MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
Pollution Click Board
The Pollution Click Board™ has high sensitivity to organic gases such as methanal (also known as formaldehyde), benzene, alcohol, toluene, etc. The Click Board™ carries the WSP2110 VOC gas sensor with the detection range of 1-50ppm (parts per million).
The Pollution Click Board™ is designed to run on a 5V power supply. It communicates with the target MCU via the AN and RST pins on the MikroBUSline.
Port Expander Board
Introduce easy I/O port expansion using a standard serial interface using the Port Expander Board. The board features an MCP23S17 16-bit I/O expander with serial interface. The SPI clock has a speed up to 10 MHz, which makes it highly suitable for higher throughput applications. The Interrupt-on-change feature can be considered as 8 separate external interrupts mapped on to the same interrupt vector. The Port Expander Board features jumpers that enable the user to determine the port expander.
Pot 2 Click Board
POT 2 Click Board™ is a Click Board™ with the accurate selectable reference voltage output. By utilizing a multi-turn precision potentiometer, this Click Board™ can provide very accurate voltage output on the AN pin of the mikroBUS. POT 2 Click Board™ is also equipped with the SMD jumper, which allows the maximum reference voltage to be selected between two typically used values: 2.048V or 4.096V. Using a rail-to-rail buffering operational amplifier which provides constant input and output impedance, this Click Board™ is an ideal solution when accurately controlled voltage reference is required.
Pot Click Board
POT Click is a Click Board™ with the accurate selectable reference voltage output. By employing a high-quality 10mm carbon potentiometer, this Click Board™ can provide very accurate voltage output. POT 2 Click Board™ is also equipped with the SMD jumper, which allows the maximum reference voltage to be selected between two typically used values: 2.048V or 3.3V. The output is buffered with a rail-to-rail buffering operational amplifier, provides constant input and output impedance. The output current is limited by the protection circuit at the output, preventing damage if the output is shorted to GND.
POT Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket.
Add potentiometer functionality to the design using the Potentiometer Board. Designed for testing analog inputs of a microcontroller on a development system, the Potentiometer Board is equipped with eight 10K potentiometers with related jumpers that allows user to enable/disable each one individually. It works as an effective and low-cost solution for testing analog inputs on the prototype board. The on-board potentiometers allow for adjusting voltage levels on the host microcontroller.
Pressure 11 Click Board
Pressure 11 Click Board™ is a digital barometer on a Click Board™. Pressure 11 is equipped with the LPS33HW, an absolute piezoresistive pressure sensor, manufactured using a proprietary technology. This sensor offers many benefits, including low power consumption, high resolution of the pressure data, embedded thermal compensation, FIFO buffer with several operating modes, temperature measurement, etc. The most distinctive feature of this sensor is its ability to measure the pressure within the wide range between 260 - 1260hPa, offering calibrated readings over the SPI or I2C digital interface.
Pressure 12 Click Board
The Pressure 12 Click Board™ is a barometric gauge pressure measuring Click board™, equipped with the Amplified Basic Pressure sensor series (ABP), which features a ratio-metric analog output, which is proportional to the applied pressure. It features a very low Total Error Band of 1.5% of FS, a specification used to describe all the measurement errors and deviations within the sensor itself. The ABP series sensor uses a calibrated and thermally compensated ASIC, providing a ratio-metric output updated at a frequency of 1kHz. It can be directly used by the A/D conversion section of the host MCU, but it can also be directly used in a control feedback loop, for low latency operations.
Pressure 2 Click Board
The Pressure 2 Click Board™ carries MS5803, a high resolution MEMS pressure sensor that is both precise and robust. Its measurement range is from 0 to 14 bars.