The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

Push-On Cables

Push-On Cables


Products

GRIP-10 10-Pin gripper for non-locking Tag Connect cables

10-Pin gripper for non-locking Tag Connect cables

GRIP-10

10 in stock

£18.00

(from 1 to 10)

GRIP-14 14-Pin gripper for non-locking Tag Connect cables

14-Pin gripper for non-locking Tag Connect cables

GRIP-14

9 in stock

£18.00

(from 1 to 9)

GRIP-6 6-Pin gripper for non-locking Tag Connect cables

6-Pin gripper for non-locking Tag Connect cables

GRIP-6

10 in stock

£18.00

(from 1 to 10)

Tag Connect TC2030-CTX-20-NL Cable

The Tag-Connect TC2030-CTX-NL-20 Push-On cable has a 6-pin TC2030 Tag-Connector and a 20-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex debug Connector used by debuggers such as Keil's ULINK-2.

TC2030-CTX-20-NL

25 in stock

£62.70

(from 1 to 25)

Tag Connect TC2030-CTX-NL Cable

The Tag-Connect TC2030-CTX-NL Push-On cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex debug Connector used by debuggers such as Keil's ULINK-2.

TC2030-CTX-NL

25 in stock

£51.00

(from 1 to 25)

Tag Connect TC2030-CTX-NL-STDC14 for STLink v3

6-Pin Legged TC2030 Plug-of-Nails™ programming cable for use with STM32 processors with STLINK-V3 and STLINK-V3MINI.
Note: This STDC14 cable was previously known as TC2030-CTX-NL-ST14.


This special cable has a 6-pin TC2030 Tag-Connector and a 14-pin ribbon connector that mates with the STDC14 (FTSH-107) style micro-header found on the STLINK-V3 and STLINK-V3MINI providing the signals necessary for the SWD protocol on the STM32 MCU including SWO.


See also the TC2030-CTX-STDC14 “Legged” version of the cable with footprint that saves over 66% of the board space needed by typical FTSH-107 style micro headers!

TC2030-CTX-NL-STDC14

5 in stock

£51.00

(from 1 to 5)

Tag Connect TC2030-IDC-NL Cable

The Tag Connect TC2030-IDC-NL 6-Pin, 6" No-Legs Cable with Ribbon connector.

TC2030-IDC-NL

38 in stock

£56.10

(from 1 to 38)

Tag Connect TC2030-IDC-NL-10 Cable

The Tag Connect TC2030-IDC-NL-10 6-Pin, 10"  No-Legs Cable with Ribbon connector.

TC2030-IDC-NL-10

2 in stock

£58.20

(from 1 to 2)

Tag Connect TC2030-MCP-NL Cable

The Tag Connect TC2030-MCP-NL cable is 152mm (6") long, as recommended by Microchip for PIC debugging applications.

TC2030-MCP-NL

18 in stock

£45.70

£38.40 (save 16%)

(from 1 to 18)

Tag Connect TC2030-MCP-NL-10 Cable

The Tag Connect TC2030-MCP-NL-10 cable is 254mm (10") long; offering the greatest flexibility for hard to reach boards. However, for fast interfaces the shortest cable length is recommended and this should be borne in mind as long cables may prove to be unreliable in a few cases".

TC2030-MCP-NL-10

13 in stock

£58.20

(from 1 to 13)

Tag Connect TC2050-IDC-NL Cable

The Tag Connect TC2050-IDC-NL 10-Pin No-Legs Cable with Ribbon connector.

TC2050-IDC-NL

10 in stock

£56.10

(from 1 to 10)

Tag Connect TC2050-IDC-NL-430 Cable

The Tag Connect TC2050-IDC-NL-430 is a No Leg Cable for use with MSP430 / FET430.

TC2050-IDC-NL-430

8 in stock

£56.10

(from 1 to 8)