mikroProg to ST-Link v2 adapter
The MikroProg to ST-Link v2 is an adapter board that enables the user to connect MikroProg for STM32 programmer and hardware debugger to the male JTAG connector on the target board. Based on ST-LINK v2, MikroProg for STM32 is a fast in-system programmer and hardware debugger. Backed with outstanding performance and easy operation, the multi-adapter board employs one 2x5 male header and a 2x10 female socket. The MikroProg to ST-Link v2 adapter should be first placed on 2x10 male header on the target board, and after that the MikroProg should be plugged into the adapter.
- Connects the MikroProg JTAG Programmer to a standard 20-pin ARM header
- Features one 2x10 male header and a 2x10 female socket
- Compact design, small footprint
- Clear markings on board
- Affordable price
- RoHS compliant
The mikroProg to ST-Link v2 adapter allows you to connect mikroProg for STM32 programmer and hardware debugger to 20-pin male JTAG connector on your target board. The Adapter consists of one 2x10 male header and a 2x10 female socket. It’s recommended to first place the adapter on 2x10 male header on the target board, and then plug in the mikroProg? into the adapter’s 2x5 male header. .
- MikroProg to ST-Link v2 adapter (1)