. This add-on board allows user to generate an interrupt and square-wave output signal.



RTC 3 Click Board

RTC3 click carries BQ32000, a real time clock with an integrated trickle charge circuit for automatic switchover to a backup power supply (the circuit maintains the backup charge with an onboard super capacitor).



RTC 4 Click Board

MikroElektronika is here with a new RTC click! RTC 4 Click Board is a time measurement add-on board that incorporates DS2417 IC. The DS2417 is a real-time clock/calendar (RTC) with fully compatible 1-Wire MicroLAN interface. It also features a programmable interrupt output for system wakeup on a separate pin. It utilizes an on-chip oscillator that is connected to an external 32.768 kHz crystal. Being a 1-Wire device, it features a unique, factory-lasered 64-bit long ROM code that allows the user to use it in a MicroLAN network.

It uses a backup energy source that maintains a charge with an on-board coin cell 1F supercapacitor. The real time clock has an accuracy of +/- 2 minutes per month at 25??C. RTC4 click communicates with the target board MCU either through MikroBUS AN or PWM pin (here, GPI01, GPIO0), plus the INT pin, depending on the position of the on-board jumper.



RTC 5 Click Board

The RTC5 click carries MCP79510, a real-time clock/calendar with an SPI interface (mikroBUS MISO, MOSI, SCK and CS pins); along with a programmable interrupt for system output.



RTC 6 Click Board

The RTC6 Click Board carries Microchip??s MCP79410 Real-Time Clock/Calendar IC with built-in 64 bytes of battery-backed SRAM an additional 1 Kbit of EEPROM.



RTC Board

Introduce the functionality of a real-time clock and calendar in the design with the RTC Board. This additional board includes a PCF8583 clock and calendar chip based on 240 x 8-bit RAM organized as 256 words by 8 bits. Driven by a battery cell (not the normal power supply), the operation of the real-time clock is enabled even when the MCU



RTC Click Board

The RTC Click Board is an accessory board designed to add time measuring functionality to the device. This click board has a PCF8583 serial real-time clock/calendar. The PCF8583 IC is a full binary-coded decimal (BCD) clock and calendar chip with 24- or 12-hour clock format with four-year calendar, based on a 2048-bit static CMOS RAM. For communication with the target board microcontroller, RTC Click uses the I2C interface. The board comes with an integrated 3V/230mA lithium battery that serves as a backup power supply. Even when the main power supply goes OFF, this backup power supply enables the device to function continuously. It is designed to use a 3.3V power supply, but can be used with 5V systems by soldering the PWR SEL SMD jumper to the 5V position.

RTC Click is an ideal choice for applications that require real-time clocks, calendars and programmed alarms.




Add real-time clock and calendar functionality to the design using the RTC PROTO Board. This accessory board employs a PCF8583 real-time clock and calendar chip that allows user to keep record of the current time even when the microcontroller is turned off. It features an alarm function and can be used to generate an interrupt as well. The real-time clock is driven by a coin-cell battery which is included.

This board allows easy and quick access to the real time and date along with corrections for leap year. RTC PROTO Board allows easy connection to standard prototyping boards using five pin pads that have a standard 0.1



RTC2 Click Board

Introduce real time clock (RTC) functionality to the design using the RTC 2 Click Board. This add-on board features a low-power Maxim DS1307 serial real-time clock (RTC). It is a full binary-coded decimal (BCD) clock/calendar with programmable square-wave output signal. The board uses standard I2C interface for communication with the target host microcontroller. RTC2 click has a 3V/230mA lithium battery that works as a backup power supply. The timekeeping function continues even when the power supply status is OFF. Real-Time Clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year clock function with four year calendar. It is designed to operate a 5V power supply only. In order to function to a 3.3V system, the user can check go for RTC click.

The RTC2 click is an ideal option who applications involving real-time clocks, calendars, and programmed alarms.