New arrivals

Products: 116 of 30
  • TC2030-NL-FTDI-TTL-232RG USB to TC2030 No Legs Serial Cable

    This product is FTDI’s TTL to USB Serial Converter cable fitted with a TC2030-NL “No Legs” Tag-Connector.
    Possible versions include TC2030-NL “no legs” Tag-Connectors fitted to one of the following FTDI TTL-232RG to Serial Converter Cables:

    • TTL-232RG-VSW3V3
    • TTL-232RG-VSW5V
    • TTL-232RG-VREG1V8
    • TTL-232RG-VREG3V3
    • TTL-232RG-VIP (this item)

    This item is suitable for 3.3V Logic.

    Nominal cable length: 5.9ft/1.8m.

    See also the legged version TC2030-FTDI-TTL-232RG and the other interface types TC2030-NL-FTDI-TTL-232R, TC2030-NL-FTDI-TTL-C232HD & TC2030-NL-FTDI-TTL-234X.

    Not rated yet
    • $117.78
    Out of stock
  • TC2030-NL-FTDI-TTL-232RG USB to TC2030 No Legs Serial Cable

    This product is FTDI’s TTL to USB Serial Converter cable fitted with a TC2030-NL “No Legs” Tag-Connector.
    Possible versions include TC2030-NL “no legs” Tag-Connectors fitted to one of the following FTDI TTL-232RG to Serial Converter Cables:

    • TTL-232RG-VSW3V3
    • TTL-232RG-VSW5V
    • TTL-232RG-VREG1V8
    • TTL-232RG-VREG3V3 (this item)
    • TTL-232RG-VIP

    This item is suitable for 3.3V Logic.

    Nominal cable length: 5.9ft/1.8m.

    See also the legged version TC2030-FTDI-TTL-232RG and the other interface types TC2030-NL-FTDI-TTL-232R, TC2030-NL-FTDI-TTL-C232HD & TC2030-NL-FTDI-TTL-234X.

    Not rated yet
    • $117.78
    Out of stock
  • TC2030-NL-FTDI-TTL-232RG USB to TC2030 No Legs Serial Cable

    This product is FTDI’s TTL to USB Serial Converter cable fitted with a TC2030-NL “No Legs” Tag-Connector.
    Possible versions include TC2030-NL “no legs” Tag-Connectors fitted to one of the following FTDI TTL-232RG to Serial Converter Cables:

    • TTL-232RG-VSW3V3
    • TTL-232RG-VSW5V (this item)
    • TTL-232RG-VREG1V8
    • TTL-232RG-VREG3V3
    • TTL-232RG-VIP

    This item is suitable for 3.3V Logic.

    Nominal cable length: 5.9ft/1.8m.

    See also the legged version TC2030-FTDI-TTL-232RG and the other interface types TC2030-NL-FTDI-TTL-232R, TC2030-NL-FTDI-TTL-C232HD & TC2030-NL-FTDI-TTL-234X.

    Not rated yet
    • $117.78
    Out of stock
  • TC2030-NL-FTDI-TTL-232RG USB to TC2030 No Legs Serial Cable

    This product is FTDI’s TTL to USB Serial Converter cable fitted with a TC2030-NL “No Legs” Tag-Connector.
    Possible versions include TC2030-NL “no legs” Tag-Connectors fitted to one of the following FTDI TTL-232RG to Serial Converter Cables:

    • TTL-232RG-VSW3V3 (this item)
    • TTL-232RG-VSW5V
    • TTL-232RG-VREG1V8
    • TTL-232RG-VREG3V3
    • TTL-232RG-VIP

    This item is suitable for 3.3V Logic.

    Nominal cable length: 5.9ft/1.8m.

    See also the legged version TC2030-FTDI-TTL-232RG and the other interface types TC2030-NL-FTDI-TTL-232R, TC2030-NL-FTDI-TTL-C232HD & TC2030-NL-FTDI-TTL-234X.

    Not rated yet
    • $117.78
    Out of stock
  • TC2030-NL-FTDI-TTL-232RG USB to TC2030 No Legs Serial Cable

    This product is FTDI’s TTL to USB Serial Converter cable fitted with a TC2030-NL “No Legs” Tag-Connector.
    Possible versions include TC2030-NL “no legs” Tag-Connectors fitted to one of the following FTDI TTL-232RG to Serial Converter Cables:

    • TTL-232RG-VSW3V3
    • TTL-232RG-VSW5V
    • TTL-232RG-VREG1V8
    • TTL-232RG-VREG3V3
    • TTL-232RG-VIP

    Nominal cable length: 5.9ft/1.8m.

    Please specify the version you need when ordering.

    See also the legged version TC2030-FTDI-TTL-232RG and the other interface types TC2030-NL-FTDI-TTL-232RTC2030-NL-FTDI-TTL-C232HD & TC2030-NL-FTDI-TTL-234X.

    Not rated yet
    • $117.78
    Only 5 left in stock.
  • UART MUX 2 Click Board™

    The UART MUX 2 Click Board™ is a compact add-on board that enables pseudo-multidrop RS232 transmission. This board features the MAX399, a precise CMOS analogue multiplexer that allows four remote RS-232 transceivers to share a single UART from Maxim Integrated. It offers fast switching speeds with a transition time of less than 250ns and low on-resistance less than 100Ω while retains CMOS-logic input compatibility and fast switching. Channel selection is performed through a set of specific GPIO pins and possesses additional functionality such as the manual ON/OFF feature. This Click board™ is suitable for a wide range of applications, from industrial and instrumentation to a consumer, communications, data-acquisition systems, and many more.

