MikroMedia for PSoC 5LP
The 32-bit CY8C5868AXI-LP035 ARM Cortex-M3 microcontroller comes with integrated analog and digital modules which can be used in combination with other on-board modules. This high-performance microcontroller has a new 2 Mbit FRAM (FM25H20) memory chip, which can expand the microcontroller's data memory. It comes pre-programmed with a HID USB bootloader. It operates at 67 MHz, and has 256 KB of Flash memory and 64 KB of RAM.
Power Supply Options
The mikromedia for PSoC 5LP can be powered in two ways: either use the MINI-B USB cable or use a Li-Polymer battery via on-board battery connector. While the Power LED (GREEN) denotes the presence of power supply, the LED diode (RED) denotes when the battery is charging.
Programming the Microcontroller
The microcontroller can be programmed in two ways: Over USB HID PSoC bootloader, or using mikroProg for PSoC 5LP or other external programmers. In case of PSoC bootloader, the user can transfer the bootloader file from PC to MCU using PSoC Programmer and PSoC Creator. Additionally, the microcontroller can be programmed with the mikroProg for PSoC 5LP programmer, PSoC programmer software and PSoC Creator software.
- mikromedia for PSoC 5LP board with touchscreen LCD (1)
- 26-pin header strips for installation on the expansion header pads (2)
- 2×5-pin header for installation on the mikroProg pads (2)
- USB Cable (1)
- Printed Documentation
If you've already bought this product, please sign in and add your own review!