Thermo 2 Click Board
The Thermo 2 Click Board™ is a measurement accessory board that includes DS1825, a programmable resolution 1-wire digital thermometer. The digital thermometer provides 9 to 12-bit centigrade temperature measurements and communicates over a 1-Wire bus. The DS1825 chip has a unique 64-bit serial code, which allows the user to connect multiple DS1825s to function on the same 1-Wire bus.
THERMO 2 Click Board™ has a measuring range between.
- Based on the DS1825
- Unique 1-Wire interface
- Sensitivity: -10
- User selectable 9 to 12-bit measurement resolution
- Measures temperature from -10 to +85
- Selectable mikroBUS pin output
- Unique 64-Bit Serial Code
- Converts temperature to 12-bit digital word within 750ms
- Four on-board jumpers for specifying sensor ID
- 3.3V power supply
IC/Module: DS1825 digital thermometer IC
DS1825 is a programmable digital thermometer with 9- to 12-bit centigrade temperature measurements. Featuring a unique 64-bit serial code, multiple DS1825s to function independently on the same 1-Wire bus. It derives power directly from the data line, which eliminates the need for an external power supply.
on-board SMD Jumpers
THERMO 2 Click includes a set of four on-board jumpers for specifying a unique address for the sensor. A separate jumper allows the user to select the sensor's output between two mikroBUS pins for the output: GP01 (AN pin) and GP0 (PWM pin).
- Thermo 2 Click Board (1)
- 1x8 male headers (2)
- Printed User Manual and Board Schematic (1)