A2B Adapter Board
The A2B®Adapter Board provides an independent AD2428-based bus monitor that can be used to monitor A2B®systems.
It is designed for use with the Total Phase PROMIRA™, configured with the A2B®Bus Monitor: Level 1 Application.
Note: A2B®and Automotive Audio Bus' are registered trademarks of Analog Devices, Inc.
A2B Adapter Board Enclosure
A2B®Adapter Board Enclosure.
Note: The A2B®Adapter Board is not included with the enclosure.
£115.20 (save 3%)
A2B Bus Monitor
The Total Phase A2B® Bus Monitor includes everything needed to Monitor and Analyse the Automotive Audio Bus (A2B®). The tool has been developed in collaboration with Analog Devices, Inc, the creators of A2B®
The Monitor includes the Total Phase PROMIRA™, a high-performance tool for stimulating and analysing serial buses, an A2B®Bus Monitor, level 1 application, an A2B®Adapter Board used to interface to the A2B®Bus and the Data Centre Bus Analyser Software.
Note: A2B® and Automotive Audio Bus® are registered trademarks of Analog Devices, Inc.
£1,383.60 (save 4%)
A2B Bus Monitor - Level 1 Application
The Total Phase A2B®Bus Monitor Application provides unprecedented access to the A2B®system. It non-intrusively sniffs A2B®data on the in-vehicle audio line, giving users a real-time view into A2B®traffic on the bus. Additional features include:.
£969.23 (save 2%)
A2B Cable: Mini50 to Duraclick, 1m
The A2B®cable is a 30 cm, unshielded twisted pair cable. One end of the cable terminates in a Mini50 connector to connect to the A2B®Adapter Board. The other end terminates in a DuraClik connector for each connections to the full range of Analog Devices A2B®demo boards. The pins of the connectors are crossed, meaning that pin 1 of the Mini50 connector is connected to pin 2 of the DuraClik connector and vice versa.
A2B Cable:Mini50 to tinned ends, 30cm
This A2B®cable is a 30, centimetre, unshielded twisted pair cable. One end of the cable terminates in a Mini50 connector to connect to the A2B®Adapter Board. The other end provides un-terminated tinned ends.
Since the A2B®specification does not define a standard connector, the un-terminated ends allows users to attach any connector necessary for their application.
AC Current Click Board
The AC Current Click Board™ can measure alternating currents up to 30A. It features the MCP3201 ADC (analog to digital) converter and the MCP607 CMOS Op Amp, both from Microchip. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over an SPI interface, and the AN pin on the MikroBUS™ interface.
AC Current Click Board™ can only be used for sensors with voltage output (30A input current).
AC Current Click Board - bundle
With AC Current Clixck Board bundle (AC Current Click Board™ + AC Current Sensor) you will be able to measure alternating currents up to 30A. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over an SPI interface, and the AN pin on the MikroBUSline.
AC Current sensor
The AC Current sensor is a non-invasive sensor for measuring alternating current. This split-core type of sensor can be clipped around either a live or neutral wire.
£22.80 (save 6%)
AC Plug - Argentina (SYS1541 Series)
AC Plug - India. An connector to allow the Sunny range of power supply units to be used within Argentina.
AC Plug - Australia (SYS1541 Series)
AC Plug - India. An connector to allow the Sunny range of power supply units to be used within Australia.