Non-locking Cables

Products: 116 of 21
  • Tag Connect TC2030-ALT-NL Non-Locking Cable

    The TC2030-ALT-NL cable is a special programming cable that has a TC2030 Tag-Connector at one end and a 10-pin 0.1″ pitch female IDC connector at the other. The 10-pin IDC can be plugged directly into some Altera USB Blasters and ByteBlasters.

    Not rated yet
    • $76.52
    • Including 20% UK VAT*
  • Tag Connect TC2030-CTX-20-NL Cable

    The Tag-Connect TC2030-CTX-NL-20 Push-On cable has a 6-pin TC2030 Tag-Connector and a 20-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex debug Connector used by debuggers such as Keil's ULINK-2.

    Not rated yet
    • $66.69
    • Including 20% UK VAT*
  • Tag Connect TC2030-CTX-NL 6-pin Cable

    The Tag-Connect TC2030-CTX-NL Push-On cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex debug Connector used by debuggers such as the IAR i-Jet or Keil ULINK PRO.

    Not rated yet
    • $54.25
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
  • Tag Connect TC2030-CTX-NL-STDC14 Cable

    6-Pin “No legs” TC2030-NL Plug-of-Nails™ programming cable for use with STM32 processors with STLINK-V3 or STLINK-V3MINI that use the STDC14 connector.

    Note: This STDC14 cable was previously known as TC2030-CTX-NL-ST14.

    This special cable has a 6-pin TC2030 Tag-Connector and a 14-pin ribbon connector that mates with the STDC14 (FTSH-107) style micro-header found on the STLINK-V3 and STLINK-V3MINI providing the signals necessary for the SWD protocol on the STM32 MCU including SWO.

    See also the TC2030-CTX-STDC14 Legged version of the cable more suitable for development work.

    If you need all 14-pins connected to your target board see instead the TC2070-IDC-NL-050 cable.

    Not rated yet
    • $67.65
    • Including 20% UK VAT*
  • Tag Connect TC2030-ICESPI-NL Non-Locking Cable

    Not rated yet
    • $89.28
    • Including 20% UK VAT*
  • Tag Connect TC2030-IDC-NL Cable
    • 15% less

    Tag Connect TC2030-IDC-NL Cable

    The Tag Connect TC2030-IDC-NL 6-Pin, 6" No-Legs Cable with Ribbon connector.

    Not rated yet
    • $59.67
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
  • Tag Connect TC2030-IDC-NL-10 Cable

    The Tag Connect TC2030-IDC-NL-10 6-Pin, 10"  No-Legs Cable with Ribbon connector.

    Not rated yet
    • $61.91
    • Including 20% UK VAT*
  • Tag Connect TC2030-MCP-NL Cable
    • 30% less

    Tag Connect TC2030-MCP-NL Cable

    The Tag Connect TC2030-MCP-NL cable is 152mm (6") long, as recommended by Microchip for PIC debugging applications.

    Not rated yet
    • $40.84
    • Including 20% UK VAT*
  • Tag Connect TC2030-MCP-NL-10 Cable

    The Tag Connect TC2030-MCP-NL-10 cable is 254mm (10") long; offering the greatest flexibility for hard to reach boards. 

    However, for fast interfaces the shortest cable length is recommended and this should be borne in mind as long cables may prove to be unreliable in a few cases.

    Not rated yet
    • $61.91
    • Including 20% UK VAT*
  • Tag Connect TC2030-PKT-NL Cable

    Not rated yet
    • $59.35
    • Including 20% UK VAT*
  • Tag Connect TC2030-PKT-SWD-NL Cable

    Not rated yet
    • $67.65
    • Including 20% UK VAT*
  • Tag Connect TC2030-SWIM-NL Cable

    TC2030 (no legs) to SWIM connector for use on ST-LINK/V2 for STM8 MCUs

    Not rated yet
    • $89.28
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
  • Tag Connect TC2030-USB-NL Cable

    USB A connector  to a TC2030 6-pin Plug-of-Nails™ “With Legs” connector. It brings the USB signals directly to your PCB.

    Not rated yet
    • $67.59
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
  • Tag Connect TC2050-IDC-NL Cable

    The Tag Connect TC2050-IDC-NL 10-Pin No-Legs Cable with Ribbon connector.

    Not rated yet
    • $59.67
    • Including 20% UK VAT*
  • Tag Connect TC2050-IDC-NL-050 Cable

    TC2050 10 Pin “No legs” Plug-of-Nails™ to 0.050″ pitch 10 pin ribbon connector suitable for ULINK2 and similar debuggers that use the Samtec FTSH-105-01 style micro-header.

    Not rated yet
    • $89.28
    • Including 20% UK VAT*
  • Tag Connect TC2050-IDC-NL-050-ALL-20 Cable

    10-pin Plug-of-Nails™ “No Legs” connector to 20-pin 0.050″ pitch ribbon connector suitable for ULINK2 and similar debuggers that use the Samtec FTSH-110-01 style micro-header.

    Not rated yet
    • $89.28
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
Products: 116 of 21

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.