DSO-8060L Multifunction Hand-held Oscilloscope
The Hantek DSO-8060L is a dual-channel, 60MHz hand-held oscilloscope, digital multimeter and waveform generator with built in colour LCD and Ethernet interface.
HT18A Large Dolphin/ Alligator Clips
The Hantek HT18A is a pair of large, heavy-duty dolphin/ alligator Clips, ideal for connecting onto large cables or terminals; fitted with 4mm socket.
HT19 Multimeter Probes
The Hantek HT19 are a pair of replacement multimeter probes for use with Test leads with a 4mm plug.
HT201 20:1 Attenuator
The Hantek HT201 20:1 attenuator to be used with oscilloscopes to reduce the input voltage.
HT25 Auto Ignition Probe
The Hantek HT25 is a specialist oscilloscope probe for monitoring signals in auto ignition leads.
HT301 Auto Breakout Leads
The Hantek HT301 breakout leads for connecting to automotive sensor signals. Simply taps into wiring harness leads.
HT306-06 0.6mm 6-way Breakout Leads
The Hantek HT306-06 is a set of 0.6mm 6-way universal breakout Leads To attach to automotive connectors.Also available in 1.5, 2.3 and 2.8mm sizes.
HT306-15 1.5mm 6-way Breakout Leads
The Hantek HT306-06 is a set of 1.5mm 6-way universal breakout Leads To attach to automotive connectors.Also available in 0.6, 2.3 and 2.8mm sizes.
HT306-23 2.3mm 6-way Breakout Leads
The Hantek HT306-23 is a set of 2.3mm 6-way universal breakout Leads to attach to automotive connectors.Also available in 0.6, 1.5, and 2.8mm sizes.
HT306-28 2.8mm 6-way Breakout Leads
The Hantek HT306-28 is a set of 2.8mm 6-way universal breakout Leads to attach to automotive connectors.Also available in 0.6, 1.5, and 2.3mm sizes.
HT307 Acupuncture Probe Set
The Hantek HT307 is designed for probing difficult to reach signals which are protected by insulation.
Acupuncture probes can be fixed to the end of a standard Multimeter lead.
When it is necessary to probe signals in a cable loom, the acupuncture probe can be used. The probe is used by piercing the cable's insulation with its needle-like tip until the conductor is reached. The minute hole created in the insulation will normally close up, offering continued protection of the conductor. This makes it suitable for automotive applications.
HT308 HT Lead Extension
The Hantek HT308 is designed to extend a HT lead (coil to plug) to provide access for an ignition probe.