The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

PCI Test Backplane

PCI Test Backplane

SKU-014-01 PCI Test Backplane | Amfeltec UK
SKU-014-01 PCI Test Backplane | Amfeltec UK
Market Price: $930.18
Our Price: $845.61
You Save




The SKU-014-01 PCI Test Backplane by Amfeltec is designed to expand the x1 PCI Express interface of the host computer into 4 32-bit PCI slots for production, testing and debugging purposes. This test backplane allows you to test up to 4 PCI boards at the same time, along with facilitating easy access to logic signals, providing hot-swap compatibility and protecting each slot from overcurrent.

By getting access to the PCI bus JTAG signals, this backplane can be used as a universal device that helps in support programming/loading FPGA/CPLD during production testing. Moreover, an oscilloscope or a logic analyzer can be connected to the PCI bus debug connector to verifying the PCI signals.

  • Four 32-bit PCI slots
  • Connects to the host computer via standard CAT6 cable and x1 PCI Express host board
  • Supports both 5V and 3.3V PCI add-in cards
  • Easy Plug-and-Play installation
  • Compliant with PCI Local bus specification 3.0
  • Compliant with PCI Express base specification 2.0
  • Supports hot-swap operation
  • Per-slot power monitoring, and over-current protection
  • Per-slot access to the PCI bus JTAG Boundary Scan signals to support board level testing/programming
  • Test point header array with all PCI bus signals for logic analyser hookup
  • Supports Amfeltec In-Circuit Programmer/Loader (eLoader™)
  • Powered by a standard ATX Power Supply
  • Mounting holes based on ATX Specification 2.0
  • Operation temperature: 0°C to +75°C
  • Dimensions (W x D): 200mm x 195mm
SKU SKU-014-01
Warranty 12 months
Manufacturer Amfeltec Corp
Weight 0.50 Kg
In stock 2 in stock
Lead Time (if not in stock) 3 working days

The Amfeltec PCI Test Backplane is designed to allow developers to produce, test and debug PCI-based peripheral boards with a host computer. This backplane expands the existing PCI slot of the host motherboard into four slots for devices to be tested. The PCI express host card connects to the PCI Express slot of the motherboard and the backplane connects to the host board with the help of a standard CAT6 cable and a 10 wires flat cable. This PCI Test Backplane prevents any damage to the host computer during programming, debugging and testing process while allowing you to keep the host computer away from the testing area to free up space.

Power Control

Bus switches allows you to easily connect/disconnect the four 32-bit PCI connectors without shutting down the host system, allowing you to easily replace the plugged in devices and reducing the verifying and testing time. Each PCI connector has a dedicated power controller that is independent of each other and has over current and under voltage protection.

JTAG Interfaces

The four connectors provided on the PCI Backplane provide easy access to the PCI bus JTAG signals via an external programmer/emulator. These connectors allow you to run JTAG production tests, use the JTAG emulator debugging of devices under test, and/or use Amfeltec In-Circuit Programmer/Loader to program/load CPLD/FPGA/MCPU on the test unit during production or debugging cycle.

Status LEDs

Surface mounted LEDs provided on the backplane indicate main power status, power controller status for each PCI slot and the upstream PCI express connection status. A debug connector is provided will all PCI signals, which aids in probing or connecting the signals to a logic analyser.

Amfeltec Test Backplanes

See how Amfeltec test backplanes can help you test PC cards in a development environment.
  • PCI Test backplane (1)
  • x1 PCI express host card (1)
  • 2.1m (7ft) CAT6 cable (1)
  • 2.1m (7ft) control flat cable (1)
  • Live-insertion software under Windows/Linux/FreeBSD OS (1)
  • User manual (1)
There have been no reviews
Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
Power Adapter, UK connector

Power Adapter, UK connector



EasyMx PRO

EasyMx PRO



PEEDI Debugger/Programmer for ARM11

PEEDI Debugger/Programmer for ARM11