Lipowsky Industrie Elektronik GmbH
SKU: 8001058Lipowsky Baby-LIN-3-RCplus LIN Bus Simulator
Lipowsky Baby-LIN-3-RCplus LIN Bus Simulator
Couldn't load pickup availability
Key Features
Powerful Processing Capabilities
- 480MHz Cortex M7 processor for 60% faster SDF execution speed compared to previous models
- 32MB RAM
- Support for future SDF protocol extensions
Enhanced Connectivity
- High-speed 480MBit/s USB 2.0 interface with USB-C connector
- Galvanically isolated communication interfaces prevent interference
Flexible Power Supply
- 8-26V DC compatible
- Powered via USB or LIN bus
Intuitive Built-in Controller
- Integrated membrane keyboard with nine keys
- 1.54" color display (240x240 pixels)
- Customizable interface for remote bus control
Rugged and Compact Form Factor
- Small size - 92 x 66 x 28mm
- Operating range -20°C to +60°C
- IP20 protection rating
LIN/CAN Bus Simulation Capabilities
The Baby-LIN-3-RCplus can simulate any number of LIN and CAN bus nodes from a single node up to the entire bus. This allows for various test configurations:- LIN bus master to operate slave nodes
- LIN/CAN bus slave behaviours
- Complete residual bus simulations
- Passive bus monitoring without simulations
Included LINWorks Software Suite
The Baby-LIN-3-RCplus comes with a license for the LINWorks suite to manage LIN/CAN bus projects. Key features:- LDF editing
- SD file creation
- Bus simulation
- Monitoring, logging and analyzing bus traffic
- Custom application development using the Baby-LIN DLL
The Lipowsky Baby-LIN-II is a compact and cost-effective way to control LIN-Bus equipped devices with the help of a USB port of a standard computer. This controller features an integrated 32-bit microcontroller that is responsible for important tasks like LIN-bus protocol decoding and message scheduling. It comes with the LINWorks software suite that contains application programs, which along with a DLL, allows you to access the LIN-Bus of the controller. The LIN-Bus can also be accessed directly by the DLL-API that is easy to use and allows you to fetch or put frames, respective signals to the LIN-Bus.
One of the most unique features of Baby-LIN is that it can be powered either the USB port or from the LIN-Bus, allowing it to be as a standalone device, without a computer. The macro feature of this LIN-Bus allows it to store commands sequences, which can be later used for various tasks like, running an endless loop of tests on a LIN-equipped ECU.
The voltage provided at the LIN-Bus side can vary between 9 volts to 36 volts, and since the LIN-bus is isolated from the USB side, there are no electrical interference between the computer and on board electronics of the controller. The flash-based firmware storage of the Baby-LIN allows easy updates and changes of the LIN-bus specifications.
The LINWorks software suite that comes along with the Baby-LIN features various application programs. The LDF-Editor allows you to create, inspect, and edit LDFs. The Session Configurator allows you to define additional session parameters, like choosing which nodes should be available and which nodes should be simulated. It allows the Baby-LIN to play the role of both, master and slave nodes. The LIN-Bus can also work without any slave nodes, simulating all nodes at the same time.
Lipowsky Baby-LIN-3-RCplus LIN Bus Simulator
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.