The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.


The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

dsPICMCUcard4 empty PCB

NEW

dsPICMCUcard4 empty PCB

dsPICMCUcard4 empty PCB

MIKROE-228

$11.82

Easy24-33 v6 Development Board

NEW

Easy24-33 v6 Development Board

The Easy24-33 v6 Development System is a full-featured, general-purpose development board intended for programming and experimenting with PIC24 and dsPIC33 devices from Microchip. This development system features an on-board USB 2.0 programmer with mikroICD support that acts as an interface between the microcontroller and a PC.

The on-board LvPICFlash programmer can be used for external programming. It comes equipped with a wide range of peripheral modules, such as Touch Sense, Serial RAM, Serial EEPROM, Piezzo Buzzer and many more, which enable user to easily simulate the operation of the target device. The Easy24-33 v6 Development System comes with a PIC24F16KA102 microcontroller included in a 28-pin DIP socket. The board is provided with a 14-pin socket, an 18-pin socket, two 20-pin sockets, and three 28-pin sockets in order to install any of the 60 supported microcontrollers.

The Easy24-33 v6 board features a large prototyping area to design customized circuits right on the board. The onboard screw terminals and header pins enable access to power and I/Os. For power supply, the user can either go for a +5V PC power supply via the USB programming cable or use an external power supply source.

MIKROE-510

$150.87

Easy8051 v6 Development System

NEW

Easy8051 v6 Development System

Easy8051 v6 Development System is a new development tool for Atmel 8051 microcontrollers. Designed for designing and testing 8051 projects using the AT89 family of microcontrollers, this fully contained board includes a high-performance on-board USB 2.0 programmer that connects to the PC via USB cable. The on-board 16-bit I/O port expander MCP23S17 uses SPI communication. The Easy8051 v6 Development System comes with a range of integrated peripherals, such as a 128?

MIKROE-455

$150.87

Easy8051 v6 PROTO Board

NEW

Easy8051 v6 PROTO Board

Easy8051 v6 PROTO Board

MIKROE-463

$16.07

EasyADC Board

NEW

EasyADC Board

Convert an analog voltage signal into the appropriate 12-bit digital number using the EasyADC Board. The board features a MCP3204 12-bit Analog-to-Digital Converter (ADC) that is programmable to provide two pseudo-differential input pairs or four separate input channels. Designed for low-power consumption, EasyADC Board is compatible with all MikroElektronika

MIKROE-340

$31.62

EasyAVR v7 Development System

NEW

EasyAVR v7 Development System

EasyAVR v7 Development System

MIKROE-1385

$161.25

EasyBee Board

NEW

EasyBee Board

The EasyBee accessory board employs an Atmel ATZB-24-A2/B0 ZigBit module with dual-band chip antenna. Offered in a small footprint (13.5mm x 24mm), it comes with an impressive set of features. It offers simple wireless communication between a development system and a device. This 802.15.4 / ZigBee transceiver module, operating at 2.4 GHz, ensures exceptional radio performance and offers standard-based wireless connectivity for a wide range of applications. The EasyBee Board comes with a female IDC10 connector to plug it into a development system. It uses the serial UART interface for communication with the host microcontroller. The DIP switch enables the user to set which pins are used for RX/TX. On the side of the board, it has six connection pads that allow for direct access to UART pins RX, TX, RTS, and CTS. Capable of being used with a range of development systems, it is designed to operate using 3.3V or 5V power supply voltage.

The EasyBee Board is an ideal choice for building automation and monitoring, HVAC monitoring and control, inventory management, environmental monitoring, security, and many more.

MIKROE-290

$48.18

EasyBee3 Board

NEW

EasyBee3 Board

Introduce wireless communication functionality for short distances while keeping the power consumption low using the EasyBee3 Board. The board features an IEEE 802.15.4-compliant radio transceiver module MRF24J40MA that operates in the 2.4 GHz frequency band. It also comes with an integrated PCB antenna, crystal, internal voltage regulator, and matching circuitry. EasyBee3 Board communicates with the host microcontroller through a SPI interface. The DIP switches SW1 and SW2 on the additional board can be used for SPI communication. It is compatible with the Microchip

MIKROE-435

$36.81

EasyBluetooth Board

NEW

EasyBluetooth Board

The EasyBluetooth is an add-on board that is designed to integrate wireless capability to the device. Featuring onboard fully qualified RN41 Bluetooth 2.1/2.0/1.2/1.1 module, this accessory board operates on low power and high data rates. The RN41 module provides support for multiple internet protocols and enables simple integration. For communication with the host microcontroller, the board uses UART interface. The EasyBluetooth board features six specialized connection pads on the side of the board. These connection pads allow for easy connection to the USB-UART board and control it through a PC as a standalone Bluetooth device, which also eliminates the need to use the microcontroller. The board includes a female IDC10 connector to plug it into a development system.

The EasyBluetooth board can use both 3.3V and 5V power supply.

This high performance RN41 delivers up to a 3-Mbps data rate for distances up to 100 meters. It makes a highly economic alternative to add wireless ability to the device without spending substantial time and money in the development of Bluetooth-specific hardware and software.

MIKROE-641

$55.27

EasyBuzz Board

NEW

EasyBuzz Board

The EasyBuzz Board is an accessory board featuring a piezo buzzer capable of emitting audio signals. It is required to generate a voltage signal of specified frequency in order to operate the piezo buzzer normally. The onboard piezo speaker is capable of playing sound frequencies in the range between 20 Hz and 20 kHz. However, the resonant frequency of piezo speaker is 3.8 kHz and the best sound quality is achieved using frequencies between 2 kHz and 4 kHz. A DIP switch further aids in configuring board connections. The buzzer driver can be provided with a digital signal or a pulse-width modulated signal, where sound pitch is regulated by the PWM frequency, and sound volume can be adjusted by changing the PWM duty cycle. It has a female IDC10 connector. The EasyBuzz Board supports both 3.3V and 5V systems.

With such features, the Piezo Speaker add-on board is an ideal choice for adding audio signalization to any prototype device.

MIKROE-478

$16.07

EasyConnect Board

NEW

EasyConnect Board

The EasyConnect Board is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation. The EasyConnect Board has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika

MIKROE-128

$11.93

EasyConnect2 Board

NEW

EasyConnect2 Board

The EasyConnect2 Board is an accessory board that provides an easy access to the MCU pins via screw terminals. This additional board features on-board small screw-terminated connectors that can handle solid and stranded wires. These connectors enable eight wires to be easily connected or removed. Featuring modular configuration, it permits several wires to be connected or removed with one operation. The EasyConnect2 Board has a female IDC10 connector that provides easy way to connect the peripheral devices to the development system. This additional board is designed to operate in a wide range of power supply range (from 2.7V to 5V). Featuring compatible headers already installed on MikroElektronika

MIKROE-194

$11.93