The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

Servo Click Board

Servo click is a 16-channel PWM servo driver with the voltage sensing circuitry. It can be used to simultaneously control 16 servo motors, each with its own programmable PWM signal. The frequency of the control PWM signal can be programmed in the range from 24 Hz to 1526 Hz, which is an ideal range for driving various types of servos. An accurate 16bit A/D converter is used to sample the voltage drop across the shunt resistor on each of the 16 channels, giving feedback on the servo current consumption. This way, Servo click is able to provide an information about the servo operation parameters, with no additional modifications of the servo itself.

MIKROE-3133

£30.00

Shake2Wake Click Board

Introduce shake functionality to the device with the Shake2Wake Click Board. The board features two chips from Analog Devices: an ADXL362 accelerometer that includes several activity detection modes, which is connected to an ADP195 power switch IC. This power switch IC is in turn connected to a screw terminal for controlling external devices. Upon shaking, the accelerometer sends an interrupt to the switch, which in turn, powers up the external components. The intensity and duration of shaking required for waking it up is programmable, as well as the period of inactivity, which leads to switching off the external device. Shake2Wake click can also function as a regular accelerometer, wherein the board uses the MikroBUS SPI interface for communication to the target microcontroller. This click board is designed to operate using a 3.3V power supply only. Shake2Wake click works on two main operating modes:.

MIKROE-1942

£46.80

SHT Click Board

The SHT Click Board is a temperature and humidity sensing click board that carries Sensiron??s SHT3x-DIS IC. Compared to its predecessor (SHT11), SHT3x click has increased reliability and enhanced signal processing features with a high signal-to-noise ratio.

MIKROE-2101

£31.20

SHT1X Board

The SHT1X Board features the SHT11 sensor. It is connected to a development board through a 2-wire serial interface, thus enabling you to measure temperature and humidity.

MIKROE-430

£26.80

SHT1x Click Board

Introduce digital humidity and temperature sensing capability to your device with the SHT11 Click Board. The board employs Sensirion.

MIKROE-949

£15.60

SHT1X PROTO Board

Add temperature and relative humidity measurement functionality to the device using the SHT1X PROTO Board. This add-on board includes a fully calibrated SHT11 digital humidity and temperature sensor IC, wherein a unique capacitive sensor element is used for evaluating relative humidity while temperature is measured by a band-gap sensor. All that the microcontroller has to do is read out the humidity and temperature values via the two-wire digital serial interface. The two-wire serial interface along with internal voltage regulation enables simple and quick system integration. The on-board connection pads with 0.1

MIKROE-431

£28.15

Shuttle Click Board

The Shuttle click is a mikroBUS socket expansion board, which provides an easy and elegant solution for stacking up to four click boards on a single mikroBUS. It is a perfect solution for expanding the capacity of the development system with additional mikroBUS sockets when there is a demand for using more click boards than the used development system is able to support.

Shuttle click can be especially interesting for the development systems that are equipped with a very small number of mikroBUS slots, such as the Clicker.

MIKROE-2880

£9.60

SigFox 2 Click Board

The SigFox 2 click is a device which carries the SN10-12, a fully integrated Sigfox™ certified module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band.

The SigFox 2 click comes with the subscription to the Sigfox network for a duration of one year from the moment of activation.
It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

Note: Sigfox 2 click is intended to be used in the RCZ2 (North America) and RCZ4 (Asia).

MIKROE-3039

£30.00

SigFox 3 Click Board

The SigFox 3 click is a device which carries the SN10-13, a fully integrated Sigfox™ certified module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band.

The SigFox click comes with the subscription to the Sigfox network for a duration of one year from the moment of activation.
It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

Note: Sigfox 3 click is intended to be used in the RCZ3 (Japan).

MIKROE-3163

£30.00

SigFox Click Board

The SigFox click is a device which carries the SN10-11, a fully integrated Sigfox™ certified module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band.

The SigFox click comes with the subscription to the Sigfox network for a duration of one year from the moment of activation.
It comes in the package which also includes the mikroSDK™ software and a library with all the functions. The Click board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board.

Note: Sigfox click is intended to be used in the RCZ1 (Europe region).

MIKROE-2534

£30.00

Signal Relay Click Board

The Signal Relay Click Board can be used for ON/OFF control in various devices. It carries four ultra-small GV5-1 PCB relays from Omron and runs on a 5V power supply.

Signal Relay click communicates with the target MCU over the following MikroBUS pins: AN, RST, CS and PWM.

MIKROE-2154

£34.80

SIM Card Holder Board

Now easily connect your prototype board with SIM Card using the SIM Card Holder Board by MikroElektronika. This breakout board is designed for a standard 6-pin SIM card socket. When a SIM card is placed into the holder, the user can gain access to the six pins of the SIM card through the standard 0.1"(2.54mm) spaced 6-pin output of the board. Compatible with standard breadboards, the clear labelling on-board provides easy identification of each output pin. This compact, cost-effective board can be used for rapid prototyping and development.

MIKROE-314

£15.30