The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

more...
Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.


The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.

Products

Buggy + clicker 2 for STM32 + Bluetooth click

NEW

Buggy + clicker 2 for STM32 + Bluetooth click

Buggy + clicker 2 for STM32 + Bluetooth click

MIKROE-1771

$175.61

Button G Click Board

NEW

Button G Click Board

Add a simple pushbutton functionality to your design with the Button G click. While the user has a freedom to choose from a range of onscreen user interfaces, the tactile feedback from pushing a physical button is hard to replace. The user can set it up depending on the device/design requirement. Any application that user a user-interface design and requires the tactile feel and feedback of a hardware pushbutton, Button G click seems to be an ideal choice. On press, the button is designed to send an interrupt signal to the target board microcontroller. The initial

MIKROE-2040

$16.92

Button R Click Board

NEW

Button R Click Board

Add a simple pushbutton functionality to your design with the Button R Click Board from mikroE. While the user has a freedom to choose from a range of onscreen user interfaces, the tactile feedback from pushing a physical button is hard to replace. The user can set it up depending on the device/design requirement. Any application that user a user-interface design and requires the tactile feel and feedback of a hardware pushbutton, Button R click seems to be an ideal choice. On press, the button is designed to send an interrupt signal to the target board microcontroller. The initial

MIKROE-1901

$16.92

Buzz Click Board

NEW

Buzz Click Board

Add sound function to the device in the form of beeps, tones and alerts using the Buzz Click Board. This audio and voice board employs a premium piezo speaker that produces audio signals. This compact round speaker allows the user to create simple audio sounds or voice messages into portable devices. The piezo speaker/buzzer is designed for best performance with a resonant frequency of 3.8 kHz. The Buzz click also features an integrated buzzer driver is connected to either the digital (CS/GPI) or the PWM line. Either of these pins can be used to provide the signal from the MCU to the buzzer driver. This click board is designed to operate using a 5V power supply. The user can solder an SMD jumper to the 3.3V position, when required. It has onboard power LED that denotes the power status.

Buzz click is an ideal choice for introducing audio signalization functionality to any user device.

MIKROE-945

$15.98

Camera Click Board

NEW

Camera Click Board

Camera click is a popular add-on board that allows user to see the world through the eye of an OV767-VL2A low voltage CMOS image sensor. The sensor is connected to an onboard FT900 MCU via a parallel camera interface, which in turn, outputs the camera image to the target board through the mikroBUS SPI interface (CS, SCK, MISO, MOSI). The camera

MIKROE-1816

$46.92

CAN SPI 3.3V Click Board

NEW

CAN SPI 3.3V Click Board

The mikroE CAN SPI 3.3V Click Board is known to be the best accessory board designed to add CAN (Controller Area Network) connectivity to the microcontroller with SPI interface. The 3.3V version is exclusively designed for serial communication on 3.3V microcontrollers. The communication board features a high-speed SN65HVD230 CAN transceiver that serves as the interface between a CAN protocol controller and the physical bus. It provides a CAN serial communication physical layer in accordance with the ISO 11898 standard. CAN SPI click

MIKROE-986

$28.35

CAN SPI 5V Click Board

NEW

CAN SPI 5V Click Board

The CAN SPI 5V Click Board is a highly reliable communication board intended to add serial CAN connectivity to user microcontroller with SPI interface. The 5V version is exclusively designed for communication on 5V microcontrollers. The accessory click board features MCP2551, high-speed CAN transceiver that serves as the interface between a CAN protocol controller and the physical bus. The CAN transceiver circuit provides a CAN serial communication physical layer in accordance with the ISO 11898 standard. The board has screw terminals to ensure easy and secure connectivity, power LED, and node termination jumper. It supports connection with up to 112 nodes. Designed to operate in especially-harsh environments, CAN SPI click 5V provides cross-wire protection, loss-of-ground and over-voltage protection, over-temperature protection, as well as wide common-mode range. It uses a 5V power supply only.

