Test Adapters

Products: 116 of 17
  • Tag Connect ARM20-CTX 20-Pin to TC2030-IDC Adapter

    The Tag-Connect ARM20-CTX adapter board allows the Tag-Connect TC2030-IDC cables to be used for ARM SWD (Single Wire Debug) applications. Although intended for use with our patented TC2030-IDC (and TC2030-IDC-NL) Plug-of-Nails™ Cables, the adapter may be useful to people wishing to use 6-pin 0.1” ribbon headers on their PCB instead of the traditional 20-Pin header.

    Note: Only the Adapter supplied. The TC2030-IDC or TC2030-IDC-NL cable is purchased separately, the cables and Segger JLINK seen in the picture are not included!

    Not rated yet
    • $53.09
    • Including 20% UK VAT*
  • Tag Connect SPY‐BI‐TAG; MSP430 SPY‐BI‐WIRE to TC2030‐MCP Adapter

    TC2030‐MCP to SPY‐BI‐WIRE adapter board which allows use of our Tag‐Connect TC2030‐MCP series Plug‐of‐Nails™ cables with later versions of TI’s MSP430 MCU that support the SPY‐BI‐WIRE (2‐Wire) JTAG interface.

    Not rated yet
    • $53.09
    • Including 20% UK VAT*
  • Tag Connect SPY‐BI‐TAG: MSP430 SPY‐BI‐WIRE to TC2030‐MCP Adapter

    TC2030‐MCP to SPY‐BI‐WIRE adapter board which allows use of our Tag‐Connect TC2030‐MCP series Plug‐of‐Nails™ cables with later versions of TI’s MSP430 MCU that support the SPY‐BI‐WIRE (2‐Wire) JTAG interface.

    With 330 ohm  protection resistor fitted.

    Not rated yet
    • $51.21
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-ADI Adapter

    The TC-ADI adapter works with Analog Devices SHARC and other ADI devices. It is designed to work with our 10-pin TC2050-IDC and TC2050-IDC-NL cables and gives the same 10-pin target board footprint for ARM JTAG that we’ve established with our TC2050-ARM2010 adapter.

    Not rated yet
    • $49.90
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-ADI-F

    The TC-ADI-F, female adapter works with Analog Devices SHARC and other ADI devices and is compatible with standard programmers and debuggers for these devices.

    Not rated yet
    • $53.09
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-ADI-M Adapter

    The TC-ADI-M adapter works with Analog Devices SHARC and other ADI devices. It is designed to work with our 10-pin TC2050-IDC and TC2050-IDC-NL cables and gives the same 10-pin target board footprint for ARM JTAG that we’ve established with our TC2050-ARM2010 adapter.

    Not rated yet
    • $53.09
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-C2000-F-180 Adapter

    The TC-C2000-F-180 adapter has female 0.1″ pitch connector with no key.

    Not rated yet
    • $65.27
    • Including 20% UK VAT*
  • Tag Connect TC-C2000-F-90 Adapter

    The TC-C2000-F-90 adapter has female 0.1″ pitch connector with no key.

    Not rated yet
    • $65.27
    • Including 20% UK VAT*
  • Tag Connect TC-C2000-M Adapter

    The TC-C2000-M Adapter is used to connect the Tag Connect TC2050-IDC Pogo-pin cable to a TI C2000 hardware debugger, such as the XDS110 JTag Debugger.

    Not rated yet
    • $65.27
    • Including 20% UK VAT*
  • Tag Connect TC-FOOTPRINT-PCB Footprint Demo PCB

    Tag Connect Footprint PCB.

    Not rated yet
    • $6.25
    • Including 20% UK VAT*
  • Tag Connect TC-LATTICE Adapter

    Adapter for Lattice HW-USBN-2B Programming Cable.

    The TC-LATTICE Adapter allows users of Lattice's HW-USBN-2B Programming Cable to use Tag-Connect TC2030-IDC or TC2030-IDC-NL cable instead of the supplied flying lead solution for programming various Lattice Semiconductor devices.

    Not rated yet
    • $40.60
    • Including 20% UK VAT*
  • Tag Connect TC-LATTICE-10 Adapter

    Adapter allows users of Lattice’s HW-USBN-2B Programming Cable with Tag-Connect TC2050-IDC or TC2050-IDC-NL Plug-of-Nails™ cables for programming various Lattice Semiconductor devices. 

    note: adapter only, cable not included. 

    Not rated yet
    • $49.90
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-RENESAS Adapter

    The Tag Connect TC2050-RENESAS adapter for Renesas E1 and E8a debuggers.

    Not rated yet
    • $53.09
    • Including 20% UK VAT*
  • Tag Connect TC-XILINX6

    Adapter for 2mm 14‐pin Header found on Xilinx’s Platform Cable II and compatible programmers. Primarily intended for use with our patented TC2050‐IDC Plug-of-Nails™ cable.

    Not rated yet
    • $49.90
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC-XILINX6-M Xilinx

    Adapter designed to be plugged into a Female 2mm 14-pin header found on programming cables for Xilinx such as Digilent JTAG-HS2 and Digilent JTAG-HS3. For use with TC2030‐IDC Plug-of-Nails™ cables.

    Not rated yet
    • $49.90
    • Including 20% UK VAT*
    Order Now
  • Tag Connect TC2050-2X10 Adapter

    Adapter allowing two of our TC2050-IDC 10-pin cables to be used in applications that would normally demand a single 20-pin ribbon connection.

    Not rated yet
    • $58.40
    • Including 20% UK VAT*
Products: 116 of 17

Bestsellers

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.