MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
USB SPI Click Board
Introduce SPI serial communication using USB cable to the user design with the USB SPI Click Board. This add-on board comes with MCP2210 USB-to-SPI protocol converter with GPIO as well as USB MINI B connector. The MCP2210 chip contains 256 bytes user EEPROM, 128-byte buffer to handle data, and 9 general purpose I/O pins. The 12 MHz crystal oscillator aboard USB SPI click offers external clock waveform for MCP2210 IC. The board includes two LED diodes, wherein, the green LED diode denotes the presence of power supply and the other indicates the SPI traffic. Compact and easy to implement, USB SPI click is designed to communicate with the target board microcontroller through Serial Peripheral communication interface as a master device. The board is designed to operate on 3.3V or 5V power supply, selectable by the SMD jumper.
USB SPI click is an ideal choice to connect with SPI client devices directly from the computer, without the need for a microcontroller.
USB UART 2 Board
Enable USB connectivity for prototype devices that have a UART interface with the new USB UART 2 Board. The board employs a USB-to-UART serial converter MCP2200, which enables user to add communication to the prototype device in a very economical way. The board comes with integrated USB termination resistors, which reduces the number of external components in the prototype device. It also comes with a mini-USB connector that supports full-speed USB. The fast and easy USB UART 2 Board allows data transfer through UART communication interface. It is designed to operate using a 5V power supply only. This USB-UART solution is designed with a small footprint and compact design. It has connection pads for all available pins
USB UART Board
The USB UART Board is a prototype board that allows for connecting USB devices to the UART module built into a microcontroller. The board offers USB support with an integrated FT232R UART to USB serial converter that simplifies serial to USB designs while reducing the external component count. The board also includes an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal. It performs serial data transfer through UART communication. USB UART Board supports both 3.3V and 5V power supply. A jumper allows for selection of VCC output level.
With such features, USB UART Board is an ideal choice for RS232 communication with hardware modems, printers, barcode readers, wireless applications, and various devices that use UART communication protocol.
USB UART Click Board
A compact and convenient solution to introduce serial UART communication via USB cable
UV Click Board
Introduce an ultraviolet light sensor to the design with the UV click! The UV click features an easy-to-use ML8511 IC UV sensor that is designed to warn the user of excessive ultraviolet radiation levels and outputs either analog or digital signals that is linearly proportional to the UV intensity it detects. It also features an onboard MCP3201 ADC, which converts the signal, however, one can bypass it and get an analog output by soldering the A/D SEL jumper in the AN position. ML8511 IC UV sensor is sensitive to UV-A (95 percent of Ultraviolet light) and UV-B rays (the one causing sunburns).
UV click makes an ideal choice for making devices that notify the user of sunburn or identify the UV index as it relates to weather conditions. It also finds great use in mobile computing devices, such as, a smart phone, a mobile phone, and a watch, at low power and a compact package (QFN).
UV click communicates with the target board through mikroBUS SPI (CS, SCK, MISO) or AN lines. It is designed to use a 3.3V power supply only.
VOLT - Smart USB Li-Po battery charger
VOLT - Smart USB Li-Po battery charger makes it possible for the users to charge the battery of their devices over a USB connector. This intelligently designed Lithium-Polymer battery charger serves as a reliable power source for devices that are constantly hungry for more battery backup or USB power supply. The ability of the VOLT - Smart USB Li-Po battery charger to charge the battery over USB connector is attributable to its in-built MCP73832 linear charge power management circuitry. This power management controller limits the charge current based on die temperature during high power or high ambient conditions.
This thermal regulation optimizes the charge cycle time and thus makes this lithium-ion polymer battery charger a dependable and safe charger for user