Multimeter Accessories

Two probes are supplied: one red and one, black.

Simply connect to any lead terminated with a 4mm plug (Banana Plug).

The probes are supplied with min-shrouds to protect the tip from inadvertently shorting the probe against conductors close to the measuring point.

The Hantek HT307 is designed for probing difficult to reach signals which are protected by insulation.

Acupuncture probes can be fixed to the end of a standard Multimeter lead.

When it is necessary to probe signals in a cable loom, the acupuncture probe can be used. The probe is used by piercing the cable's insulation with its needle-like tip until the conductor is reached. The minute hole created in the insulation will normally close up, offering continued protection of the conductor. This makes it suitable for automotive applications.

The PicoTest M3500-Opt01 multipoint scanner card lets you select an input or and scan up to 10-channels of input signals.

The PicoTest M3500-Opt02 when used with the thermocouple adapter, supports 7 types: E, J, K, N, R, S and t thermocouples.

The PicoTest M3500-Opt03 BNC to Banana Plug adapter for the PicoTest M3500A Digital Multimeter.

The PicoTest M3500-Opt04 GPIB interface card for the M3500A, M3510A and M3511A digital multimeters.

The PicoTest M3500-Opt05 probe adapter supports PT-100 type RTDs for the M3500A digital multimeter.

The PicoTest M3500-Opt06 RS-232C interface for the M3500A, M3510A and M3511A digital multimeters.

The PicoTest M3500-Opt07 Kelvin probes for the M3500A, M3510A and M3511A digital multimeters.

The PicoTest M3500-Opt08 4-wire Test leads for the M3500A, M3510A and M3511A digital multimeters.

The PicoTest M3500-Opt10 Shorting Plug for the M3500A, M3510A and M3511A digital multimeters.

The PicoTest M3500-Opt11 Type K thermocouple cable for the M3500A, M3510A and M3511A digital multimeters.