USB UART 2 Board
Enable USB connectivity for prototype devices that have a UART interface with the new USB UART 2 Board. The board employs a USB-to-UART serial converter MCP2200, which enables user to add communication to the prototype device in a very economical way. The board comes with integrated USB termination resistors, which reduces the number of external components in the prototype device. It also comes with a mini-USB connector that supports full-speed USB. The fast and easy USB UART 2 Board allows data transfer through UART communication interface. It is designed to operate using a 5V power supply only. This USB-UART solution is designed with a small footprint and compact design. It has connection pads for all available pins.
- Based on the MCP2200 USB-to-UART serial converter IC
- Supports USB 2.0 Full Speed (12 Mbps)
- Features a standard 8-bit configurable I/O port
- Fitted with a mini-USB connector
- Integrated USB termination resistors
- Connection pads for all available pins
- 256 Bytes of User EEPROM
- Oscillator Input: 12 MHz
- Standard 2.54 mm pin spacing
- Small footprint, compact design
- Uses only a 5V power supply
- Industrial Operating Temperature: -40
IC/Module: MCP2200 USB-to-UART Serial Converter.
MCP2200 is a USB-to-UART serial converter that allows USB connectivity for prototype devices with UART interface. Designed for low power consumption, MCP2200 has 256 bytes of integrated user EEPROM and eight GPIO pins.It also has a USB protocol controller, which is full-speed USB 2.0 compliant.
The on-board EEPROM module is a 256-byte array of non-volatile memory. The memory cells for data EEPROM are capable of enduring thousands of erase/write cycles, up to 100K for EEPROM. It allows for data retention without refresh for more than 40 years. The memory locations are retrieved for read/write operations through USB host commands.
USB UART 2 Board uses the UART (Universal Asynchronous Receiver/Transmitter) interface and supports baud rates of 300-1000k. It has hardware flow control and UART signal polarity option. It has eight general purpose I/O pins.
USB UART 2 Board User Manual
- USB UART 2 Board (1)