MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
Reed Click Board
Introduce reed switch to the design using the Reed Click Board. The accessory board features a magnetically operated reed switch with two tiny strips of magnetic contacts of opposite polarities in a hermetically sealed glass envelope. One contact is a magnetic north pole, the other a south. The reed switch is a single-pole, single-throw switch that can be activated with a magnet or electromagnetic coil. By default, the two thin strips don
Relay 2 Click Board
The Relay 2 Click from mikroE is an add-on board designed for designs where the user wants to keep the microcontroller in an on and off relationship with two different devices at the same time, like lights, motors, and other similar devices.
The board comprises of two LCA717 OptoMOS solid state relays that provides fast, silent and bounce-free switching. It also has two screw terminals for secure connection. With a blocking voltage of 30V, both the relays have a high load current of 2A and very low maximum on-resistance of 0.15?
Relay Click Board
The Relay Click is a compact and easy to implement add-on board offered to include RELAY functionality to your design. The board is equipped with two G6D1AASI-5DC power PCB relays that control different devices with up to 5A, 250V AC/30V DC loads. A relay is an electromagnetic switch operated by a relatively small electric current with complete electrical isolation between control and controlled circuits. RELAY click board also features two screw terminals that ensure seamless connection. It also has two onboard LED indicators that indicates the presence of power supply. RELAY click communicates with the target board microcontroller through mikroBUS PWM (RL1) and CS (RL2) pins.
It is an ideal choice for turning on/off lights, motors and other high power systems within the maximum supported voltage/current level range.
RF Meter Click Board
The RF Meter click board comes designed to let the user measure as well as keep a check on the radio frequency levels. This radio frequency power measurement device contains a 12-bit MCP3201 ADC and AD8318 demodulating logarithmic detector. It covers a wide radio frequency range, which varies from 1 MHz to 8 GHz, with an accuracy of ??1.0 dB over 60 dB range (approximately) below 6 GHz. The board has been provided with an external antenna by way of which, it catches the signal. This signal is then forwarded to the AD8318 logarithmic amplifier for processing. The voltage produced here gets fed to the fed into an MCP3201 ADC so that RF levels can be precisely determined. The antenna connector, which is being provided to the RF Meter click board, is a standard SMA type and it is compatible with the GSM antennas.
Since, the AD8318 has a much wider frequency response; the user can put this board to use in a huge variety of applications by choosing the compatible antenna option.