    UART MUX 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $33.95
    Only 1 left in stock. Out of Stock, will be back ordered
  • AMR Angle Click Board™

    The AMR Angle Click Board™ is a compact add-on board containing an anisotropic magnetoresistive measurement solution ideal for either angle or linear position measurements. This board features the ADA4571, an AMR sensor with clean and amplified cosine and sine output signals related to a rotating magnetic field angle from Analog Devices. It can provide better than 0.2° angular accuracy over 180°, and linear accuracy of 2mil (0.002 inches) over a 0.5-inch range, depending on the size of the used magnet. This Click board™ is suitable for absolute position measurement (linear and angle), contactless angular measurement and detection, magnetic angular position sensing, actuator control and positioning, and more.

    AMR Angle Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $27.02
    Only 1 left in stock. Out of Stock, will be back ordered
  • Power MUX 2 Click Board™

    The Power MUX 2 Click Board™ is a compact add-on board that contains a highly configurable power mux. This board features the TPS2120, a dual-input single-output power multiplexer with an automatic switchover feature from Texas Instruments. This Click board™ prioritizes the main supply when present and quickly switches to auxiliary supply when the main supply drops. During switchover, the voltage drop is controlled to block reverse current before it happens and provide uninterrupted power to the load with minimal hold-up capacitance. This Click board™ is suitable for applications as a backup and standby power, input source selection, and various systems having multiple power sources.

    Power MUX 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $19.40
    Only 1 left in stock. Out of Stock, will be back ordered
  • MCU Card For PIC PIC18F96J94

    The MCU Card For PIC PIC18F96J94 is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product. 

    Not rated yet
    • $44.34
    Only 1 left in stock. Out of Stock, will be back ordered
  • Pi 4 Click Board™ Shield

    Start your project development with our Pi 4 Click Shield fast and easy. The Raspberry Pi 4 Model B, combined with the mikroBUS™ and Shuttle socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number of applications with one host board.

    Not rated yet
    • $26.33
    Only 5 left in stock. Out of Stock, will be back ordered
  • EasyPIC V8 for dsPIC30 Development System

    The EasyPIC v8 for dsPIC30 is a development board designed for the rapid development of embedded applications based on Microchip's 16-bit dsPIC30 microcontrollers (MCUs). It offers a set of standard features, as well as some new and unique features, typical for the 8th generation of development boards: CODEGRIP - programming and debugging over the WiFi network, the connectivity provided by new, improved USB-C connectors, support for a wide range of different MCUs, and more.

    The development board is designed to have everything that you might need for the application development: a highly advanced programmer/debugger module, a reliable power supply module, a massive set of connectivity options including USB to UART, CAN, LIN, etc.

    Not rated yet
    • $287.51
    Only 1 left in stock.
  • mikroC AI for dsPIC (Perpetual Licence)

    Teams of designers and developers can now share the same project across different platforms keeping the same look and feel.

    MikroC AI for dsPIC includes NECTO Studio.  The Perpectual licence includes maintenance and access to updates and new versions for the first 12 months.  This can be extended for just 20% per annum.

    NECTO studio is fully functional on Windows, Mac OS, and Linux. We can proudly say that this is the first MCU vendor-independent IDE on the market for embedded development on Mac OS.

    Not rated yet
    • $264.65
  • Magic RFID Click Board™

     Magic RFID Click Board™ is a compact add-on board that contains an embedded RFID module. This board features the M6E-NANO, UHF RFID module with ultra-low power consumption from JADAK. Supporting the EPC Gen2V2 and ISO 18000-63 standard, the M6E-NANO module is available for global use. It operates in the Ultra High Frequency (UHF) band in a range from 859 up to 930MHz and can be used for write/read applications. This module provides an output power of +27 dBm, adjustable in 0.01 dB steps with a read speed of 200 tags/sec and a read range of up to 4.5m. This Click board™ is ideal for a wide range of applications in the logistics, security access points, manufacturing, tag commissioning stations, and more.

    Magic RFID Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $259.80
    Out of Stock, will be back ordered
  • EasyPIC v7a Development Board

    The EasyPIC v7a is an enhanced version of the well-known EasyPIC v7 development board for PIC MCUs.

    It has been upgraded to include the new CODEGRIP debugger and Programmer, which offers a new, fast USB Type C interface

    The EasyPIC supports 3.3V and 5V microcontrollers in the familiar DIP package

    Not rated yet
    • $178.74
    Only 3 left in stock. Out of Stock, will be back ordered
  • CODEGRIP for PIC

    CODEGRIP for PIC Universal programmer and debugger for PIC, dsPIC and PIC32 over USB-C and WiFi.

     Includes the new CODEGRIP Suite application for interface configuration and device programming.

    Wireless connectivity and USB-C connector allow seamless and effortless programming of over 1600 types of PIC microcontrollers, providing users with both mobility and complete control over the microcontroller programming and debugging process.

    Not rated yet
    • $108.08
    Only 3 left in stock.
  • DAQ 3 Click Board™

    The DAQ 3 Click Board™ is a compact add-on board representing a precision data acquisition solution. This board features the LTC6373 programmable gain instrumentation amplifier driving ADAQ4003, fast and precise μModule precision data acquisition (DAQ) signal chain combined with power solution from Analog Devices. Using SIP technology, the ADAQ4003 reduces end system component count by combining multiple standard signal processing and conditioning blocks into a single device. These blocks include a high-resolution 18-bit, 2 MSPS successive approximation register ADC, fully differential ADC driver amplifier, and a stable reference buffer along with selectable gain options and the most critical passive components. The ADAQ4003 also incorporates ADI’s proprietary iPassives® precision-matched resistor array that minimizes time and temperature-dependent errors, simplifying system-level calibration. This Click board™ is suitable for process control and machine automation applications, as automatic test equipment, digital control loops, and more.

    DAQ 3 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $95.61
    Out of Stock, will be back ordered
Products: 116 of 30
* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.