CAN SPI click 5V is an ideal choice for industrial automation, home automation, as well as in automotive and mobile machine industry.

Note: To add CAN SPI function to a 3.3V system, see the CAN SPI Click 3.3V board.

MIKROE-988

$28.35

CAN-1 Board

NEW

CAN-1 Board

The CAN-1 board is an accessory board that allows user to add CAN (Controller Area Network) connectivity to the design. Developed with integrated CAN support, the board features a high-speed MCP2551 CAN transceiver that works as the interface between a CAN protocol controller and the physical bus. It operates at speeds of up to 1 Mb/s and is suitable for 12V and 24V systems. The CAN-1 Board implements ISO-11898 standard physical layer requirements. It allows up to 112 nodes to be connected. The board can be connected into a development system via a female IDC10 connector. The DIP switch facilitates the user to choose which pins are used for RX/TX. The CAN-1 board is designed to operate using a 5V power supply only. When connecting to a 3.3V development system, careful use of voltage translators is advisable.

The CAN-1 board is an ideal option for industrial automation, home automation, automotive and mobile machine industry, and many more.

MIKROE-67

$25.27

CANSPI Board

NEW

CANSPI Board

The CANSPI is an easy to use, compact accessory board that allows user to connect a CAN (Controller Area Network) bus to any microcontroller with Serial Peripheral Interface (SPI). The board employs both an MCP2515 CAN controller and an MCP2551 CAN transceiver. The MCP2515 circuit used as a CAN controller allows for data exchange with microcontrollers using a standard SPI communication interface. On the other hand, the transceiver MCP2551 chip provides necessary signal adjustments and allows the signals to be sent/received at a 1 Mb/s. The CANSPI board allows for transmitting and receiving both standard and extended data and remote frames.

It makes an ideal option for users looking to connect CAN to a microcontroller without integrated CAN support. Applications like, industrial automation, home automation as well as automotive and mobile machine industry are well-suited for CAN-SPI board.

MIKROE-68

$28.35

CapSense Click Board

NEW

CapSense Click Board

Introduce capacitive sensing elements to the design with CapSense click! This compact add-on board incorporates a CY8C201A0 capacitive controller and capacitive sensing elements. The CY8C201A0 capacitive sensing module works by taking human body capacitance as an input and directly provides the real time sensor information. The capacitive sensing elements include: a 5-segment slider and two buttons, for touch interfacing. This capacitive sensing board also contains two LEDS inside each button for backlighting. The LED diode (Green) indicates the power supply status. CapSense click is configured through an I2C port and communicates with the target board MCU through mikroBUS I2C (SDA, SCL), AN, and RST lines. The CY8C201A0 IC features high immunity against radiated and conductive noise. Featuring industry

MIKROE-1446

$23.20

CC3000 Click Board

NEW

CC3000 Click Board

CC3000 Click Board

MIKROE-1527

$44.24

ccRF Click Board

NEW

ccRF Click Board

The ccRF Click Board from mikroEis an add-on communication board that employs a CC2500 low-power 2.4 GHz RF module, meant for the 2400-2483.5 MHz ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band. The 2.4 GHz RF transceiver, designed for low-power wireless apps, is incorporated with a highly configurable baseband modem that supports several modulation formats. The board also features a PCB trace antenna. Intended for high sensitivity and low current consumption, CC2500 module has a programmable data rate from 1.2 to 500 kBaud. The maximum device range is up to 20 metres in open space. The ccRF click make use of the mikroBUS SPI (MOSI, MISO, SCK, CS), RST and PWM lines to communicate with the target board microcontroller. The board is designed to support a 3.3V power supply only. It has a green LED power indicator.

The ccRF click is an ideal choice for consumer electronics, wireless audio, wireless game controllers, wireless keyboard and mouse, RF enabled remote controls and many more.

MIKROE-1435

$29.38