The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

Plug-In Cables

Plug-In Cables


Products

10-pin Legged Pogo Head to USB 2.0 Type A Cable

The TC2050-PGUSB cable has a 10-pin Tag-Connect Plug-of-Nails "Legged" Connector on one end and connects to a USB 2.0 cable with type A connector as well as having a 6-pin (2x3) 0.1" ribbon header.

Note: This cable does not have any USB functionality, but it uses a USB 2.0 type A connector

TC2050-PGUSB

5 in stock

£63.00

(from 1 to 5)

Tag Connect TC2030-CTX Cable

The Tag-Connect TC2030-CTX plug-in cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex Debug Connector used by debuggers such as Keil's ULINK-2.

TC2030-CTX

25 in stock

£51.00

(from 1 to 25)

Tag Connect TC2030-CTX-20 Cable

The Tag-Connect TC2030-CTX-20 plug-in cable has a 6-pin TC2030 Tag-Connector and a 20-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex Debug Connector used by debuggers such as Keil's ULINK-2.

TC2030-CTX-20

23 in stock

£62.70

(from 1 to 23)

Tag Connect TC2030-CTX-STDC14 for STLink v3

6-Pin Legged TC2030 Plug-of-Nails™ programming cable for use with STM32 processors with STLINK-V3 and STLINK-V3MINI.
Note: This STDC14 cable was previously known as TC2030-CTX-ST14.


This special cable has a 6-pin TC2030 Tag-Connector and a 14-pin ribbon connector that mates with the STDC14 (FTSH-107) style micro-header found on the STLINK-V3 and STLINK-V3MINI providing the signals necessary for the SWD protocol on the STM32 MCU including SWO.


See also the TC2030-CTX-NL-STDC14 “No Legs” version of the cable with footprint that saves over 66% of the board space needed by typical FTSH-107 style micro headers!

TC2030-CTX-STDC14

2 in stock

£51.00

(from 1 to 2)

Tag Connect TC2030-IDC Cable

The Tag Connect TC2030-IDC 6-Pin, 6" legged cable with Ribbon connector.

TC2030-IDC

38 in stock

£56.10

(from 1 to 38)

Tag Connect TC2030-IDC-10 Cable

The Tag Connect TC2030-IDC-10 6-Pin, 10" legged cable with Ribbon connector.

TC2030-IDC-10

26 in stock

£58.20

(from 1 to 26)

Tag Connect TC2030-MCP Cable

The Tag Connect TC2030-MCP cable is 152mm (6") long; offering the greatest flexibility for hard to reach boards. However, for fast interfaces the shortest cable length is recommended and this should be borne in mind as long cables may prove to be unreliable in a few cases".

TC2030-MCP

9 in stock

£42.35

£38.40 (save 9%)

(from 1 to 9)

Tag Connect TC2030-MCP-10 Cable

The Tag Connect TC2030-MCP-10 cable is 254mm (10") long; offering the greatest flexibility for hard to reach boards. However, for fast interfaces the shortest cable length is recommended and this should be borne in mind as long cables may prove to be unreliable in a few cases".

TC2030-MCP-10

18 in stock

£58.20

(from 1 to 18)

Tag Connect TC2050-IDC Cable

The Tag Connect TC2050-IDC-10-Pin legged cable with Ribbon connector.

TC2050-IDC

35 in stock

£56.10

(from 1 to 35)

Tag Connect TC2050-IDC-430 Cable

The Tag Connect TC2050-IDC-430 legged cable for use with MSP430 / FET430.

TC2050-IDC-430

25 in stock

£56.10

(from 1 to 25)

Tag Connect TC2050-MINIHDMI Cable

The Tag Connect TC2050-MINIHDMI is a 10-pin Plug of Nails Cable for use with Altium's cross platform USB JTag unit.

TC2050-MINIHDMI

2 in stock

£58.20

(from 1 to 2)

Tag Connect TC2070-IDC Cable

The Tag Connect TC2070-IDC-14-Pin legged cable with Ribbon connector.

TC2070-IDC

£58.20

Out of stock, you can preorder