Passive Probes

Products: 16 of 6
  • Hantek HT30A BNC Cable with Banana Plugs

    Multimeter leads are convenient for measuring voltages on current by probing with a multimeter.  

    Wouldn't it be convent to use multimeter probes with an oscilloscope?  Well, now you can.  This BNC cable is terminated with shrouded 4mm plugs (banana plugs), which means they can be connected to multimeter probes or plugged into any 4mm socket.  Using a scope probe, that's almost impossible!

    Not rated yet
    • $25.28
    • Including 20% UK VAT*
  • Hantek HT324 BNC Test Leads with crocodile clips

    This cable is ideal for use with an oscilloscope for hooking onto terminals or large leads, which a conventional oscilloscope probe cannot easily connect.

    Bear in mind that the lead is not terminated so is not designed for high-frequency applications.

    When used with a signal generator with a BNC output terminal, the lead provides a convenient connection for injecting signals onto component leads and terminals.

    Not rated yet
    • $16.63
    • Including 20% UK VAT*
  • Hantek PP-150 150MHz Oscilloscope Probe
    • 34% less

    Hantek PP-150 150MHz Oscilloscope Probe

    The Hantek PP-150 oscilloscope probe kit is fitted with a slide switch to select x1 or x10 attentuation. It has a 150MHz bandwidth.

    The probe is suitable for use with all Hantek and third-party digital and analogue oscilloscopes as it is fitted with a standard BNC connector.

    Not rated yet
    • $21.29
    • Including 20% UK VAT*
  • Hantek PP-200 200MHz Oscilloscope Probe
    • 9% less

    Hantek PP-200 200MHz Oscilloscope Probe

    The Hantek PP-200 oscilloscope probe kit is fitted with a slide switch to select x1 or x10 attentuation. It has a 200MHz bandwidth.

    The probe is suitable for use with all Hantek and third-party digital and analogue oscilloscopes as it is fitted with a standard BNC connector.

    Not rated yet
    • $29.28
    • Including 20% UK VAT*
  • Hantek PP-300 300MHz Oscilloscope Probe
    • 58% less

    Hantek PP-300 300MHz Oscilloscope Probe

    The Hantek PP-300 oscilloscope probe kit is fitted with a slide switch to select x1 or x10 attentuation. It has a 300MHz bandwidth.

    The probe is suitable for use with all Hantek and third-party digital and analogue oscilloscopes as it is fitted with a standard BNC connector.

    Not rated yet
    • $33.27
    • Including 20% UK VAT*
  • Hantek PP-80 60MHz Oscilloscope Probe
    • 9% less

    Hantek PP-80 60MHz Oscilloscope Probe

    The Hantek PP-80 oscilloscope probe kit is fitted with a slide switch to select x1 or x10 attentuation. It has a 80MHz bandwidth.

    The probe is suitable for use with all Hantek and third-party digital and analogue oscilloscopes as it is fitted with a standard BNC connector.

    Not rated yet
    • $19.96
    • Including 20% UK VAT*

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.