MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
AVRPLC16 v6 PLC
The AVRPLC16 v6 PLC System is a full-featured development platform intended for developing and designing industrial, home or office control devices using Atmel AVR microcontroller.
This AVR based PLC system is controlled by ATMEGA32 microcontroller which is connected to 8 MHz oscillator and the rest of the board peripherals. The microcontroller can be replaced by any other AVR microcontroller with a similar pinout. The development system features numerous modules using different communication modules, such as RS-485, RS-232, Ethernet, etc. Along with them, it also has ADC module, RTC module, and MMC/SD connector.
The AVRPLC16 v6 PLC System comes equipped with an on-board USB 2.0 AVR programmer that has been specifically designed for In-Circuit Serial Programming (ICSP). This development board also supports Telit GSM/GPRS modules: GM862-GPS, GM862-QUAD-PY, and GM862-QUAD. The AVRPLC16 v6 PLC System is connected to Ethernet via on-board ENC28J60 to provide network connectivity. The board even has mounting ports for antenna cables and screw terminals for adding a speaker and a microphone. It features 8 opto-inputs and 16 relays (for currents up to 16A).
BarCode Click Board
The Barcode Click Board is a very fast and agile barcode scanner on a click board, which is compliant with a wide range of different 1D and 2D barcode protocols. The barcode scanner module is equipped with the micro USB port; thus, it can work both as a standalone device and a standard click board, which communicates with the MCU via the RX, TX, RST and PWM pin of the mikroBUS. The barcode module has two red LEDs, used to illuminate the area in low light conditions. Also, Barcode click features two push buttons, used to control the device when working as a standalone device.
Bargraph 2 Click Board
The BarGraph 2 Click Board is a 10-segment bar graph display click, which uses a high-quality, multicolour bar graph LED display. The bar graph display is a very popular device for displaying various properties, whether it be an audio level, current/voltage level, position of the encoder, and generally any property that can be displayed in a form of a bar graph. The segments of the onboard bar graph LED display are bright and uniformly coloured, providing a nice and clean visual feedback.
BarGraph Click Board
Introduce a ten-segment light bar display to user design with the BarGraph Click Board from mukroE. This compact accessory board employs a JSB-R102510Z red LED bar display as well as two 74HC595 shift registers. The 74HC595 chip incorporates an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register with 3-state output. For communication with the target board microcontroller, BarGraph Click uses the MikroBUS SPI (MOSI, MISO, SCK, CS), RST and PWM lines. It allows data to be passed serially from a microcontroller and thus saving I/O lines. The board comes set for 3.3V operation, but can be adapted for 5V use by repositioning an SMD jumper. It has a green LED diode that indicates the presence of power supply.
BarGraph Click is an ideal option to easily build a VU metre. It allows multiple boards to be connected close together and aligned to form longer LED stripe.
Barometer Click Board
The Barometer Click Board from MikroE is a high precision measurement add-on board that features the LPS25HB IC. The LPS25HB chip is a highly sensitive piezoresistive absolute pressure sensor that is capable of detecting as little as 0.01 hPa RMS in high resolution mode. The measurement range is from 260 to 1260 hPa with a 24-bit digital output. Barometer click can use either MikroBUS SPI or I2C communication interface, which is specified by soldering on-board jumpers in appropriate position. It also has a multifunctional interrupt pin that can be configured in either of the two ways: as Data Ready or as threshold trigger. Barometer click is designed to use a 3.3V power supply only.
This board is highly suitable for adding barometer or altimeter functionality to any design, for example, altitude measurement for wearables, weather station equipment, enhancing GPS functionality, etc.
Battery Boost Shield
Bring autonomous power supply and mobility to the MikroMedia board with the Battery Boost Shield. Designed to be pin-compatible with a range of MikroMMB boards, this expansion board features a MCP1640 step-up DC-DC regulator. This compact, high-efficiency converter provides easy-to-use power supply solution for battery powered devices, such as MikroMMB for PIC18FJ, PIC24, dsPIC33 and PIC32. The board provides autonomous power supply using two AAA batteries. The Battery Boost Shield has a MCP1640 IC that provides an output voltage 4V DC and output current ~300mA. The board features two battery holders, power ON/OF jumper and a convenient prototyping area which can be used for placing your additional components. The shield comes with two easy-to-use male-female 1x26 connectors. The pinout and shape of Battery Boost identically matches the pinout and shape of all the MikroMedia boards with a green PCB.
With these features, Battery Boost Shield is an ideal choice for personal medical products, wireless sensors, handheld instruments, GPS receivers, Bluetooth headsets, and products that use one-, two- and three- cell alkaline, NiCd, NiMH, one-cell Li-Ion or Li-Polymer batteries.
BattMan Click Board
The BATT-MAN Click Board is a very versatile battery operated power manager. When powered via mikroBUS, it will charge the connected Li-Ion/Li-Po 3.7V battery, while providing the output voltage on all its outputs at the same time. The interesting feature of this device is that it can provide additional current to the connected load if the current provided from the mikroBUS socket is not enough. This is possible by utilizing the connected battery and by employing intelligent power routing algorithms of BATT-MAN click.
Bee Click Board
A new add-on board for communication, the MikroE BEE Click Board employs the Microchip MRF24J40MA 2.4 GHz IEEE 802.15.4 radio transceiver module. MRF24J40MA module includes integrated crystal, internal voltage regulator, matching circuitry and PCB antenna. It operates in the 2.4 GHz frequency band and is FCC, IC and ETSI compliant. BEE click is an ideal solution for wireless networks, smart home and building automation, and other electronic applications that require wireless communication. The board is connected to the microcontroller through a SPI interface and is provided with a 3.3V power supply only. BEE click supports ZigBee, MiWi, MiWi P2P and proprietary wireless networking protocols with data rates of 250 kbps (IEEE 802.15.4) and 625 kbps (Turbo mode).
Bee PROTO Board
The Bee PROTO Board from MikroE is a high-performance, low-power solution to add wireless communication functionality through the ZigBee module. Compliant with the IEEE 802.15.4 standard, this additional board features ATZB-24-A2/B0 ZigBit wireless module with an innovative balanced dual-band chip antenna. Backed with top-quality radio performance and easy integration, the Bee PROTO Board operates in the high-sensitivity 2.4 GHz ISM frequency range. The embedded 802.15.4 / ZigBee software provides standard-based wireless connectivity for a wide range of applications. It communicates to the microcontroller through simple UART communication interface using TX and RX pins. Selectable by jumper, it uses a 3.3V or 5V operation.
Bee PROTO Board makes a great option for building automation & monitoring, automated meter reading, industrial and environmental monitoring, security, inventory management and more.
Bi Hall Click Board
The Bi Hall Click Board is a simple solution for adding a bipolar Hall switch to your design. It carries the Melexis US2882 bipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply transceiver.
BIG 7-SEG R Click Board
The BIG 7-SEG R Click Board is what you need if you want to add a seven-segment LED display to your project.