MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
MOTION Click Board
Give your design the infrared motion detector functionality with the MOTION click. Designed to respond only to living bodies, this click board features PIR500B, a pyroelectric infrared radial sensor that generates a voltage when exposed to infrared light. It is connected to a BISS0001 motion sensor controller IC processes the signal and sends an interrupt to the host MCU via the mikroBUS INT (out) line. MOTION click also includes an onboard potentiometer that enable the user to adjust the detection range (up to 4 metres). Using the mikroBUS RST pin of the host microcontroller, the user can turn the potentiometer on/off by sending signals. The photo resistor aboard MOTION click that allows the user to set up the sensor to work only when it's dark. The night-only mode can be activated by using a jumper (zero-ohm resistor) below the photo resistor on the left side of the board. MOTION click is designed to support only a 3.3V power supply.
It is commonly used in human motion detector applications like burglar alarms, but the user can apply this concept to make lights switch ON as soon as someone enters the room, or restricting persons from entering a certain area.
Motion Sensor Board
Create interesting and compact devices to use in work and home using the Motion Sensor Board. This add-on board includes a passive infrared type movement sensor AMN11112, which detects changes in infrared spectrum when a person or object moves. This motion sensor features quad-type pyroelectric element, which makes it an ideal choice for small-movement detection applications. The sensor is protected with a plastic cap, which includes miniature lenses in order to boost sensor precision. In case some changes are detected in the infrared rays, the microcontroller
MP3 Click Board
The MP3 Click Board is an easy and compact accessory board that incorporates a versatile VS1053 stereo MP3 decoder chip. Designed to add MP3 feature, the VS1053 IC allows the user to decode all the commonly used formats (including the new AAC format). The formats include Ogg vorbis, MP3, MP1, MP2, MPEG4, WMA, FLAC, WAW, and MIDI. It also allows encoding of three different formats (Ogg vorbis, IMA ADPCM, 16-bit PCM) from microphone line in mono or stereo. MP3 click utilize the industry-standard SPI line for communication with the target board microcontroller. This click board also includes stereo headphone and microphone audio connectors. It is designed to use a 3.3V power supply only.
MP3 click is an easy-to-use, powerful workhorse for audio playback and recording applications, including MP3 players, audio signalization devices, voice recorders, and many more.
MPU 9DOF Click Board
The MPU 9DOF Click Board from mikroE is a measurement add-on board that includes MPU-9150 motion tracking mikroBUS module. Known to be the world
MPU IMU Click Board
MPU IMU click is a high-precision measurement add-on board designed to add motion tracking functionality to the design. With a tiny footprint, MPU IMU click features an InvenSense
Nano GPS Click Board
Designed for outstanding performance and sensitivity, Nano GPS click features the OriginGPS
NFC Tag Click Board
The NFC Tag Click Board is an accessory add-on board from MikroElektronika carrying an M24SR64 NFC/RFID tag IC with a dual interface. It is embedded with a highly-reliable 8KB EEPROM memory. The user can operate NFC Tag click in three different ways: via I2C interface, with a 13.56MHz RFID reader, and with an NFC-enabled smartphone, tablet, or similar device. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. The click board communicates with the target board microcontroller using mikroBUS I2C (SCL, SDA), INT and RST lines.
The NFC (Near Field Communications) Tag click features a PCB antenna that operates at a very close range (around 3cm), which makes it quiet secure as for developing mobile payment systems (some credit cards, Apple Pay, Google Wallet, etc.), or any short-range wireless data exchange. NFC Tag click is designed to use a 3.3V power supply only.
nRF C Click Board
Introduce a 2.4 GHz transceiver to your design with the nRF C Click Board! MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. The nRF C click carries a 2.4 GHz SMD chip antenna, which basically differentiates the click board from the other nRF clicks. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400
nRF S Click Board
Introduce a 2.4 GHz transceiver to your design with the nRF S click! After the launch of nRF T and nRF C, MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. It carries an SMA antenna connector, which basically differentiates the click board from the other two nRFs. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400
nRF T Click Board
Introduce a 2.4 GHz transceiver to your design with the nRF T Click Board! MikroElektronika has introduced a compact add-on board that incorporates the nRF24L01P 2.4 GHz transceiver module with an embedded baseband protocol engine. nRF T click carries an onboard PCB trace antenna, which basically differentiates the click board from the other two nRF clicks. The module supports air data rates of 250 Kbps, 1 Mbps and 2 Mbps, and is designed for operation in the world wide ISM frequency band at 2.400