MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.
The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.
MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.
UV Click Board
Introduce an ultraviolet light sensor to the design with the UV click! The UV click features an easy-to-use ML8511 IC UV sensor that is designed to warn the user of excessive ultraviolet radiation levels and outputs either analog or digital signals that is linearly proportional to the UV intensity it detects. It also features an onboard MCP3201 ADC, which converts the signal, however, one can bypass it and get an analog output by soldering the A/D SEL jumper in the AN position. ML8511 IC UV sensor is sensitive to UV-A (95 percent of Ultraviolet light) and UV-B rays (the one causing sunburns).
UV click makes an ideal choice for making devices that notify the user of sunburn or identify the UV index as it relates to weather conditions. It also finds great use in mobile computing devices, such as, a smart phone, a mobile phone, and a watch, at low power and a compact package (QFN).
UV click communicates with the target board through mikroBUS SPI (CS, SCK, MISO) or AN lines. It is designed to use a 3.3V power supply only.
VOLT - Smart USB Li-Po battery charger
VOLT - Smart USB Li-Po battery charger makes it possible for the users to charge the battery of their devices over a USB connector. This intelligently designed Lithium-Polymer battery charger serves as a reliable power source for devices that are constantly hungry for more battery backup or USB power supply. The ability of the VOLT - Smart USB Li-Po battery charger to charge the battery over USB connector is attributable to its in-built MCP73832 linear charge power management circuitry. This power management controller limits the charge current based on die temperature during high power or high ambient conditions.
This thermal regulation optimizes the charge cycle time and thus makes this lithium-ion polymer battery charger a dependable and safe charger for user
WiFi - PROTO Board
Add wireless functionality between a microcontroller and a remote device using the mikroE WiFi-PROTO Board. Offered with a compact footprint, this communication board acts as a high performance, low power MRF24WB0MA Wi-Fi radio transceiver module with serialized unique MAC address. It is compliant with IEEE 802.11 standards. The WiFi-PROTO Board is connected to a microcontroller through a proto board that is connected to the I/O port of the development system. This accessory board uses the 4-wire SPI interface for communication with the microcontroller. Additional on-board JTAG and UART modules are provides for testing purposes. The WiFi - PROTO Board also features an integrated PCB antenna and supports Wi-Fi with the free TCP/IP protocol stack. It uses a 3.3V power supply only.
The WiFi-PROTO Board is an ideal choice for low-power, low data-rate Wi-Fi sensor networks, home automation, industrial controls, retail, and medical, fitness and healthcare devices.
WiFi 2 Click Board
MikroElektronika has introduced its third click with a WiFi module, named as WiFi2 click, which is allegedly to be the most affordable WiFi click board yet. Designed to easily adding WiFi functionality to your device, this click board features HLK-M30 WiFi module with built-in WEP64/WEP128/TKIP/AES, WEP/WPA-PSK/WPA2-PSK authentication. It also has a built-in TCP/IP protocol stack. Along with that, it also supports a few additional network protocols, including TCP/UCP and DHCP/DNS.
Ideal for IoT applications, WiFi2 click is easily configurable and can be set up with either a static or dynamic IP address, which makes it suitable for applications, like home automation, telemetry, remote control, industrial systems, etc. It communicates with the target board microcontroller through mikroBUS UART (TX, RX), RST, and AN lines. WiFi2 click board is designed to use a 3.3V power supply. A red LED indicates WiFi activity. The board is equipped with a PCB trace antenna that is designed for the 2400
WiFi 3 Click Board
The WiFi3 Click Board from mikroE is a powerful communication add-on board with the ES8266 module that provides the easiest way to connect your devices to the internet. This WiFi module makes an ideal addition to a click board collection if the user wants to venture into IoT. WiFi3 click features a combination of ESP8266 module with a system on chip.
The module further includes an integrated TCP/IP stack and supports WiFi Direct (p2p). The System on Chip (SoC) offers powerful on-board processing and storage capabilities for a WiFi module and offloads all networking functions from the microcontroller. Other than the standard mikroBUS socket, WiFi3 click includes 6 additional GPIO pins for user to connect and control external electronics. It also features a PCB trace antenna that works for the 2400-2483.5 MHz frequency band. WiFi3 click is designed to use a 3.3V power supply only.
Connect anything from a simple LED, data logger, or some type of sensor or switch in a smarthome using this complete self-contained WiFi solution!
WiFi 4 Click Board
Now easily integrate WiFi communication to your existing or new device with the WiFi 4 Click Board! This simple and compact click board features an intelligent WiFi module, called SPWF01SA, with a single-chip 802.11 b/g/n transceiver. The chip is also integrated with a STM32 32-bit microcontroller and a built-in micro 2.4 GHz ISM band antenna. WiFi 4 click also includes an integrated fully-featured TCP/IP protocol stack with added web server and additional application service capabilities. The onboard module is provided with 1.5 MB of integrated flash memory and 64 KB of RAM. WiFi 4 click uses the mikroBUS UART interface to communicate with the target board microcontroller. It also features 14 additional GPIO pins.
It is designed to use a 3.3V power supply only. WiFi 4 click is ideal for connecting equipment to the Internet, creating smart appliances, wireless data loggers, home automation, etc.